| Age | Commit message (Collapse) | Author |
|---|
|
|
|
src/libsystemd/sd-bus/bus-common-errors.h
Stuff in src/shared/ should not use stuff from src/libsystemd/ really.
|
|
check /proc/1/environ
This way, we should be in a slightly better situation if a container is
booted up with only a shell as PID 1. In that case
/run/systemd/container will not be populated, and a check for it hence
be ineffective.
Checking /proc/1/environ doesn't fully fix the problem though, as the
file is only accessible with privileges. This means if PID 1 is not
systemd, and if privileges have been dropped the container detection
will continue to fail.
|
|
loop_write() didn't follow the usual systemd rules and returned status
partially in errno and required extensive checks from callers. Some of
the callers dealt with this properly, but many did not, treating
partial writes as successful. Simplify things by conforming to usual rules.
|
|
This way, we can ensure we have a more complete, up-to-date list of
capabilities around, always.
|
|
Let's add some syntactic sugar for iterating through inotify events, and
use it everywhere.
|
|
When dbus client connects to systemd-bus-proxyd through
Unix domain socket proxy takes client's smack label and sets for itself.
It is done before and independent of dropping privileges.
The reason of such soluton is fact that tests of access rights
performed by lsm may take place inside kernel, not only
in userspace of recipient of message.
The bus-proxyd needs CAP_MAC_ADMIN to manipulate its label.
In case of systemd running in system mode, CAP_MAC_ADMIN
should be added to CapabilityBoundingSet in service file of bus-proxyd.
In case of systemd running in user mode ('systemd --user')
it can be achieved by addition
Capabilities=cap_mac_admin=i and SecureBits=keep-caps
to user@.service file
and setting cap_mac_admin+ei on bus-proxyd binary.
|
|
As kdbus no longer exports this, remove all traces from sd-bus too
|
|
The ELF magic cannot work for consumers of our shard library, since they
are in a different module. Hence make all the ELF magic private, and
instead introduce a public function to register additional static
mapping table.
|
|
|
|
It's only exposed to userspace since
commit 685343fc3ba61a1f6eef361b786601123db16c28
Author: Tom Gundersen <teg@jklm.no>
AuthorDate: Mon Jul 14 16:37:22 2014 +0200
Commit: David S. Miller <davem@davemloft.net>
CommitDate: Tue Jul 15 16:12:01 2014 -0700
to the kernel.
|
|
..so make them cry and print a warning if __NR_memfd_create is not
defined. This should make syscall() fail with -ENOSYS, thus trigger a
suitable runtime error-path.
|
|
|
|
We need original socket_fd around otherwise mac_selinux_get_child_mls_label
fails with -EINVAL return code. Also don't call setexeccon twice but rather pass
context value of SELinuxContext option as an extra argument.
|
|
|
|
the first byte of it
|
|
|
|
environ is already defined in unistd.h
|
|
|
|
machine-id
If /etc was read only at boot time with an empty /etc/machine-id, the latter
will be mounted as a tmpfs and get reset at each boot. If the system becomes rw
later, this functionality enables to commit in a race-free manner the
transient machine-id to disk.
|
|
Use these in networctl.
|
|
|
|
|
|
|
|
https://bugs.debian/org/771397
|
|
|
|
Fixes CID #1237772.
|
|
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
The one in tmpfiles.c:create_item() even looks like it fixes a bug.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
Simplify unit_name_mangle() and unit_name_mangle_with_suffix() to
always behave the same, and only append a suffix if there is no
type suffix. If a user says 'isolate blah.device' it is better to
return an error that the type cannot be isolated, than to try to
isolate blah.device.target.
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
"addresses"
|
|
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
It was not passing the error argument.
|
|
This enables us to write things like this:
int open_some_file(void) {
fd = open("/dev/foobar", O_RDWR|O_CLOEXEC);
if (fd < 0)
return log_error_errno(errno, "Failed to reboot: %m");
return fd;
}
Which is function that returns -errno on failure, as well as printing an
error message, all in one line.
|
|
|
|
in log_struct()
That way the caller may use %m to print the specified error.
|
|
sd_bus_error_set_errno() allows negative errors too, hence, be equally
nice.
|
|
Also, while we are at it, introduce some syntactic sugar for creating
ERRNO= and MESSAGE= structured logging fields.
|
|
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
|
|
log_error_errno() as log calls that take error numbers
This change has two benefits:
- The format string %m will now resolve to the specified error (or to
errno if the specified error is 0. This allows getting rid of a ton of
strerror() invocations, a function that is not thread-safe.
- The specified error can be passed to the journal in the ERRNO= field.
Now of course, we just need somebody to convert all cases of this:
log_error("Something happened: %s", strerror(-r));
into thus:
log_error_errno(-r, "Something happened: %m");
|
|
A strv might be NULL if it is empty. The txt.strings comparison doesn't
take that into account. Introduce strv_equal() to provide a proper helper
for this and fix resolve to use it.
Thanks to Stanisław Pitucha <viraptor@gmail.com> for reporting this!
|
|
Make screened character set consistent with unit_name_mangle() by splitting off
the escaping loop into a separate function.
Before this fix, unit names such as `foo@bar.target` would get transformed
into `foo\x40bar.target` when unit_name_mangle_with_suffix() is used.
https://bugs.freedesktop.org/show_bug.cgi?id=86711
|
