| Age | Commit message (Collapse) | Author |
|---|
|
CID #1354671: char **l would be leaked.
Also rename l to paths, to make the code easier to read,
and do strv deduplication immediately when extending. No need to allocate
strings to remove them a few lines down.
|
|
The coccinelle patch didn't work in some places, I have no idea why.
|
|
This new command removes all, or all hidden container images that have been
downloaded.
|
|
We don#t really support systems where XDG_RUNTIME_DIR is not supported for
systemd --user. Hence, let's always set our own XDG_RUNTIME_DIR for tests that
involve systemd --user, so that we know it is set, and that it doesn't polute
the user's actual runtime dir.
|
|
This allows dropping all user configuration and reverting back to the vendor
default of a unit file. It basically undoes what "systemctl edit", "systemctl
set-property" and "systemctl mask" do.
|
|
|
|
Exit early, so that we can get rid of the large if block.
|
|
We only use it inside of install.c, hence let's make it static.
|
|
The SysV compat code checks whether there's a native unit file before looking
for a SysV init script. Since the newest rework generated units will show up in
the unit path, and hence the checks ended up assuming that there always was a
native unit file for each init script: the generated one.
With this change the generated unit file directory is suppressed from the
search path when this check is done, to avoid the confusion.
|
|
Let's keep the code that manipulates LookupPaths together, and move
generator_binary_paths() to the end of the .h and .c files, since it is not
strictly related to that.
|
|
Move the search path check from the SysV service compat support into install.c
so that we can reuse the usual algorithm instead of rolling a private loop for
this.
|
|
This patch adds a concept of a "control" unit file directory, which is supposed
to be used as place for unit file drop-ins created by "systemctl set-property"
(note that this directory is not actually hooked up to "systemctl set-property"
yet, that's coming in a later patch).
The rationale for this: previously changes made by the user and by "systemctl
set-property" were done in the same directory, which made semantics very
unclear: the changes made by "systemctl set-property" were applied instantly,
and their drop-ins only written to not lose settings on a later "systemctl
daemon-reload", while drop-ins made by the user would only be in effect after
"systemctl daemon-reload". This is particular problematic as the changes made
by "systemctl set-property" would really apply immediately without any respect
for the unit search path. This meant that using "set-property" could have an
effect that is lsot as soon as "daemon-reload" is issued, in case there was a
"later" drop-in already in place.
With this change the directories are seperated, and the "control" directory
always takes the highest priority of all, to avoid any confusion.
|
|
This is too confusing, as this funciton returns the paths to the generator
binaries, while usually when we refer to the just the "generator path" we mean
the generated unit files. Let's clean this up.
|
|
It's very similar to the mkdir and trim operations for the generator dirs,
hence let's unify this at a single place.
|
|
See: #2864
|
|
a new function
Let's replace repeated code by a single implementation in a single function.
|
|
Now, that the search path logic knows the unit path for transient units we also
can introduce an explicit unit file state "transient" that clarifies to the
user what kind of unit file he is encountering.
|
|
Previously, we'd execute some operations with the root prefix applied, while
others without (which was a bug). Clean this up: all paths are now prefixed
properly with the root path, and we strip it off when necessary.
(Of course, an alternative option would be to strictly pass around paths
without the prefix prepended and only prepend it right before hitting the disk,
however, I am came to the conclusion this would result in more code.)
|
|
Let's make the suffix it appends configurable. This way we can reuse it at a second place.
|
|
Let's modernize these calls a bit.
Also, don't call them from user_dirs() anymore, as we already have both dirs in
the list a second time via the persistent_config and runtime_config function
parameters.
|
|
user_runtime_dir() and user_config_home() are not used externally anymore,
hence let's not export them anymore.
|
|
Move this into a function of its own, so that we can run it after we ran the
generators, so that it takes into account removed generator dirs.
|
|
functions
|
|
Previously, transient units were created below the normal runtime directory
/run/systemd/system. With this change they are created in a special transient
directory /run/systemd/transient, which only contains data for transient units.
This clarifies the life-cycle of transient units, and makes clear they are
distinct from user-provided runtime units. In particular, users may now
extend transient units via /run/systemd/system, without systemd interfering
with the life-cycle of these files.
This change also adds code so that when a transient unit exits only the
drop-ins in this new directory are removed, but nothing else.
Fixes: #2139
|
|
After all, for test builds they might differ from /etc/systemd/{user|system},
hence they should be included.
|
|
We use the root directory parameter while putting together the LookupPaths
structure, hence let's also store it in the structure as-is. That way we can
drop a parameter from half of the functions in install.c
Also, let's move the validation of the root paths into lookup_paths_init() so
that we can drop even more code from install.c
|
|
Similar to the other calls that operate on the collected path data.
|
|
This way the funciton name matches nicely our other calls path_is_config() and
path_is_runtime().
|
|
configuration
Let's actually check the runtime config dir, instead of just /run.
|
|
Previously, we had two enums ManagerRunningAs and UnitFileScope, that were
mostly identical and converted from one to the other all the time. The latter
had one more value UNIT_FILE_GLOBAL however.
Let's simplify things, and remove ManagerRunningAs and replace it by
UnitFileScope everywhere, thus making the translation unnecessary. Introduce
two new macros MANAGER_IS_SYSTEM() and MANAGER_IS_USER() to simplify checking
if we are running in one or the user context.
|
|
Now that the LookupPaths structure contains the directory paths, let's make use
of that everywhere instead of duplicating the logic.
|
|
Let's add a seperate fields for the directories where we place runtime and
persistent configuration, so that we can use this in install.c (to be added in
a later commit), and we store path information in the same place everywhere.
|
|
Let's be precise when the user tries to invoke an "enable" operation on a
generated unit file.
|
|
Now that we store the generator directories in LookupPaths we can use this to
intrdouce a new unit file state called "generated", for units in these
directories.
Fixes: #2348
|
|
A long time ago – when generators where first introduced – the directories for
them were randomly created via mkdtemp(). This was changed later so that they
use fixed name directories now. Let's make use of this, and add the genrator
dirs to the LookupPaths structure and into the unit file search path maintained
in it. This has the benefit that the generator dirs are now normal part of the
search path for all tools, and thus are shown in "systemctl list-unit-files"
too.
|
|
We don't need it anymore, give that sysv-generator can determine the path on
its own now.
|
|
All callers of create_symlink(), such as install_info_symlink_wants(), expect
that to return > 0 if it actually did something, and then return that number.
unit_file_enable() uses that to determine if any action was done
(carries_install_info != 0) and if not, show a "The unit files have no
[Install] section" warning.
Return 1 instead of 0 in the two code paths of create_symlink() when the link
was created or replaced with a new value.
This fixes getting a bogus "No [Install] section" warning when enabling a unit
with full path, like "systemctl enable /some/path/myunit.service".
|
|
Add `--value` option to systemctl and loginctl to only print values
|
|
|
|
On the server side we already bypass the polkit checks if the caller is root
(see the sd_bus_query_sender_privilege() call in bus_verify_polkit_async()). So
there is no reason to invoke polkit when running
systemctl/machinectl/loginctl/timedatectl as root.
Fixes #2748
|
|
With this option, systemctl will only print the rhs in show:
$ systemctl show -p Wants,After systemd-journald --value
systemd-journald.socket ...
systemd-journald-dev-log.socket ...
This is useful in scripts, because the need to call awk or similar
is removed.
|
|
Fix copy&paste bug in map_basic() to use the correct data type for
SD_BUS_TYPE_UINT32. Before we were copying the wrong 32 bits into the
destination pointer, resulting in complete garbage on big-endian systems.
Fixes #2927
|
|
build-sys: fix build with libgrcypt disabled
|
|
|
|
- Move gcrypt.h include inside grcrypt-util.h.
- Allow gcrypt-util.[ch] to be compiled even without gcrypt.
This allows the logic in files using gcrypt to be simplified.
- Fix compilation of systemd-resolve without gcrypt.
systemd-resolved already supported that.
Fixes #2711.
|
|
Fixes #2823.
Also remove unnecessary feof check.
|
|
Fixes:
Message: Process 806 (systemd-importd) of user 0 dumped core.
Stack trace of thread 806:
#0 0x00007f5eaeff7227 raise (libc.so.6)
#1 0x00007f5eaeff8e8a abort (libc.so.6)
#2 0x000055b6d3418f4f log_assert_failed (systemd-importd)
#3 0x000055b6d3409daf safe_close (systemd-importd)
#4 0x000055b6d33c25ea closep (systemd-importd)
#5 0x000055b6d33c38d9 setup_machine_directory (systemd-importd)
#6 0x000055b6d33b8536 method_pull_tar_or_raw (systemd-importd)
#7 0x000055b6d33ed097 method_callbacks_run (systemd-importd)
#8 0x000055b6d33ef929 object_find_and_run (systemd-importd)
#9 0x000055b6d33eff6b bus_process_object (systemd-importd)
#10 0x000055b6d3447f77 process_message (systemd-importd)
#11 0x000055b6d344815a process_running (systemd-importd)
#12 0x000055b6d3448a10 bus_process_internal (systemd-importd)
#13 0x000055b6d3448ae1 sd_bus_process (systemd-importd)
#14 0x000055b6d3449779 time_callback (systemd-importd)
#15 0x000055b6d3454ff4 source_dispatch (systemd-importd)
#16 0x000055b6d34562b9 sd_event_dispatch (systemd-importd)
#17 0x000055b6d34566f8 sd_event_run (systemd-importd)
#18 0x000055b6d33ba72a bus_event_loop_with_idle (systemd-importd)
#19 0x000055b6d33b95bc manager_run (systemd-importd)
#20 0x000055b6d33b9766 main (systemd-importd)
#21 0x00007f5eaefe2a00 __libc_start_main (libc.so.6)
#22 0x000055b6d33b5569 _start (systemd-importd)
|
|
binary_is_good translates ENOENT to 0
See https://github.com/systemd/systemd/commit/85eca92e#diff-bcad68c477b6651521e880c40b7a9b40R813
|
|
Enable more tests by default, and even more with `--enable-tests=unsafe`
|
|
|
