| Age | Commit message (Collapse) | Author |
|---|
|
Build would fail when assert was used on the same line in
different files #included together.
https://bugs.freedesktop.org/show_bug.cgi?id=87339
|
|
This is exposed the memory.usage_in_bytes cgroup property on the bus,
and makes "systemctl status" show it in its default output.
|
|
After 3637713a20 it is not necessary anymore.
|
|
With this change the pull protocol implementation processes will pass
progress data to importd which then passes this information on via the
bus. We use sd_notify() as generic transport for this communication,
making importd listen to them, while matching the incoming messages to
the right transfer.
|
|
|
|
shut up
|
|
This is how we call it internally, and also a bit more descriptive.
|
|
For ACLs to be valid, a set of entries for user, group, and other
must be always present. Always add those entries.
While at it, only add the mask ACL if it is actually required, i.e.
when at least on ACL for non-owner group or user exists.
|
|
This is much more useful in practice (equivalent to setfacl -m).
|
|
|
|
int[] should not be used as pid_t[], even if happens to be same thing.
Also deduplicating in a quadratic loop right before sorting is unnecessary.
Remove custom greedy_realloc implementation.
|
|
Types used for pids and uids in various interfaces are unpredictable.
Too bad.
|
|
|
|
gcc 5 started warning about this.
|
|
client to it
The old "systemd-import" binary is now an internal tool. We still use it
as asynchronous backend for systemd-importd. Since the import tool might
require some IO and CPU resources (due to qcow2 explosion, and
decompression), and because we might want to run it with more minimal
priviliges we still keep it around as the worker binary to execute as
child process of importd.
machinectl now has verbs for pulling down images, cancelling them and
listing them.
|
|
syslog priority
This is useful when we execute our own programs, reading output from its
STDERR, and want to retain priority information.
|
|
dpkg itself also uses *.dpkg-dist, while .dpkg-{bak,backup,remove} are being
used by dpkg-maintscript-helper.
|
|
This also adds an initial keyring for the verification, that contains
Ubuntu's and Fedora's key. We should probably add more entries sooner or
later.
|
|
This allows us to reuse a lot more code, and simplify pull-raw
drastically.
|
|
|
|
|
|
linux partition
This should allow running Ubuntu UEFI GPT Images with nspawn,
unmodified.
|
|
than "size"
After all, it's closer to the "du"-reported value than to the file
sizes...
|
|
to target
|
|
|
|
This remove the need for various header files to include the
(relatively heavyweight) util.h.
|
|
|
|
There were two callers, one can use strtod_l() and the other strptime_l().
(David: fix up commit-msg and coding-style)
|
|
|
|
/var/lib/container to /var/lib/machines
Given that this is also the place to store raw disk images which are
very much bootable with qemu/kvm it sounds like a misnomer to call the
directory "container". Hence, let's change this sooner rather than
later, and use the generic name, in particular since we otherwise try to
use the generic "machine" preferably over the more specific "container"
or "vm".
|
|
After all, nspawn can now dissect MBR partition levels, too, hence
".gpt" appears a misnomer. Moreover, the the .raw suffix for these files
is already pretty popular (the Fedora disk images use it for example),
hence sounds like an OK scheme to adopt.
|
|
This adds three kinds of file system locks for container images:
a) a file system lock next to the actual image, in a .lck file in the
same directory the image is located. This lock has the benefit of
usually being located on the same NFS share as the image itself, and
thus allows locking container images across NFS shares.
b) a file system lock in /run, named after st_dev and st_ino of the
root of the image. This lock has the advantage that it is unique even
if the same image is bind mounted to two different places at the same
time, as the ino/dev stays constant for them.
c) a file system lock that is only taken when a new disk image is about
to be created, that ensures that checking whether the name is already
used across the search path, and actually placing the image is not
interrupted by other code taking the name.
a + b are read-write locks. When a container is booted in read-only mode
a read lock is taken, otherwise a write lock.
Lock b is always taken after a, to avoid ABBA problems.
Lock c is mostly relevant when renaming or cloning images.
|
|
We initialize structs during declartion if possible
|
|
"read-only" concept for raw disk images, too
|
|
Unlike some client code suggests...
|
|
|
|
|
|
|
|
This adds two new settings to networkd's .network files:
IPForwarding=yes and IPMasquerade=yes. The former controls the
"forwarding" sysctl setting of the interface, thus controlling whether
IP forwarding shall be enabled on the specific interface. The latter
controls whether a firewall rule shall be installed that exposes traffic
coming from the interface as coming from the local host to all other
interfaces.
This also enables both options by default for container network
interfaces, thus making "systemd-nspawn --network-veth" have network
connectivity out of the box.
|
|
rules, using libiptc
|
|
|
|
cunescape_length_with_prefix() is called with the length as an
argument, so it cannot rely on the buffer being NUL terminated.
Move the length check before accessing the memory.
When an incomplete escape sequence was given at the end of the
buffer, c_l_w_p() would read past the end of the buffer. Fix this
and add a test.
|
|
We would ignore options like "fail" and "auto", and for any option
which takes a value the first assignment would win. Repeated and
options equivalent to the default are rarely used, but they have been
documented forever, and people might use them. Especially on the
kernel command line it is easier to append a repeated or negated
option at the end.
|
|
We would silently ignore them. One would have to be crazy
to do assign an out of range value, but simply ignoring it
bothers me.
|
|
This fixes parsing of options in shared/generator.c. Existing code
had some issues:
- it would treate whitespace and semicolons as seperators. fstab(5)
is pretty clear that only commas matter. And the syntax does
not allow for spaces to be inserted in the field in fstab.
Whitespace might be escaped, but then it should not seperate
options. Treat whitespace and semicolons as any other character.
- it assumed that x-systemd.device-timeout would always be followed
by "=". But this is not guaranteed, hasmntopt will return this
option even if there's no value. Uninitialized memory could be read.
- some error paths would log, and inconsistently, some would just
return an error code.
Filtering is split out to a separate function and tests are added.
Similar code paths in other places are adjusted to use the new function.
|
|
|
|
Generators are different than unit files: they are never automatically
generated, so there's no point in allowing /etc to override /run. On
the other hand, overriding /etc might be useful in some cases.
|
|
Sometimes it is necessary to stop a generator from running. Either
because of a bug, or for testing, or some other reason. The only way
to do that would be to rename or chmod the generator binary, which is
inconvenient and does not survive upgrades. Allow masking and
overriding generators similarly to units and other configuration
files.
For the systemd instance, masking would be more common, rather than
overriding generators. For the user instances, it may also be useful
for users to have generators in $XDG_CONFIG_HOME to augment or
override system-wide generators.
Directories are searched according to the usual scheme (/usr/lib,
/usr/local/lib, /run, /etc), and files with the same name in higher
priority directories override files with the same name in lower
priority directories. Empty files and links to /dev/null mask a given
name.
https://bugs.freedesktop.org/show_bug.cgi?id=87230
|
|
Remove the optional sepearate opening of the directory,
it would be just too complicated with the change to
multiple directories.
Move the middle of execute_directory() to a seperate
function to make it easier to grok.
|
|
Make sure to extract the log-priority when comparing against
max-log-level, otherwise, we will always drop those messages.
This fixes bus-proxyd to properly send warnings on policy blocks.
|
