| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Most servers apparently always implicitly convert DNAME to CNAME, but
some servers don't, hence implement this properly, as this is required
by edns0.
|
|
This adds dns_service_join() and dns_service_split() which may be used
to concatenate a DNS-SD service name, am SRV service type string, and a
domain name into a full resolvable DNS domain name string. If the
service name is specified as NULL, only the type and domain are
appended, to implement classic, non-DNS-SD SRV lookups.
The reverse is dns_service_split() which takes the full name, and split
it into the three components again.
|
|
|
|
tree-wide: sort includes in *.h
|
|
libsystemd-network: add support for "Client FQDN" DHCP option (v2)
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
This allows configuration of a random time on top of the elapse events,
in order to spread time events in a network evenly across a range.
|
|
|
|
|
|
The function converts a domain name string to the wire format
described in RFC 1035 Section 3.1.
|
|
Sort the includes accoding to the new coding style.
|
|
from 0ec0deaa
|
|
Remove support for RequiresOverridable= and RequisiteOverridable=
|
|
The initrd version of systemd-fsck-root.service must wait for
local-fs-pre.target just like systemd-fsck@.service to prevent
modifications to the filesystem prior to resuming from hibernation.
As-is my laptop routinely fails to resume due to fsck errors. The rest
of the time it is probably silently corrupting the filesystem.
Unlike normal boot, in the initrd systemd-fsck-root.service has no
special significance so it needs to be kept in sync with
systemd-fsck@.service. The name systemd-fsck-root.service is only used
to preserve state across switch-root.
|
|
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
|
|
Previously, the %u, %U, %s and %h specifiers would resolve to the user
name, numeric user ID, shell and home directory of the user configured
in the User= setting of a unit file, or the user of the manager instance
if no User= setting was configured. That at least was the theory. In
real-life this was not ever actually useful:
- For the systemd --user instance it made no sense to ever set User=,
since the instance runs in user context after all, and hence the
privileges to change user IDs don't even exist. The four specifiers
were actually not useful at all in this case.
- For the systemd --system instance we did not allow any resolving that
would require NSS. Hence, %s and %h were not supported, unless
User=root was set, in which case they would be hardcoded to /bin/sh
and /root, to avoid NSS. Then, %u would actually resolve to whatever
was set with User=, but %U would only resolve to the numeric UID of
that setting if the User= was specified in numeric form, or happened
to be root (in which case 0 was hardcoded as mapping). Two of the
specifiers are entirely useless in this case, one is realistically
also useless, and one is pretty pointless.
- Resolving of these settings would only happen if User= was actually
set *before* the specifiers where resolved. This behaviour was
undocumented and is really ugly, as specifiers should actually be
considered something that applies to the whole file equally,
independently of order...
With this change, %u, %U, %s and %h are drastically simplified: they now
always refer to the user that is running the service instance, and the
user configured in the unit file is irrelevant. For the system instance
of systemd this means they always resolve to "root", "0", "/bin/sh" and
"/root", thus avoiding NSS. For the user instance, to the data for the
specific user.
The new behaviour is identical to the old behaviour in all --user cases
and for all units that have no User= set (or set to "0" or "root").
|
|
[Install] data
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes #1375, #1718, #1706
|
|
Instead, let the caller do that. Fix this by moving masked unit messages
into the caller, by returning a clear error code (ESHUTDOWN) by which
this may be detected.
|
|
|
|
This directive allows passing environment variables from the system
manager to spawned services. Variables in the system manager can be set
inside a container by passing `--set-env=...` options to systemd-spawn.
Tested with an on-disk test.service unit. Tested using multiple variable
names on a single line, with an empty setting to clear the current list
of variables, with non-existing variables.
Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it
works with transient units.
Confirmed that `systemctl show` will display the PassEnvironment
settings.
Checked that man pages are generated correctly.
No regressions in `make check`.
|
|
The macro is generically useful for putting together search paths, hence
let's make it truly generic, by dropping the implicit ".d" appending it
does, and leave that to the caller. Also rename it from
CONF_DIRS_NULSTR() to CONF_PATHS_NULSTR(), since it's not strictly about
dirs that way, but any kind of file system path.
Also, mark CONF_DIR_SPLIT_USR() as internal macro by renaming it to
_CONF_PATHS_SPLIT_USR() so that the leading underscore indicates that
it's internal.
|
|
|
|
[v2] treewide: treatment of errno and other cleanups
|
|
with small manual cleanups for style.
|
|
|
|
Our functions return negative error codes.
Do not rely on errno being set after calling our own functions.
|
|
After all, this is not some compiler or C magic, but something very
specific to how systemd works, hence let's move it into def.h, and out
of macro.h
|
|
systemd-run can launch units with RuntimeDirectory
|
|
|
|
When rebooting nspawn containers about 400 times we'd otherwise hit the
fd limit and refuse further reboots.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
capability-util.[ch]
The files are named too generically, so that they might conflict with
the upstream project headers. Hence, let's add a "-util" suffix, to
clarify that this are just our utility headers and not any official
upstream headers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Also, move a couple of more path-related functions to path-util.c.
|
|
|
|
|
