| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
maximum
Messages with log levels above the current maximum log level will be dropped
inside log_meta(). But to be able to call the function, all parameters for
the function need to be provided. This can easily get expensive, if values
need to be calculated or functions are used in parameters.
Avoid all useless work by checking inside the macro, before we look
at any parameters passed to the logging functions.
|
|
When set to 0 this will stop tools like the backlight and rfkill tools to
restore state from previous boot. This is useful in case the stored state
is bogus to the extent that it is preventing you from resetting it (e.g.,
the backlight settings cause the screen to be off on boot on a system where
the backlight can not be adjusted directly from the keyboard).
|
|
This way, timedatectl can be run over the network and determine all
properties correctly from the server rather than the client.
|
|
Always use our own macros, and name all our own macros the same style.
|
|
This function should get the same treatment as other qsort uses
did in 7ff7394 "Never call qsort on potentially NULL arrays".
Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
glob_extend() would completely fail to work, or return incorrect
data if it wasn't being passed the current getopt "optarg" variable
as it used the global variable, instead of the passed parameters.
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
Emacs C indenting really gets confused by these lines if they carry no
trailing semicolon, hence let's make this nicer for good old emacs. The
other macros which define functions already do this too, so let's copy
the scheme here.
Also, let's use an uppercase name for the macro. So far our rough rule
was that macros that are totally not function-like (like this ones,
which define a function) are uppercase. (Well, admittedly it is a rough
rule only, for example function and variable decorators are all
lower-case SINCE THE CONSTANT YELLING IN THE SOURCES WOULD SUCK, and
also they at least got underscore prefixes.) Also, the macros that
define functions that we already have are all uppercase, so let's do the
same here...
|
|
|
|
|
|
src/shared/dbus-common.c:968:33: warning: Potential leak of memory pointed to by 'l'
return -EINVAL;
^~~~~~
|
|
Fixes minor leak in error path in device.c.
|
|
This extends 62678ded 'efi: never call qsort on potentially
NULL arrays' to all other places where qsort is used and it
is not obvious that the count is non-zero.
|
|
UNICODE standards only talk about fullwidth characters for East
Asian scripts. But it seems that all those symbols are fullwidth
too.
|
|
rename old versions to ascii_*
Do not take into account zerowidth characters, but do consider double-wide characters.
Import needed utf8 helper code from glib.
v3: rebase ontop of utf8 restructuring work
[zj: tweak the algorithm a bit, move new code to separate file]
|
|
|
|
For the library functions we expose we currently repeatedly use checks
like the following:
if (!value_is_ok(parameter1))
return -EINVAL;
if (!value_is_ok(parameter2))
return -EINVAL;
And so on. Let's turn this into a macro:
assert_return(value_is_ok(parameter1), -EINVAL);
assert_return(value_is_ok(paramater2), -EINVAL);
This makes our code a bit shorter and simpler, and also allows us to add
a _unlikely_() around the check.
|
|
In order to improve energy consumption we should minimize our wake-ups
when handling timers. Hence, for each timer take an accuracy value and
schedule the actual wake-up time somewhere between the specified time
and the specified timer plus the accuracy.
The specified time of timer event sources hence becomes the time the
handler is called the *earliest*, and the specified time plus the accuracy
the time by which it is called the *latest*, leaving the library the
freedom to schedule the wake-up somewhere inbetween.
If the accuracy is specified as 0 the default of 250ms will be used.
When scheduling timeouts we will now try to elapse them at the same
point within each second, across the entire system. We do this by using
a fixed perturbation value keyed off the boot id. If this point within a
second is not in the acceptable range, we try again with a fixed time
within each 250ms time step. If that doesn't work either, we wake up at
the last possible time.
|
|
|
|
Always cache the results, and bypass low-level security calls when the
respective subsystem is not enabled.
|
|
So far we tried to use epoll directly wherever we needed an event loop.
However, that has various shortcomings, such as the inability to handle
larger amounts of timers (since each timerfd costs one fd, which is a
very limited resource, usually bounded to 1024), and inability to do
priorisation between multiple queued events.
Let's add a minimal event loop API around epoll that is suitable for
implementation of our own daemons and maybe one day can become public
API for those who desire it.
This loop is part of libsystemd-bus, but may be used independently of
it.
|
|
00000000 46 42 50 54 38 00 00 00 02 00 30 02 00 00 00 00 |FBPT8.....0.....|
00000010 23 45 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |#E..............|
00000020 f5 6a 51 00 00 00 00 00 00 00 00 00 00 00 00 00 |.jQ.............|
00000030 00 00 00 00 00 00 00 00 70 74 61 6c 58 00 00 00 |........ptalX...|
|
|
Since on most systems with xattr systemd will compile with Smack
support enabled, we still attempt to mount various fs's with
Smack-only options.
Before mounting any of these Smack-related filesystems with
Smack specific mount options, check if Smack is functionally
active on the running kernel.
If Smack is really enabled in the kernel, all these Smack mounts
are now *fatal*, as they should be.
We no longer mount smackfs if systemd was compiled without
Smack support. This makes it easier to make smackfs mount
failures a critical error when Smack is enabled.
We no longer mount these filesystems with their Smack specific
options inside containers. There these filesystems will be
mounted with there non-mount smack options for now.
|
|
|
|
Triggered false negatives when encoding a string which needed every
character to be escaped, e.g. "LABEL=/".
|
|
|
|
|
|
We were already creating the file if it was missing, and this way
containers can reconfigure the file without running into problems.
This also makes resolv.conf handling more alike to handling of
/etc/localtime, which is also not a bind mount.
|
|
|
|
|
|
|
|
|
|
|
|
This allows us to get rid of the dep on libsystemd-label for cgroup
management.
https://bugs.freedesktop.org/show_bug.cgi?id=69966
|
|
|
|
Let read()/write() report any error/EOF.
|
|
Instead of fixing the hashmap bucket array to 127 entries dynamically
size it, starting with a smaller one of 31. As soon as a fill level of
75% is reached, quadruple the size, and so on.
This should siginficantly optimize the lookup time in large tables
(from O(n) back to O(1)), and save memory on smaller tables (which most
are).
|
|
Also, we need to use proper strv_env_xyz() calls when putting together
the environment array, since otherwise settings won't be properly
overriden.
And let's get rid of strv_appendf(), is overkill and there was only one
user.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=69887
Based-on-a-patch-by: Hans Petter Jansson <hpj@copyleft.no>
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
root dir
|
|
Also add PATH_FOREACH_PREFIX_MORE which includes the specified dir
itself in the iteration
|
|
|
|
Syntactic sugar in a macro PATH_FOREACH_PREFIX.
|
|
controllers
Previously we did operations like attach, trim or migrate only on the
controllers that were enabled for a specific unit. With this changes we
will now do them for all supproted controllers, and fall back to all
possible prefix paths if the specified paths do not exist.
This fixes issues if a controller is being disabled for a unit where it
was previously enabled, and makes sure that all processes stay as "far
down" the tree as groups exist.
|
|
Prefer firmware-provided performance data over loader-exported ones; if
ACPI data is available, always use it, otherwise try to read the loader
data.
The firmware-provided variables start at the time the first EFI image
is executed and end when the operating system exits the boot services;
the (loader) time calculated in systemd-analyze increases.
|
|
|
