| Age | Commit message (Collapse) | Author |
|---|
|
|
|
QEMU/KVM guests do not have hypervisor nodes, but they do have
fw-cfg nodes (since qemu v2.3.0-rc0). fw-cfg nodes are documented,
see kernel doc Documentation/devicetree/bindings/arm/fw-cfg.txt,
and therefore we should be able to rely on it in this detection.
Unfortunately, we currently don't have enough information in the
DT, or elsewhere, to determine if we're using KVM acceleration
with QEMU or not, so we can only report 'qemu' at this time, even
if KVM is in use. This shouldn't really matter in practice though,
because if detect-virt is used interactively it will be clear to
the user whether or not KVM acceleration is present by the overall
speed of the guest. If used by a script, then the script's behavior
should not change whether it's 'qemu' or 'kvm'. QEMU emulated
guests and QEMU/KVM guests of the same type should behave
identically, only the speed at which they run should differ.
|
|
|
|
Kernel doc Documentation/ABI/testing/sysfs-firmware-ofw says that
the /proc/device-tree symlink should be used, as opposed to
directly accessing /sys/firmware/devicetree/base. The former is
ABI, but not the later.
|
|
like:
src/shared/install.c: In function ‘unit_file_lookup_state’:
src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in
this function [-Wmaybe-uninitialized]
return r < 0 ? r : state;
^
src/shared/install.c:1796:13: note: ‘r’ was declared here
int r;
^
|
|
When parsing words from input files, optionally automatically unescape
the passed strings, controllable via a new flags parameter.
Make use of this in tmpfiles, and port everything else over, too.
This improves parsing quite a bit, since we no longer have to process the
same string multiple times with different calls, where an earlier call
might corrupt the input for a later call.
|
|
And other non-device entries (like fstab does).
Mount whatever the user asked to be mounted on / on the kernel
command line. Do less sanity check and do *not* bail out
when the mount device looks strange or does not exist.
This basically makes the changes for deviceless filesystems
from yesterday unnecessary and is in line with what we do for
filesystems set up in fstab.
Remove some code that is now dead (reverting fb02a2775a65 and
b0438462).
[tomegun:
- change patch title/description a bit.
- don't touch the /usr logic, that would be a separate change and
we don't currently have a convincing use-case for that.
- don't bail out on /sys ro. This only makes sense in containers,
where we would not be doing this anyway. If there is a use-case
we could consider that as a separate patch.]
|
|
We planned to support (the conceptually broken) daylight saving
time/local time features in the kernel, SCSI, networking, FAT
filesystem, but it turned out to be a race we cannot win and do
not want to get involved. Systemd should not fiddle with daylight
saving time or parse timezone information itself.
Leave everything to glibc or tools like date(1) and do not make any
promises or raise expectations that systemd should handle anything
like this.
|
|
There is no need to check those.
|
|
This allows for stateless systems.
|
|
|
|
All callers look at the return value anyway.
|
|
Add change_attr_fd() function to modify the file/directory attribute.
|
|
We always return NULL/invalid-object from destructors, fix strv_free() to
do the same.
|
|
... and make path_equal() a simple wrapper around it.
|
|
This will be used by fsckd. This reverts part of
031886edfc6e96ab778c241035a8d00fb0de99d3.
|
|
Even if plymouth is running, it might have not displayed the splash yet,
so we'll see a few lines on fbcon when we should have otherwise had
nothing.
Plymouth integration was added to systemd in commit
6faa11140bf776cdaeb8d22d01816e6e48296971. That same day, Plymouth got
systemd integration [0]. As such, the Plymouth integration has always
been obsolete, and was probably only for older Plymouth's. But I can't
imagine anybody running a Plymouth from 2011 with a systemd from 2015.
Remove the Plymouth/systemd integration, and let Plymouth's code tell
systemd to print the details.
[0] http://cgit.freedesktop.org/plymouth/commit/?id=537c16422cd49f1beeaab1ad39846a00018faec1
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Cc: Daniel Drake <dsd@endlessm.com>
Cc: Ray Strode <rstrode@redhat.com>
|
|
CID #1237546.
|
|
With debugging on, sysv-generator would print the full set of
lookup paths for *every* sysv script.
While at it, pass LookupPaths as a pointer in sysv-generator,
and constify it everywhere.
|
|
mar 14 20:05:34 fedora22 systemd[4058]: /usr/lib/systemd/system-generators/kdump-dep-generator.sh will be executed.
mar 14 20:05:34 fedora22 systemd[4058]: Spawned /usr/lib/systemd/system-generators/kdump-dep-generator.sh as 4059.
The second line already says everything.
|
|
If you've got SELinux policy loaded, label_hnd is your labeling handle.
When systemd is shutting down, we free that handle via mac_selinux_finish().
But: switch_root() calls mkdir_p_label(), which tries to look up a label
using that freed handle, and so we get a bunch of garbage and eventually
SEGV in libselinux.
(This doesn't happen in the switch-root from initramfs to real root because
there's no SELinux policy loaded in initramfs, so label_hnd is NULL and we
never attempt any lookups.)
So: make sure that mac_selinux_finish() actually sets label_hnd to NULL, so
nobody tries to use it after it becomes invalid.
https://bugzilla.redhat.com/show_bug.cgi?id=1185604
|
|
We were using a space more often than not, and this way is
codified in CODING_STYLE.
|
|
It certainly is everywhere on Linux, but as a courtesy
to people doing some strange cross-compilation, check
that the assumption holds.
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
|
|
|
|
renameat2() exists since Linux 3.15 but btrfs support for the flag
RENAME_NOREPLACE was added later.
This patch implements a fallback when renameat2() returns EINVAL.
EINVAL is the error returned when the filesystem does not support one of
the flags.
|
|
path_is_mount_point() compares the mount_id of a directory and the
mount_id of the parent directory. When following symlinks, the function
to get the parent directory does not take the symlink into account.
/bin -> /usr/bin with /usr being a mountpoint:
mount_id of /bin with AT_SYMLINK_FOLLOW != mount_id of /
|
|
|
|
|
|
|
|
just a typo fix
|
|
Usually when using loop_read(), we want to read the full buffer.
Add a helper that mirrors loop_write(), and returns 0 when full buffer
was read, and an error otherwise.
Use -ENODATA for the short read, to distinguish it from a read error.
|
|
Introduced a few commits ago.
|
|
audit.h uses uint32_t and bool.
log.h uses abs.
|
|
|
|
Also rename r to buf, since r is customarily reserved for the return value.
|
|
I'm pretty sure that this is what was meant here.
|
|
|
|
Fix return value if unlink fails.
|
|
Also, expose it in machinectl.
|
|
|
|
This is necessary to build with older kernel headers. NDA_VLAN was
introduced in v3.9 and NDA_PORT, NDA_VNI and NDA_IFINDEX in v3.10
|
|
CID #128739.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=89421
|
|
This also adds "machinectl import-raw" and "machinectl import-tar" to
wrap these new bus calls.
THe commands basically do for local files that "machinectl pull-raw" and
friends do for remote files.
|
|
On s390 (at least) /sys/class/power_supply is not present. We should
treat this like if this directory was empty, and not an error.
|
|
downloads
If /var/lib/machines is mounted as btrfs loopback file system in
/var/lib/machines.raw with this change we automatically grow the file
system as it fills up. After each 10M we write to it during imports, we
check the free disk space, and if the fill level grows beyond 66% we
increase the size of the file system to 3x the fill level (thus lowering
it to 33%).
|
|
is called
|
|
This way, we can safely set up the directories from two processes at the
same time, including machined and importd simultaneously.
|
