| Age | Commit message (Collapse) | Author |
|---|
|
Partially revert 2b3c81b02fa5dd47b19558c7684e113f36a48486, which
tried to avoid inconsistent rules about when and how to create the
/dev/rtc symlink.
Instead of conditionally or not creating the /dev/rtc link at all,
now always create it with additional and more reliable udev rules.
First try to find the "system rtc" with the hctosys flag, if this
is not found, fall back to create the link for /dev/rtc0.
Our code now never actively searches for the "system rtc" it can
always use /dev/rtc.
|
|
This adds some syntactic sugar with a macro RUN_WITH_LOCALE() that reset
the thread-specific locale temporarily.
|
|
Disallow recursive .include, and make it unavailable in anything but
unit files.
|
|
Let's better be safe than sorry.
|
|
parse_env_file_internal()
|
|
The export of the RTCs hctosys flag is uneccesary, the kernel takes care
of the persistemt clock management itself, without any need for:
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
"Chaotic hardware platforms" without native kernel persistent clock
support will find the proper RTC with the logic rtc_open() without
the need for a custom symlink.
|
|
Freeing in error path is the common pattern with set_put().
|
|
Session objects will now get the .session suffix, user objects the .user
suffix, nspawn containers the .nspawn suffix.
This also changes the user cgroups to be named after the numeric UID
rather than the username, since this allows us the parse these paths
standalone without requiring access to the cgroup file system.
This also changes the mapping of instanced units to cgroups. Instead of
mapping foo@bar.service to the cgroup path /user/foo@.service/bar we
will now map it to /user/foo@.service/foo@bar.service, in order to
ensure that all our objects are properly suffixed in the tree.
|
|
As discussed with Dan Berrange it's a good idea to suffix all objects in
the cgroup tree with ".something", so that when the system is
partitioned using a resource management tool we can drop objects of
different types into the same partition directory without generate
namespace conflicts.
We'l add this to the Pax Control Group document as soon as write access
to the fdo wiki is restored.
|
|
|
|
This reverts commit 4826f0b7b5c0aefa08b8cc7ef64d69027f84da2c.
Because statfs.t_type can be int on some architecures, we have to cast
the const magic to the type, otherwise the compiler warns about
signed/unsigned comparison, because the magic can be 32 bit unsigned.
statfs(2) man page is also wrong on some systems, because
f_type is not __SWORD_TYPE on some architecures.
The following program:
int main(int argc, char**argv)
{
struct statfs s;
statfs(argv[1], &s);
printf("sizeof(f_type) = %d\n", sizeof(s.f_type));
printf("sizeof(__SWORD_TYPE) = %d\n", sizeof(__SWORD_TYPE));
printf("sizeof(long) = %d\n", sizeof(long));
printf("sizeof(int) = %d\n", sizeof(int));
if (sizeof(s.f_type) == sizeof(int)) {
printf("f_type = 0x%x\n", s.f_type);
} else {
printf("f_type = 0x%lx\n", s.f_type);
}
return 0;
}
executed on s390x gives for a btrfs:
sizeof(f_type) = 4
sizeof(__SWORD_TYPE) = 8
sizeof(long) = 8
sizeof(int) = 4
f_type = 0x9123683e
|
|
This reverts commit a858b64dddf79177e12ed30f5e8c47a1471c8bfe.
This reverts commit aea275c43194b6ac519ef907b62c5c995050fde0.
This reverts commit fc6e6d245ee3989c222a2a8cc82a33475f9922f3.
This reverts commit c4073a27c555aeceac87a3b02a83141cde641a1e.
This reverts commit cddf148028f525be8176e7f1cbbf4f862bd287f6.
This reverts commit 8c68a70170b31f93c287f29fd06c6c17edaf19ad.
The constants are now casted to __SWORD_TYPE, which should resolve the
compiler warnings about signed vs unsigned.
After talking to Kay, we concluded:
This should be fixed in the kernel, not worked around in userspace tools.
Architectures cannot use int and expect magic constants lager than INT_MAX
to work correctly. The kernel header needs to be fixed.
Even coreutils cannot handle it:
#define RAMFS_MAGIC 0x858458f6
# stat -f -c%t /
ffffffff858458f6
#define BTRFS_SUPER_MAGIC 0x9123683E
# stat -f -c%t /mnt
ffffffff9123683e
Although I found the perfect working macro to fix the thing :)
__extension__ ({ \
bool _ret = false; \
switch(f) { case c: _ret=true; }; \
( _ret ); \
})
|
|
const
If the magic parameter is not a const, then the macro does not work, so
better fail to compile, than be surprised afterwards.
|
|
systemd does not want to understand comments after the first
non-whitespace char occured.
key=foo #comment will result into key == "foo #comment"
key="foo" #comment will result into key == "foo#comment"
"key= #comment" will result into key == "#comment"
"key #comment" is an invalid line
|
|
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
|
|
|
|
On some architectures (like s390x) the kernel has the type int for
f_type, but long in userspace.
Assigning the 32 bit magic constants from linux/magic.h to the 31 bit
signed f_type in the kernel, causes f_type to be negative for some
constants.
glibc extends the int to long for those architecures in 64 bit mode, so
the negative int becomes a negative long, which cannot be simply
compared to the original magic constant, because the compiler would
automatically cast the constant to long.
To workaround this issue, we also compare to the (int)MAGIC value in a
macro. Of course, we could do #ifdef with the architecure, but it has to
be maintained, and the magic constants are 32 bit anyway.
Someday, when the int is unsigned or long for all architectures, we can
remove this macro again. Until then, keep it as simple as it can be.
|
|
bus_error and bus_error_message_or_strerror dit almost exactly the same,
so use only one of them and place it in dbus-common.
|
|
Instead of making a type up, just use __SWORD_TYPE, after reading
statfs(2).
Too bad, this does not fix s390x because __SWORD_TYPE is (long int) and
the kernel uses (int) to fill in the field!!!!!!
|
|
|
|
statfs.f_type is signed but the filesystem magics are unsigned.
Casting the magics to signed will not make the signed.
Problem seen on big-endian 64bit s390x with __fsword_t 8 bytes.
Casting statfs.f_type to unsigned on the other hand will get us what we
need.
https://bugzilla.redhat.com/show_bug.cgi?id=953217
|
|
Because "export key=val" is not supported by systemd, an error is logged
where the invalid assignment is coming from.
Introduce strv_env_clean_log() to log invalid environment assignments,
where logging is possible and allowed.
parse_env_file_internal() is modified to allow WHITESPACE in keys, to
report the issues later on.
|
|
parse_env_file_internal() could not parse the following lines correctly:
export key="val"
key="val"#comment
|
|
These are also considered special by sh and bash.
|
|
They are irrelevant and misleading.
E.g. systemd-analyze:
Startup finished in 6d 4h 15min 32.330s (kernel) + 49ms 914us (userspace) = 6d 4h 15min 32.380s
becomes
Startup finished in 53.735ms (userspace) = 53.735ms
which looks much better :)
|
|
|
|
The information about the unit for which files are being parsed
is passed all the way down. This way messages land in the journal
with proper UNIT=... or USER_UNIT=... attribution.
'systemctl status' and 'journalctl -u' not displaying those messages
has been a source of confusion for users, since the journal entry for
a misspelt setting was often logged quite a bit earlier than the
failure to start a unit.
Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
Those functions were identical, apart from typos. Log message
is modified to contain the type of destination var (int, double,
...). I think this might make it easier to understand why a value
was rejected (e.g. a minus from an unsigned type).
|
|
|
|
This also makes sure we always detect an OS tree the same way, by
checking for /etc/os-release.
|
|
There's now a generic _cleanup_ macro with an argument. The macros for
specific types are now defined using this macro, and in the header files
where they belong.
All cleanup handlers are now inline functions.
|
|
DECIMAL_STR_WIDTH() now works on any numeric type, and is easier to
distingish from DECIMAL_STR_MAX().
This also replaces another manual implementaiton of ulog10 by this macro.
|
|
containers there
Containers will now carry a label (normally derived from the root
directory name, but configurable by the user), and the container's root
cgroup is /machine/<label>. This label is called "machine name", and can
cover both containers and VMs (as soon as libvirt also makes use of
/machine/).
libsystemd-login can be used to query the machine name from a process.
This patch also includes numerous clean-ups for the cgroup code.
|
|
|
|
this anymore to skip audit session ID retrieval
As audit is still broken in containers we need a reliable way how we can
determine whether the audit data we read from 7proc is actually useful.
Previously we used CAP_AUDIT_CONTROL for this, since nspawn removed that
from the nspawn container. This has changed a while back however, which
means we used audit data of host system in the container.
This adds an explicit container check to the audit calls, so that all
audit data is turned off in containers.
This should fix session creation with pam_systemd/logind in nspawn containers.
|
|
This allows clients to put inotify watches on these trees to watch for
state changes, without having to wait until these dirs are created.
This introduces the new top-level /machine cgroup dir as canonical
location where OS containers and VMs shall be located (as discussed with
the libvirt folks).
|
|
If systemd-vconsole-setup was started with LANG=C (no locale.conf), then
it would set the console to non-unicode, which is not what we want.
|
|
|
|
Make sure that our library is safe for usage in SUID programs when it
comes to env var handling
|
|
"__attribute__((always_inline))" does not replace "inline" and they
still need to be used together. This fixes "always_inline function
might not be inlinable [-Wattributes]" warning in gcc 4.7
Idea-from-patch-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=63477
|
|
Just {} is used in a lot of places now, and there's nothing
special abose those few.
|
|
|
|
|
|
|
|
Make sure we compare errno against positive error codes.
The ones in hwclock.c and install.c can have an impact, the
rest are unlikely to be hit or in code that isn't widely
used.
Also check that errno > 0, to help gcc know that we are
returning a negative error code.
|
|
If we pass a constant value to ALIGN() gcc should have the chance to
calculate the value during compilation rather than runtime, so let's
avoid a static inline call if we can.
|
|
I was debugging systemd waiting on a missing disk, and noticed
that the job listing could use some polishing. Jobs that are
actually running are highlighted, so it's easier to see what
very actually waiting for.
Also, the needed widths are precalculated, to use available columns
more ecomically.
|
