summaryrefslogtreecommitdiff
path: root/src/shared
AgeCommit message (Collapse)Author
2013-08-20Rename F_TYPE_CMP() to F_TYPE_EQUAL()Zbigniew Jędrzejewski-Szmek
2013-08-16build-sys: Add configure check for linux/btrfs.hMichael Marineau
btrfs.h was added to uapi in Linux 3.9. To fix building with older header versions this adds a configure check for the header and re-adds btrfs definitions to missing.h which was removed in bed2e820 along with two other ioctls used by gpt-auto-generator. [ Apparently, btrfs.h was only added recently: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=55e301fd57a6239ec14b91a1cf2e70b3dd135194 let's re-add it for now -- kay ]
2013-08-15hashmap: remove empty linesKay Sievers
2013-08-13missing: use btrfs.h instead of defining our own btrfs structuresLennart Poettering
2013-08-11logs-show: limit to 3 lines and use dots if not showing full messageZbigniew Jędrzejewski-Szmek
So far, we would show up to 128 bytes from a message, simply cutting of the rest. With multiline messages, it is quite common for a message to be longer than that, and this model doesn't really work anymore. A new limit is added: up to 3 lines will be shown, unless --full is used (c.f. first line below). The limit for bytes is extended to 300 bytes. An ellipsis will always be used, if some form of truncation occurs. If the tail of the message is cut off, either because of length or line limit, dots will be shown at the end of the last line. If this last line is short, the dots will be simply appended. If the last line is too long for that, it will be ellipsized with dots at the very end. Note that the limits are in bytes, not characters, and we suck at outputting unicode strings (c.f. last three lines below). Aug 11 10:46:21 fedora python[67]: test message line line... Aug 11 10:50:47 fedora python[76]: test message word word word word word word word word word word word wor... Aug 11 10:55:11 fedora python[83]: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx... Aug 11 11:03:21 fedora python[90]: ąąąąąąąąąąąąąąąąąąąąąąąąąąąąąą... Aug 11 11:03:53 fedora python[97]: aąąąąąąąąąąąąąąąąąąąąąąąąąąąąąą... Aug 11 11:25:45 fedora python[121]: aąąąąąąąąąąąąąąąąąąąąąąąąąąąąąąąąąą�...
2013-08-11logs-show: fix indentation for 2nd and later lines, show lines in fullZbigniew Jędrzejewski-Szmek
Now --full will show long fields in full, like it already did with --all.
2013-08-11systemctl: show hint about --full when lines don't fitZbigniew Jędrzejewski-Szmek
2013-08-04systemd-delta: Only print colors when on a ttyDaniel Schaal
This make systemd-delta follow the behaviour of systemctl and journalctl. https://bugs.freedesktop.org/show_bug.cgi?id=67656 [zj: unify color query methods between those three programs.]
2013-07-26rework systemd's own process environment handling/passingKay Sievers
Stop importing non-sensical kernel-exported variables. All parameters in the kernel command line are exported to the initial environment of PID1, but suppressed if they are recognized by kernel built-in code. The EFI booted kernel will add further kernel-internal things which do not belong into userspace. The passed original environ data of the process is not touched and preserved across re-execution, to allow external reading of /proc/self/environ for process properties like container*=.
2013-07-26journalctl: use _COMM= match for scriptsZbigniew Jędrzejewski-Szmek
In case of scripts, _EXE is set to the interpreter name, and _COMM is set based on the file name. Add a match for _COMM, and _EXE if the interpreter is not a link (e.g. for yum, the interpreter is /usr/bin/python, but it is a link to /usr/bin/python2, which in turn is a link to /usr/bin/python2.7, at least on Fedora, so we end up with _EXE=/usr/bin/python2.7). I don't think that such link chasing makes sense, because the final _EXE name is more likely to change.
2013-07-26shared: split mkdir_*() and mkdir_*_label() from each otherKay Sievers
Avoid pulling-in selinux for tools which just create directories but not need to fix the selinux label.
2013-07-24core: synchronously block when loggingLennart Poettering
Previously, the logging sockets were asynchronous and if clogged we'd lose messages. We did this to be extra careful given that PID 1 might need to spawn the logging daemon as response to PID 1's own log messages and we really should avoid a deadlock in that case. As it turns out this causes loss of too many messages, hence make the socket blocking again, however put a time limit on it to avoid unbounded deadlocks in the unlikely case they happen. https://bugs.freedesktop.org/show_bug.cgi?id=66664
2013-07-20shared: fix build on !x86Shawn Landden
2013-07-19core: add %v specifierZbigniew Jędrzejewski-Szmek
2013-07-18util: add split_pair() for splitting foo=bar stringsLennart Poettering
2013-07-18journalctl: add ”short-iso” output format with verbose ISO8601 timestampsTomasz Torcz
Example: 2013-07-18T10:10:01+0200 sandworm CROND[20957]: (root) CMD (/usr/lib64/sa/sa1 1 1)
2013-07-16journalctl,systemctl: fix tiny memleakZbigniew Jędrzejewski-Szmek
2013-07-17util: make gcc shut up by passing a 0 mode param to open()Lennart Poettering
If we pass a variable to open()'s flags parameter it really wants a mode parameter too, otherwise some gcc version whine. Hence, pass 0 in that case.
2013-07-17util: make some gcc versions shut up regarding unintialized variable accessLennart Poettering
2013-07-16util.c:is_locale_utf8(): check, if "C" was set on purposeHarald Hoyer
If you have a ASCII only terminal, there is no way to set the charmap to ANSI_X3.4-1968, other than using LC_CTYPE=C. We don't want to assume a UTF-8 capable terminal in this case and only do so, if LANG, LC_ALL and LC_CTYPE are unset.
2013-07-16test-tables: allow sparse tables and check mapping for -1Zbigniew Jędrzejewski-Szmek
Jan: test-tables fails on my system. The one it's failing on is: syscall: 222 → (null) → -1 ... and indeed, our own tables should not have holes, but syscall tables certainly might.
2013-07-16detect-virt: detect User-Mode LinuxRamkumar Ramachandra
In a User-Mode Linux session: $ systemd-detect-virt none Although it is possible to reliably detect virtualization: $ cat /proc/cpuinfo processor : 0 vendor_id : User Mode Linux model name : UML mode : skas host : Linux kytes 3.11.0-rc1-00009-ge5fd680 (...) bogomips : 7007.43 So, grep for the string "\nvendor_id\t: User Mode Linux\n" in /proc/cpuinfo, and say "uml" when asked.
2013-07-16journal: add logging of effective capabilities _CAP_EFFECTIVEShawn Landden
I think this is the most important of the capabilities bitmasks to log.
2013-07-16util: recognize 'ncp' as an alias to 'ncpfs'Frederic Crozat
ncp is also used for Netware mount point, recognize it as such. Fixes https://bugzilla.novell.com/show_bug.cgi?id=828905.
2013-07-14systemd: fix NULL dereference when disabling a nonexistent instanceZbigniew Jędrzejewski-Szmek
Assertion 'p' failed at src/shared/path-util.c:51, function path_get_file_name(). Aborting. The unit file could not be found, and i->path would not be set. In 02b9e969 a code path was added which attempts to remove symlinks to a nonexistent (removed) unit file. This worked OK in case of non-instance services, but broke in the case of instance services. Behaviour wrt. to instance units is changed in the way that 02b9e969 changed it for non-instance units: it is now possible to remove instance symlinks to a template unit that has been removed. This patch isn't a full fix, because the behaviour wrt. to enabling and disabling instance units is still broken: e.g it is possible to start autovt@tty5.service, but it is not possible to enable it, because autovt@.service is a symlink, and on the other hand, disabling getty@tty5.service removes all symlinks to getty@.service, which is wrong too. But segfaults make bad pr, so let's add at least this partial fix for now.
2013-07-13test: add trivial test for syscall table and extend table tests to error pathsZbigniew Jędrzejewski-Szmek
2013-07-13install: make "reenable" work with templated unitsRoss Lagerwall
Before, "systemctl reenable getty@tty1.service" would fail with: Failed to issue method call: File exists To fix this, reimplement "reenable" explicitly as a disable followed by an enable. This is shorter and is how the man page documents its behavior.
2013-07-12shared/install: fix trivial memleakZbigniew Jędrzejewski-Szmek
We lost the reference when setting path second time.
2013-07-11cgroup: simplify how instantiated units are mapped to cgroupsLennart Poettering
Previously for an instantiated unit foo@bar.service we created a cgroup foo@.service/foo@bar.service, in order to place all instances of the same template inside the same subtree. As we now implicitly add all instantiated units into one per-template slice we don't need this complexity anymore, and instance units can map directly to the cgroups of their full name.
2013-07-11basic SO_REUSEPORT supportShawn Landden
2013-07-10cgroup: when uninstalling agent, actually turn it off firstLennart Poettering
2013-07-10systemctl: suppress error message when doing "systemctl daemon-reexec"Lennart Poettering
When we issue a reexecution request via the private socket we need to expect a "Disconnected" in addition to "NoReply" when the connection is terminated.
2013-07-10core: serialize/deserialize bus subscribersLennart Poettering
2013-07-05tests: add tests for string lookup tablesZbigniew Jędrzejewski-Szmek
The tests check if the tables have entries for all values in the enum, and that the entries are unique.
2013-07-04disable the cgroups release agent when shutting downKay Sievers
During shutdown, when we try to clean up all remaining processes, the kernel will fork new agents every time a cgroup runs empty. These new processes cause delays in the final SIGTERM, SIGKILL logic. Apart from that, this should also avoid that the kernel-forked binaries cause unpredictably timed access to the filesystem which we might need to unmount.
2013-07-02replace tabs with spaces in various filesJason St. John
The affected files in this patch had inconsistent use of tabs vs. spaces for indentation, and this patch eliminates the stray tabs. Also, the opening brace of sigchld_hdl() in activate.c was moved so the opening braces are consistent throughout the file.
2013-07-02journald: drop (deleted) from _EXE= fieldsZbigniew Jędrzejewski-Szmek
The kernel adds those when the file is deleted, but we don't really care if the file is still there or not. The downside is that if the filename ends in ' (deleted)', this part of the filename will be removed. Too bad.
2013-07-02man: improve grammar and word formatting in numerous man pagesJason St. John
Use proper grammar, word usage, adjective hyphenation, commas, capitalization, spelling, etc. To improve readability, some run-on sentences or sentence fragments were revised. [zj: remove the space from 'file name', 'host name', and 'time zone'.]
2013-07-02libsystemd-logind: fix detection of session/user/machine of a PIDLennart Poettering
2013-07-02logind: port over to use scopes+slices for all cgroup stuffLennart Poettering
In order to prepare things for the single-writer cgroup scheme, let's make logind use systemd's own primitives for cgroup management. Every login user now gets his own private slice unit, in which his sessions live in a scope unit each. Also, add user@$UID.service to the same slice, and implicitly start it on first login.
2013-07-02core: split out unit bus path unescaping into unit_name_from_dbus_path()Lennart Poettering
2013-07-01core: add new "scope" unit type for making a unit of pre-existing processesLennart Poettering
"Scope" units are very much like service units, however with the difference that they are created from pre-existing processes, rather than processes that systemd itself forks off. This means they are generated programmatically via the bus API as transient units rather than from static configuration read from disk. Also, they do not provide execution-time parameters, as at the time systemd adds the processes to the scope unit they already exist and the parameters cannot be applied anymore. The primary benefit of this new unit type is to create arbitrary cgroups for worker-processes forked off an existing service. This commit also adds a a new mode to "systemd-run" to run the specified processes in a scope rather then a transient service.
2013-06-28core: add transient unitsLennart Poettering
Transient units can be created via the bus API. They are configured via the method call parameters rather than on-disk files. They are subject to normal GC. Transient units currently may only be created for services (however, we will extend this), and currently only ExecStart= and the cgroup parameters can be configured (also to be extended). Transient units require a unique name, that previously had no configuration file on disk. A tool systemd-run is added that makes use of this functionality to run arbitrary command lines as transient services: $ systemd-run /bin/ping www.heise.de Will cause systemd to create a new transient service and run ping in it.
2013-06-27test: Add list testcaseJan Janssen
2013-06-27core: general cgroup reworkLennart Poettering
Replace the very generic cgroup hookup with a much simpler one. With this change only the high-level cgroup settings remain, the ability to set arbitrary cgroup attributes is removed, so is support for adding units to arbitrary cgroup controllers or setting arbitrary paths for them (especially paths that are different for the various controllers). This also introduces a new -.slice root slice, that is the parent of system.slice and friends. This enables easy admin configuration of root-level cgrouo properties. This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in /dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is turned off by DevicePolicy=).
2013-06-26journalctl: highlight MESSAGE= in verbose outputZbigniew Jędrzejewski-Szmek
When looking at verbose output, additional "work" is required to pick out the interesting MESSAGE= lines from all the fields. Also, show long fields in full in verbose output mode when OUTPUT_FULL_WIDTH is specified.
2013-06-20journalctl,systemctl: show messages tagged with OBJECT_SYSTEMD_[USER_]_UNITZbigniew Jędrzejewski-Szmek
Replace mallocs with alloca while at it.
2013-06-20Make sure we only show authentic coredump messagesZbigniew Jędrzejewski-Szmek
Before we only checked the MESSAGE_ID and COREDUMP_UNIT. Those are both user-controlled fields. For COREDUMP_USER_UNIT, relax the rules a bit, and also allow messages from _UID=0.
2013-06-20Add hasprefix macro to check prefixes of fixed lengthZbigniew Jędrzejewski-Szmek
2013-06-21login: add an api to determine the slice a PID is located in to libsystemd-loginLennart Poettering