| Age | Commit message (Collapse) | Author |
|---|
|
Let's place only one ternary operator.
|
|
Let's only check for eof once after the fgets(). There's no point in checking
EOF before the first read, and twice in each loop.
|
|
|
|
This way, we can get rid of a label/goto.
|
|
Let's make missing write access to /proc/sys non-fatal to the sysctl service.
This is a follow-up to 411e869f497c7c7bd0688f1e3500f9043bc56e48 which altered
the condition for running the sysctl service to check for /proc/sys/net being
writable, accepting that /proc/sys might be read-only. In order to ensure the
boot-up stays clean in containers lower the log level for the EROFS errors
generated due to this.
|
|
configuration files (#4205)
Currently, systemd-sysctl command configures kernel parameters in each sysctl
configuration files in random order due to characteristics of iterator of
Hashmap.
However, kernel parameters need to be configured in the order they occur in
each sysctl configuration files.
- For example, consider fs.suid_coredump and kernel.core_pattern. If
fs.suid_coredump=2 is configured before kernel.core_pattern= whose default
value is "core", then kernel outputs the following message:
Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
Note that the security issue mentioned in this message has already been fixed
on recent kernels, so this is just a warning message on such kernels. But
it's still confusing to users that this message is output on some boot and
not output on another boot.
- I don't know but there could be other kernel parameters that are significant
in the order they are configured.
- The legacy sysctl command configures kernel parameters in the order they
occur in each sysctl configuration files. Although I didn't find any official
specification explaining this behavior of sysctl command, I don't think there
is any meaningful reason to change this behavior, in particular, to the
random one.
This commit does the change by simply using OrderedHashmap instead of Hashmap.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
The macro is generically useful for putting together search paths, hence
let's make it truly generic, by dropping the implicit ".d" appending it
does, and leave that to the caller. Also rename it from
CONF_DIRS_NULSTR() to CONF_PATHS_NULSTR(), since it's not strictly about
dirs that way, but any kind of file system path.
Also, mark CONF_DIR_SPLIT_USR() as internal macro by renaming it to
_CONF_PATHS_SPLIT_USR() so that the leading underscore indicates that
it's internal.
|
|
with small manual cleanups for style.
|
|
After all, this is not some compiler or C magic, but something very
specific to how systemd works, hence let's move it into def.h, and out
of macro.h
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
Let's make this less dramatic, in order to not confuse people too much
making them think that this was something to actually fix.
|
|
|
|
We shouldn't fail the sysctl service if an option is missing.
Previously the warning about this was already downgraded to LOG_DEBUG,
but we really shouldn't propagate such errors either.
|
|
|
|
|
|
Printing it at info level was tedious. We don't do that for any other
overrides.
|
|
not while applying the parsed sysctl values. Otherwise
info "Overwriting earlier assignment of %s in file %s" is
visible many times even though the given --prefix doesn't
try to set the overridden value.
This also optimizes the startup tiny bit since we have udev
rules running on network devices and setting sysctl through
the rules.
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
The one in tmpfiles.c:create_item() even looks like it fixes a bug.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
Several different systemd tools define a nulstr containing a standard
series of configuration file directories, in /etc, /run, /usr/local/lib,
/usr/lib, and (#ifdef HAVE_SPLIT_USR) /lib. Factor that logic out into
a new helper macro, CONF_DIRS_NULSTR.
|
|
Currently, we save arguments passed as --prefix directly and compare them
later to absolute sysctl file-system paths. That is, you are required to
specify arguments to --prefix with leading /proc/sys/. This is kinda
uselesss. Furthermore, we replace dots by slashes in the name, which makes
it impossible to match on specific sysfs paths that have dots in their
name (like netdev names). The intention of this argument is clear, but it
never worked as expected.
This patch modifies --prefix to accept any kind of sysctl paths. It
supports paths prefixed with /proc/sys for compatibility (but drops the
erroneous dot->slash conversion), but instead applies normalize_sysctl()
which turns any name or path into a proper path. It then appends
/proc/sys/ so we can properly use it in matches.
Thanks to Jan Synacek <jsynacek@redhat.com> for catching this!
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
|
|
It turns out that plain sysctl understands a.b/c syntax to write to
/proc/sys/a/b.c. Support this for compatibility.
https://bugs.freedesktop.org/show_bug.cgi?id=77466
|
|
GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity. In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.
|
|
This adds the same root argument to search_and_fopen that
conf_files_list already has. Tools that use those two functions as a
pair can now be easily modified to load configuration files from an
alternate root filesystem tree.
|
|
|
|
- turn strv_merge into strv_extend_strv.
appending strv b to the end of strv a instead of creating a new strv
- strv_append: remove in favor of strv_extend and strv_push.
- strv_remove: write slightly more elegant
- strv_remove_prefix: remove unused function
- strv_overlap: use strv_contains
- strv_printf: STRV_FOREACH handles NULL correctly
|
|
including it in the log strings
|
|
|
|
Among other things this makes sure we always expose a --version command
and show it in the help texts.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=63477
|
|
You can write much more than just one line with this call (and we
frequently do), so let's correct the naming.
|
|
Since fabe5c0e5fce730aa66e10a9c4f9fdd443d7aeda, systemd-sysctl returns
a non-zero exit code if /etc/sysctl.conf does not exist, due to a
broken ENOENT check.
|
|
Also split out some fileio functions to fileio.c and provide a SELinux
aware pendant in fileio-label.c
see https://bugzilla.redhat.com/show_bug.cgi?id=881577
|
|
src/sysctl/sysctl.c: In function ‘parse_file’:
src/sysctl/sysctl.c:172:41: warning: ‘property’ may be used uninitialized in this function [-Wmaybe-uninitialized]
|
|
that work on .d/ directories
This unifies much of the logic behind them:
- All four will now ofllow the rule that the earlier file and earlier
assignment in the .d/ directories wins. Before, sysctl was the only
outlier, where the later setting always won.
- All four now support getopt() and --help on the command line.
- All four can now handle specification of configuration file names on
the command line to apply. The tools will automatically find them, and
apply them. Previously only tmpfiles could do that. This is useful for
%post scripts in RPMs and suchlike.
- This fixes various error path issues in conf_files_list()
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=869779
|
|
If the final key in any sysctl.d file is a duplicate, systemd-sysctl
will exit with an error (and no explaination why). Ignore this, as
duplicate keys are to be expected when overriding settings in the
directory hierarchy.
|
|
|
|
After if (r <= 0) r can't be 0 so
if (k < 0 && r == 0) never happens.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=767795
[ Simplified by iterating the config files in the backwards order -
no need for hashmap_update(). Other minor cleanups. -- michich ]
|
|
also a number of minor fixups and bug fixes: spelling, oom errors
that didn't print errors, not properly forwarding error codes,
few more consistency issues, et cetera
|
