| Age | Commit message (Collapse) | Author |
|---|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Regresssed during port to extract_first_word in
5ab22f3321d238957c03dcc6a6db76491e3989b8
CID #1338060
|
|
|
|
|
|
Remove support for RequiresOverridable= and RequisiteOverridable=
|
|
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
|
|
[Install] data
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes #1375, #1718, #1706
|
|
Instead, let the caller do that. Fix this by moving masked unit messages
into the caller, by returning a clear error code (ESHUTDOWN) by which
this may be detected.
|
|
|
|
main()
To avoid confusion as outlined in #1845.
|
|
This reverts commit 6a32563caa883bd11da1b255c38358e481c42ad7.
|
|
systemctl: fix cancel
|
|
|
|
Snapshots were never useful or used for anything. Many systemd
developers that I spoke to at systemd.conf2015, didn't even know they
existed, so it is fairly safe to assume that this type can be deleted
without harm.
The fundamental problem with snapshots is that the state of the system
is dynamic, devices come and go, users log in and out, timers fire...
and restoring all units to some state from the past would "undo"
those changes, which isn't really possible.
Tested by creating a snapshot, running the new binary, and checking
that the transition did not cause errors, and the snapshot is gone,
and snapshots cannot be created anymore.
New systemctl says:
Unknown operation snapshot.
Old systemctl says:
Failed to create snapshot: Support for snapshots has been removed.
IgnoreOnSnaphost settings are warned about and ignored:
Support for option IgnoreOnSnapshot= has been removed and it is ignored
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
|
|
http://www.freedesktop.org/software/systemd/man/systemctl.html#cancel%20JOB...
> If no job ID is specified, cancel all pending jobs
|
|
|
|
This adds support for a new environment variable
SYSTEMCTL_INSTALL_CLIENT_SIDE, that ensures that systemctl executes
install operations client-side instead of passing them to PID1. This is
useful in debugging situations, but even beyond that. However, we don't
want to make it official API, hence let's just make it an undocumented
environment variable.
Similar, add a second variable, SYSTEMCTL_SKIP_SYSV which allows
skipping the SysV chkconfig fall-back if set. This is useful for similar
reasons, and exposed as undocumented as environment variable for similar
reasons, too.
|
|
|
|
|
|
It's a very weak kind of virtualization, after all.
|
|
|
|
|
|
|
|
|
|
We don't need two functions that do essentialy the same, hence drop
path_get_parent(), and stick to dirname_malloc(), but move it to
path-util.[ch].
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
Let's introduce a common function that makes relative paths absolute and
warns about any errors while doing so.
|
|
I accidentally broke this a while back when I ported systemctl to the
verbs logic.
Add support for this back.
|
|
There was a bad memory access among other smaller issues.
|
|
This commit fixes Coverity #1325228
|
|
sd-daemon: fix return value for sd_is_mq
|
|
Shell completion tweaks
|
|
|
|
following parameter
We currently completely ignore the following parameter, but we really
should not, as that is actually the time to shut down on.
|
|
|
|
Also add a Coccinell patch to detect such locations in the future.
|
|
|
|
|
|
Let's parse the command line the same way in our various tools.
|
|
Otherwise, wall messages will not be generated for root.
|
|
|
|
In most verbs it's fine to treat the arguments array being NULL is empty
array, hence do so.
|
|
|
|
Also adds a couple of "return" statements, where they are missing.
|
|
Sometimes we have to connect to the system manager directly (early boot,
initrd, late boot, ...), sometimes through the system bus (unprivileged,
remote, logind, ...). Instead of guessing in advance, which kind of
connection we require (and sometimes guessing incorrectly), let's make
sure each time we need bus connection we request the right bus
explicitly.
This way, we set up exactly the bus connections require, never guess
incorrectly, and do so only immediately when necessary.
As effect this reworks avoid_bus() into install_client_side(), since
that's all it determines now: whether to install unit files client-side
or server-side (i.e. in PID 1).
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
Let's clarify that this function is specific to shutdown time
specifications, nothing else.
|
