| Age | Commit message (Collapse) | Author |
|---|
|
systemctl: Replace check_one_unit() by get_state_one_unit()
|
|
Fixes #2798
|
|
|
|
Fixes #2734
|
|
If HAVE_SYSV_COMPAT is not defined: ‘action_to_runlevel’ defined but not used
|
|
The get_state_one_unit returns the enum of the active state of the unit
Do not rely on the string value of the active state.
Fix #2718 since the refactoring allow to handle more case
|
|
tree-wide: merge pager_open_if_enabled() to the pager_open()
|
|
Many subsystems define own pager_open_if_enabled() function which
checks '--no-pager' command line argument and open pager depends
on its value. All implementations of pager_open_if_enabled() are
the same. Let's merger this function with pager_open() from the
shared/pager.c and remove pager_open_if_enabled() from all subsytems
to prevent code duplication.
|
|
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
Followup for 4524439edb7d.
|
|
https://github.com/systemd/systemd/issues/2431
Some newlines are added, but the output will still exceed 80 columns in many
cases. The fallback for oom conditions is changed from "n/a" to something
"<service>", and a similar pattern is used for the new code. This way we
have a realistic fallback for oom, which seems nicer than making the whole
function return an error code which would then have to be propagated.
$ systemctl -M fedora-rawhide restart systemd-networkd.service
Job for systemd-networkd.service failed because start of the service was attempted too often.
See "systemctl -M fedora-rawhide status systemd-networkd.service" and "journalctl -M fedora-rawhide -xe" for details.
To force a start use "systemctl -M fedora-rawhide reset-failed systemd-networkd.service"
followed by "systemctl -M fedora-rawhide start systemd-networkd.service" again.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Make sure we can properly process resource limit properties. Specifically, allow transient configuration of both the
soft and hard limit, the same way from the unit files. Previously, only the the hard rlimits could be configured but
they'd implicitly spill into the soft hard rlimits.
This also updates the client-side code to be able to parse hard/soft resource limit specifications. Since we need to
serialize two properties in bus_append_unit_property_assignment() now, the marshalling of the container around it is
now moved into the function itself. This has the benefit of shortening the calling code.
As a side effect this now beefs up the rlimit parser of "systemctl set-property" to understand time and disk sizes
where that's appropriate.
|
|
The verb entry got lost in the ultimate commit.
|
|
Fixes #2015
|
|
|
|
But also keep the old name as (undocumented) compatibility around.
The reload-or-try-restart was documented to be a NOP if the unit is not running, since the previous commits this is
also implemented. The old name suggests that the "try" logic only applies to restarting. Fix this, by moving the "try-"
to the front, to indicate that the whole option is a NOP if the service isn't running.
|
|
When checking a unit's state, don't ignore errors too eagerly, but generate proper error messages. Also, don't
synthesize an "unknown" state on error, but let the operation file. If a unit file isn't loaded treat this as
"inactive" as that's effectively what it means.
|
|
As it turns out all callers of check_unit_generic() already mangle unit names, or get the unit names directly from PID
1 (and hence arein normalized form anyway), hence there's no point in mangling then...
|
|
If we have many entries to add to an strv we really should try to be smarter than constantly realloc()ing the strv
array. Instead, grow it exponentially.
|
|
state
Previously we have return the not-found code, in the case that we found a
unit which does not belong to set active (resp. failed), which is the
opposite than what is written in man page.
|
|
Don't fail if the unit has a LoadError; otherwise `systemctl edit` cannot be
used to correct the error (e.g. multiple "ExecStart=" lines).
Remove file changed warning so cat output isn't interspersed with log messages.
Fixes #829
|
|
core: use bus_unit_check_load_state() in transaction_add_job_and_depe…
|
|
... to determine if color output should be enabled. If the variable is not set,
fall back to using on_tty(). Also, rewrite existing code to use
colors_enabled() where appropriate.
|
|
Fourteenth DNSSEC PR
|
|
When a unit was started with "systemctl --user" and it failed, error
messages is printed as "systemctl status". But it should be "systemctl
--user status".
|
|
Closes: #2299
|
|
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Regresssed during port to extract_first_word in
5ab22f3321d238957c03dcc6a6db76491e3989b8
CID #1338060
|
|
|
|
|
|
Remove support for RequiresOverridable= and RequisiteOverridable=
|
|
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
|
|
[Install] data
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes #1375, #1718, #1706
|
|
Instead, let the caller do that. Fix this by moving masked unit messages
into the caller, by returning a clear error code (ESHUTDOWN) by which
this may be detected.
|
|
|
|
main()
To avoid confusion as outlined in #1845.
|
|
This reverts commit 6a32563caa883bd11da1b255c38358e481c42ad7.
|
|
systemctl: fix cancel
|
|
|
|
Snapshots were never useful or used for anything. Many systemd
developers that I spoke to at systemd.conf2015, didn't even know they
existed, so it is fairly safe to assume that this type can be deleted
without harm.
The fundamental problem with snapshots is that the state of the system
is dynamic, devices come and go, users log in and out, timers fire...
and restoring all units to some state from the past would "undo"
those changes, which isn't really possible.
Tested by creating a snapshot, running the new binary, and checking
that the transition did not cause errors, and the snapshot is gone,
and snapshots cannot be created anymore.
New systemctl says:
Unknown operation snapshot.
Old systemctl says:
Failed to create snapshot: Support for snapshots has been removed.
IgnoreOnSnaphost settings are warned about and ignored:
Support for option IgnoreOnSnapshot= has been removed and it is ignored
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
|
|
http://www.freedesktop.org/software/systemd/man/systemctl.html#cancel%20JOB...
> If no job ID is specified, cancel all pending jobs
|
|
|
|
This adds support for a new environment variable
SYSTEMCTL_INSTALL_CLIENT_SIDE, that ensures that systemctl executes
install operations client-side instead of passing them to PID1. This is
useful in debugging situations, but even beyond that. However, we don't
want to make it official API, hence let's just make it an undocumented
environment variable.
Similar, add a second variable, SYSTEMCTL_SKIP_SYSV which allows
skipping the SysV chkconfig fall-back if set. This is useful for similar
reasons, and exposed as undocumented as environment variable for similar
reasons, too.
|
|
|
|
|
|
It's a very weak kind of virtualization, after all.
|
|
|
