summaryrefslogtreecommitdiff
path: root/src/systemctl
AgeCommit message (Collapse)Author
2013-07-26systemctl: move "dump" command from systemctl to systemd-analyzeLennart Poettering
It's an analysis command and its format is explicitly not covered by any stability guarantees, hence move away from systemctl and into systemd-analyze, minimizing the already large interface of systemctl a bit. This patch also adds auto-paging to the various systemd-analyze commands where that makes sense
2013-07-19man: update documentation of systemctl cgroup commandsLennart Poettering
2013-07-18systemctl: option to list units by stateMaciej Wereski
This allows to show only units with specified LOAD or SUB or ACTIVE state.
2013-07-17systemd,systemctl: export condition status and show failing conditionZbigniew Jędrzejewski-Szmek
$ systemctl --user status hoohoo hoohoo.service Loaded: loaded (/home/zbyszek/.config/systemd/user/hoohoo.service; static) Active: inactive (dead) start condition failed at Tue 2013-06-25 18:08:42 EDT; 1s ago ConditionPathExists=/tmp/hoo was not met Full information is exported over D-Bus: [(condition, trigger, negate, param, state),...] where state is one of "failed" (<0), "untested" (0), "OK" (>0). I've decided to use 0 for "untested", because it might be useful to differentiate different types of failure later on, without breaking compatibility. systemctl shows the failing condition, if there was a non-trigger failing condition, or says "none of the trigger conditions were met", because there're often many trigger conditions, and they must all fail for the condition to fail, so printing them all would consume a lot of space, and bring unnecessary attention to something that is quite low-level.
2013-07-18systemctl: also highlight a load state of "not-found" as redLennart Poettering
"not-found" is a recently added load state and was previously just a special case of "error". Since it also indicates a load error we should also highlight it red, the same way as "error" was treated before.
2013-07-12systemctl: remove unused variableLukas Nykryn
2013-07-11systemctl: show cgroup tree if cgroup is empty but has non-empty childrenLennart Poettering
This makes sure "systemctl status user.slice" shows a nice cgroup tree of all logged in users.
2013-07-10systemctl: suppress error message when doing "systemctl daemon-reexec"Lennart Poettering
When we issue a reexecution request via the private socket we need to expect a "Disconnected" in addition to "NoReply" when the connection is terminated.
2013-07-10systemctl: suppress error messages when checking whether a unit needs to be ↵Lennart Poettering
reloaded
2013-07-03build-sys: rename LEGACY to NOLEGACY to better reflect meaningDavid Coppa
https://bugs.freedesktop.org/show_bug.cgi?id=66542
2013-07-02replace tabs with spaces in various filesJason St. John
The affected files in this patch had inconsistent use of tabs vs. spaces for indentation, and this patch eliminates the stray tabs. Also, the opening brace of sigchld_hdl() in activate.c was moved so the opening braces are consistent throughout the file.
2013-07-02logind: port over to use scopes+slices for all cgroup stuffLennart Poettering
In order to prepare things for the single-writer cgroup scheme, let's make logind use systemd's own primitives for cgroup management. Every login user now gets his own private slice unit, in which his sessions live in a scope unit each. Also, add user@$UID.service to the same slice, and implicitly start it on first login.
2013-07-01systemctl: show per-unit cgroup tree correctly following the new propertyLennart Poettering
2013-06-27dbus: make DeviceAllow=/DevicePolicy= writableLennart Poettering
2013-06-27dbus: make more cgroup attributes runtime settableLennart Poettering
2013-06-27dbus: add infrastructure for changing multiple properties at once on units ↵Lennart Poettering
and hook some cgroup attributes up to it This introduces two bus calls to make runtime changes to selected bus properties, optionally with persistence. This currently hooks this up only for three cgroup atributes, but this brings the infrastructure to add more changable attributes. This allows setting multiple attributes at once, and takes an array rather than a dictionary of properties, in order to implement simple resetting of lists using the same approach as when they are sourced from unit files. This means, that list properties are appended to by this call, unless they are first reset via assigning the empty list.
2013-06-27core: general cgroup reworkLennart Poettering
Replace the very generic cgroup hookup with a much simpler one. With this change only the high-level cgroup settings remain, the ability to set arbitrary cgroup attributes is removed, so is support for adding units to arbitrary cgroup controllers or setting arbitrary paths for them (especially paths that are different for the various controllers). This also introduces a new -.slice root slice, that is the parent of system.slice and friends. This enables easy admin configuration of root-level cgrouo properties. This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in /dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is turned off by DevicePolicy=).
2013-06-25systemctl: conform to LSB with the "status" return codeHarald Hoyer
check for pid file existance before returning 1
2013-06-25systemctl: conform to LSB with the "status" return codeHarald Hoyer
http://fedoraproject.org/wiki/Packaging:SysVInitScript#Exit_Codes_for_the_Status_Action https://bugzilla.redhat.com/show_bug.cgi?id=975016
2013-06-19cgls,loginctl,systemctl: fix -lZbigniew Jędrzejewski-Szmek
Fixup for 98a6e13 "journalctl,loginctl,systemctl,systemd-cgls: add -l as alias for --full".
2013-06-17core: add new .slice unit type for partitioning systemsLennart Poettering
In order to prepare for the kernel cgroup rework, let's introduce a new unit type to systemd, the "slice". Slices can be arranged in a tree and are useful to partition resources freely and hierarchally by the user. Each service unit can now be assigned to one of these slices, and later on login users and machines may too. Slices translate pretty directly to the cgroup hierarchy, and the various objects can be assigned to any of the slices in the tree.
2013-06-17journalctl,loginctl,systemctl,systemd-cgls: add -l as alias for --fullDaniel Albers
https://bugs.freedesktop.org/show_bug.cgi?id=65850
2013-06-09Allow for the use of @ in remote host callsDaniel Wallace
Without this you have to use %40 with the -H flag because dbus doesn't like the @ sign being unescaped.
2013-06-09systemctl: remove extra padding from status outputZbigniew Jędrzejewski-Szmek
In 131601349 'systemctl: align all status fields to common column', padding was calculated for 'ListenStream: ...', etc. Later on in 45a4f7233 'systemctl: tweak output of Listen: fields a bit' output was changed to 'Listen: ... (stream)', but calculation didn't change. Just remove the calculation, since now the result will be always 8, and it it more important to have everything aligned to the widest field ("Main-PID"), than to save a few columns, usually at most two (e.g. "Listen"). Note: strlen is more natural, and is optimized to sizeof even with -O0.
2013-06-04systemctl: add missing verbs to helpZbigniew Jędrzejewski-Szmek
2013-05-30systemctl: suggest 'systemctl daemon-reload' without --systemZbigniew Jędrzejewski-Szmek
--system is default anyway, and some poor user might type 9 characters without needing to.
2013-05-30systemctl: add command set-log-levelVáclav Pavlín
Command changes current log level
2013-05-30systemctl: add commands set-default and get-defaultVáclav Pavlín
systemctl set-default NAME links the default.target to the given unit, get-default prints out the path to the currently set default target.
2013-05-23systemctl: mangle names when avoiding dbusVáclav Pavlín
Unit names were mangled in function enable_unit only when dbus was used. This patch adds mangling also when the dbus is not in use. This makes it possible to say e.g.: systemctl --root=/path enable cups without spelling cups.service out in full.
2013-05-21systemctl: honor "--no-legend" in 'list-sockets'Mantas Mikulėnas
2013-05-03systemctl: use GREEDY_REALLOC in one more placeZbigniew Jędrzejewski-Szmek
2013-05-03systemctl: add --plain option to list-dependenciesLukas Nykryn
This patch adds more script-friendly output for list-dependencies.
2013-05-02Add __attribute__((const, pure, format)) in various placesZbigniew Jędrzejewski-Szmek
I'm assuming that it's fine if a _const_ or _pure_ function calls assert. It is assumed that the assert won't trigger, and even if it does, it can only trigger on the first call with a given set of parameters, and we don't care if the compiler moves the order of calls.
2013-04-24systemctl: show reverse dependencies or before/after orderingZbigniew Jędrzejewski-Szmek
Also update completion scripts a bit.
2013-04-24Add set_consume which always takes ownershipZbigniew Jędrzejewski-Szmek
Freeing in error path is the common pattern with set_put().
2013-04-18move _cleanup_ attribute in front of the typeHarald Hoyer
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
2013-04-18systemctl: drop usage of "internally loaded modules"Lennart Poettering
I wouldn't know what "internally" is supposed to mean hear, and we use this terminology in this context nowhere else, so let's drop this.
2013-04-17systemctl:enable_sysv_units() more _cleanup_free_Harald Hoyer
2013-04-17systemctl: clarify usage of "--all" versus list-unit-filesHarald Hoyer
Novice users might think, that $ systemctl --all is equal to $ systemctl list-unit-files https://bugzilla.redhat.com/show_bug.cgi?id=748512
2013-04-16util: replace decimal_str_max() by a typesafe macro DECIMAL_STR_WIDTH()Lennart Poettering
DECIMAL_STR_WIDTH() now works on any numeric type, and is easier to distingish from DECIMAL_STR_MAX(). This also replaces another manual implementaiton of ulog10 by this macro.
2013-04-15Fix spelling errors using 'codespell' toolAnatol Pomozov
2013-04-12systemctl: new verb 'list-sockets'Zbigniew Jędrzejewski-Szmek
LISTEN UNIT ACTIVATES /dev/initctl systemd-initctl.socket systemd-initctl.service /dev/log systemd-journald.socket systemd-journald.service ... [::]:19531 systemd-journal-gatewayd.socket systemd-journal-gatewayd.service kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service 17 sockets listed. Pass --all to see loaded but inactive sockets, too.
2013-04-11errno is positiveZbigniew Jędrzejewski-Szmek
Make sure we compare errno against positive error codes. The ones in hwclock.c and install.c can have an impact, the rest are unlikely to be hit or in code that isn't widely used. Also check that errno > 0, to help gcc know that we are returning a negative error code.
2013-04-11systemctl: show the name of failing unit in redZbigniew Jędrzejewski-Szmek
It makes it easier to pick out problematic unit names from a long list.
2013-04-11systemctl: allow multiple arguments to --typeZbigniew Jędrzejewski-Szmek
This mirrors --property, and is generally useful. New functionality is used in bash completion. In case of zsh completion, new functionality is less useful because of caching. Nevertheless, zsh completion for restart is made to behave more-or-less the same as bash completion. At least sockets can be restarted.
2013-04-10systemctl: ellipsize job list only when necessary, highlight runningZbigniew Jędrzejewski-Szmek
I was debugging systemd waiting on a missing disk, and noticed that the job listing could use some polishing. Jobs that are actually running are highlighted, so it's easier to see what very actually waiting for. Also, the needed widths are precalculated, to use available columns more ecomically.
2013-04-05Use initalization instead of explicit zeroingZbigniew Jędrzejewski-Szmek
Before, we would initialize many fields twice: first by filling the structure with zeros, and then a second time with the real values. We can let the compiler do the job for us, avoiding one copy. A downside of this patch is that text gets slightly bigger. This is because all zero() calls are effectively inlined: $ size build/.libs/systemd text data bss dec hex filename before 897737 107300 2560 1007597 f5fed build/.libs/systemd after 897873 107300 2560 1007733 f6075 build/.libs/systemd … actually less than 1‰. A few asserts that the parameter is not null had to be removed. I don't think this changes much, because first, it is quite unlikely for the assert to fail, and second, an immediate SEGV is almost as good as an assert.
2013-04-05systemctl: tweak drop-in displayLennart Poettering
So far we didn't place spaces between the box drawing chars and the values next to them. Let's be consistent here. (Or to turn this around: if we really want to place a space there we probably should do that in all our tree outputs, not just here...)
2013-04-05systemctl: tweak output of Listen: fields a bitLennart Poettering
It's probably a good idea to minimize the number of field names to show in the "systemctl status" output, in order to make them useful as a guide for the reader how things are "grouped". This patch moves information about the used socket technology to the end of the output lines in brackets, rather than into the field names. This turns the used socket technology into what it is -- peripheral meta information -- instead of something that was at the core. New output: systemd-journald.socket - Journal Socket Loaded: loaded (/usr/lib/systemd/system/systemd-journald.socket; static) Active: active (running) since Fr 2013-03-29 02:16:30 CET; 1 weeks 0 days ago Docs: man:systemd-journald.service(8) man:journald.conf(5) man:systemd-journald.service(8) man:journald.conf(5) Listen: /run/systemd/journal/stdout (Stream) /run/systemd/journal/socket (Datagram) /dev/log (Datagram)
2013-04-05systemctl: Add DropIn paths to status messageOleksii Shevchuk
$ systemctl status null.target null.target - NYAN Loaded: loaded (/home/alxchk/.config/systemd/user/null.target; disabled) Drop-In: /home/alxchk/.config/systemd/user/null.target.d └─ descr.conf, install-1.conf, install.conf /etc/systemd/user/null.target.d └─ test.conf Active: active since Пт 2013-04-05 20:42:13 EEST; 1min 58s ago