summaryrefslogtreecommitdiff
path: root/src/systemctl
AgeCommit message (Collapse)Author
2016-06-09systemctl: fix return values on successsystemd/v230-3Christian Hesse
2016-06-09{machine,system}ctl: always pass &changes and &n_changes (#3350)Christian Hesse
We have to pass addresses of changes and n_changes to bus_deserialize_and_dump_unit_file_changes(). Otherwise we are hit by missing information (subsequent calls to unit_file_changes_add() to not add anything). Also prevent null pointer dereference in bus_deserialize_and_dump_unit_file_changes() by asserting. Fixes #3339
2016-05-20Merge pull request #3290 from htejun/cgroup2-io-compatLennart Poettering
Implement compat translation between IO* and BlockIO* settings
2016-05-19systemctl: suppress no-[Install] hint when --quiet is used (#3295)Zbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1336960
2016-05-19systemctl: reload configuration when enabling sysv units too (#3297)Franck Bui
After enabling/disabling a unit, the daemon configuration is expected to be unless '--no-reload' option is passed. However this is not done when enabling a sysv units. This can lead to the following scenario: $ cp /etc/init.d/named /etc/init.d/foo $ systemctl enable foo foo.service is not a native service, redirecting to systemd-sysv-install Executing /usr/lib/systemd/systemd-sysv-install enable foo $ systemctl start foo Failed to start foo.service: Unit foo.service failed to load: No such file or directory. This can also be seen after installing a package providing a sysv service: the service can't be started unless 'daemon-reload' is called manually. This shouldn't be needed and this patch will fix this case too since during package installation, the service is expected to be enabled/disabled.
2016-05-19systemctl: restore the no-sync option for legacy halt (#3249)tblume
The sync() call on shutdown had been removed with commit 57371e5829a61e5ee6c9f98404dfc729d6c62608 together with the no-sync option for the shutdown commands. The sync call was restored in commit 4a3ad39957399c4a30fc472a804e72907ecaa4f9 but the no-sync option wasn't re-added. I think we should restore this option at least for the legacy halt command.
2016-05-18core: introduce CGroupIOLimitType enumsTejun Heo
Currently, there are two cgroup IO limits, bandwidth max for read and write, and they are hard-coded in various places. This is fine for two limits but IO is expected to grow more limits - low, high and max limits for bandwidth and IOPS - and hard-coding each limit won't make sense. This patch replaces hard-coded limits with an array indexed by CGroupIOLimitType and accompanying string and default value tables so that new limits can be added trivially.
2016-05-16Merge pull request #3193 from htejun/cgroup-io-controllerLennart Poettering
core: add io controller support on the unified hierarchy
2016-05-09tree-wide: rename draw_special_char to special_glyphZbigniew Jędrzejewski-Szmek
That function doesn't draw anything on it's own, just returns a string, which sometimes is more than one character. Also remove "DRAW_" prefix from character names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't draw anything, and are always used as an argument to special_glyph(). Rename "DASH" to "MDASH", as there's more than one type of dash.
2016-05-07systemctl: do not print header if no units will be listedZbigniew Jędrzejewski-Szmek
"0 units listed." is still printed.
2016-05-07systemctl: rewrite code to explicitly take care of n_units==0 caseZbigniew Jędrzejewski-Szmek
Coverity was complaing, but it was a false positive (CID #1354669). Nevertheless, it's better to rewrite the code so that units is never null.
2016-05-06systemctl: indentation fixLennart Poettering
2016-05-05core: add io controller support on the unified hierarchyTejun Heo
On the unified hierarchy, blkio controller is renamed to io and the interface is changed significantly. * blkio.weight and blkio.weight_device are consolidated into io.weight which uses the standardized weight range [1, 10000] with 100 as the default value. * blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max. Expansion of throttling features is being worked on to support work-conserving absolute limits (io.low and io.high). * All stats are consolidated into io.stats. This patchset adds support for the new interface. As the interface has been revamped and new features are expected to be added, it seems best to treat it as a separate controller rather than trying to expand the blkio settings although we might add automatic translation if only blkio settings are specified. * io.weight handling is mostly identical to blkio.weight[_device] handling except that the weight range is different. * Both read and write bandwidth settings are consolidated into CGroupIODeviceLimit which describes all limits applicable to the device. This makes it less painful to add new limits. * "max" can be used to specify the maximum limit which is equivalent to no config for max limits and treated as such. If a given CGroupIODeviceLimit doesn't contain any non-default configs, the config struct is discarded once the no limit config is applied to cgroup. * lookup_blkio_device() is renamed to lookup_block_device(). Signed-off-by: Tejun Heo <htejun@fb.com>
2016-05-02core: fix detection whether per-unit drop-ins changedLennart Poettering
This fixes fall-out from 6d10d308c6cd16528ef58fa4f5822aef936862d3. Until that commit, do determine whether a daemon reload was required we compare the mtime of the main unit file we loaded with the mtime of it on disk for equality, but for drop-ins we only stored the newest mtime of all of them and then did a "newer-than" comparison. This was brokeni with the above commit, when all checks where changed to be for equality. With this change all checks are now done as "newer-than", fixing the drop-in mtime case. Strictly speaking this will not detect a number of changes that the code before above commit detected, but given that the mtime is unlikely to go backwards, and this is just intended to be a helpful hint anyway, this looks OK in order to keep things simple. Fixes: #3123
2016-04-29core: Filter by unit name behind the D-Bus, instead on the client side (#3142)kayrus
This commit improves systemd performance on the systems which have thousands of units.
2016-04-22systemctl: add two minor assert()sLennart Poettering
2016-04-22shared: drop kernel_thread bool from cgroups show codeLennart Poettering
Make this an output flag instead, so that our function prototypes can lose one parameter
2016-04-22core,systemctl: add bus API to retrieve processes of a unitLennart Poettering
This adds a new GetProcesses() bus call to the Unit object which returns an array consisting of all PIDs, their process names, as well as their full cgroup paths. This is then used by "systemctl status" to show the per-unit process tree. This has the benefit that the client-side no longer needs to access the cgroupfs directly to show the process tree of a unit. Instead, it now uses this new API, which means it also works if -H or -M are used correctly, as the information from the specific host is used, and not the one from the local system. Fixes: #2945
2016-04-21systemctl,pid1: do not warn about missing install info with "preset"Zbigniew Jędrzejewski-Szmek
When "preset" was executed for a unit without install info, we'd warn similarly as for "enable" and "disable". But "preset" is usually called for all units, because the preset files are provided by the distribution, and the units are under control of individual programs, and it's reasonable to call "preset" for all units rather then try to do it only for the ones that can be installed. We also don't warn about missing info for "preset-all". Thus it seems reasonable to silently ignore units w/o install info when presetting. (In addition, when more than one unit was specified, we'd issue the warning only if none of them had install info. But this is probably something to fix for enable/disable too.)
2016-04-19systemctl: hide "following" units if '--all' is not passed (#2967)Franck Bui
No need to dump all the redundant device units on the user, just because he specified that he wants to see units of a specific state. This was broken by commit ebc962656cee33e3e8395f456a8208c3ca41969c.
2016-04-19systemctl: warning about missing install info for template unitsZbigniew Jędrzejewski-Szmek
The advice string didn't talk about template units at all. Extend it and print when trying to enable a template unit without install info. Fixes #2345.
2016-04-19shared/install,systemctl,core: report offending file on installation errorZbigniew Jędrzejewski-Szmek
Fixes #2191: $ systemctl --root=/ enable sddm Created symlink /etc/systemd/system/display-manager.service, pointing to /usr/lib/systemd/system/sddm.service. $ sudo build/systemctl --root=/ enable gdm Failed to enable unit, file /etc/systemd/system/display-manager.service already exists and is a symlink to /usr/lib/systemd/system/sddm.service. $ sudo build/systemctl --root= enable sddm $ sudo build/systemctl --root= enable gdm Failed to enable unit: File /etc/systemd/system/display-manager.service already exists and is a symlink to /usr/lib/systemd/system/sddm.service. (I tried a few different approaches to pass the error information back to the caller. Adding a new parameter to hold the error results in a gigantic patch and a lot of hassle to pass the args arounds. Adding this information to the changes array is straightforward and can be more easily extended in the future.) In case local installation is performed, the full set of errors can be reported and we do that. When running over dbus, only the first error is reported.
2016-04-18Various formatting and style fixesZbigniew Jędrzejewski-Szmek
2016-04-16systemctl/core: ignore masked units in preset-allZbigniew Jędrzejewski-Szmek
With any masked unit that would that would be enabled by presets, we'd get: test@rawhide $ sudo systemctl preset-all Failed to execute operation: Unit file is masked. test@rawhide $ sudo systemctl --root=/ preset-all Operation failed: Cannot send after transport endpoint shutdown Simply ignore those units: test@rawhide $ sudo systemctl preset-all Unit xxx.service is masked, ignoring.
2016-04-16tree-wide: use ERFKILL instead of ESHUTDOWN for "unit masked"Zbigniew Jędrzejewski-Szmek
If the error code ever leaks (we print the strerror error instead of providing our own), the message for ESHUTDOWN is "Cannot send after transport endpoint shutdown", which can be misleading. In particular it suggest that some mishandling of the dbus connection occured. Let's change that to ERFKILL which has the advantage that a) it sounds implausible as actual error, b) has the connotation of disabling something manually.
2016-04-16systemctl: make --root=/ disable dbus againZbigniew Jędrzejewski-Szmek
Before 0f03c2a4c093 specifying any path would cause the systemctl client to do the installation itself, instead of going over dbus. Restore that behaviour.
2016-04-13systemctl: fix leakZbigniew Jędrzejewski-Szmek
CID #1354670.
2016-04-13tree-wide: remove useless NULLs from strjoinaZbigniew Jędrzejewski-Szmek
The coccinelle patch didn't work in some places, I have no idea why.
2016-04-12systemctl: when we want to know whether there's a native unit file, don't ↵Lennart Poettering
choke on ELOOP ELOOP indicates that there's a symlink in /etc for a native unit file, and that's completely OK.
2016-04-12core: make sure we generate a nicer error when a linked unit is attempted to ↵Lennart Poettering
be enabled We don't allow using config symlinks to enable units, but the error message we printed was awful. Fix that, and generate a more readable error. Fixes #3010.
2016-04-12core,systemctl: add new "systemctl revert" commandLennart Poettering
This allows dropping all user configuration and reverting back to the vendor default of a unit file. It basically undoes what "systemctl edit", "systemctl set-property" and "systemctl mask" do.
2016-04-12systemctl: don't confuse sysv code with generated unitsLennart Poettering
The SysV compat code checks whether there's a native unit file before looking for a SysV init script. Since the newest rework generated units will show up in the unit path, and hence the checks ended up assuming that there always was a native unit file for each init script: the generated one. With this change the generated unit file directory is suppressed from the search path when this check is done, to avoid the confusion.
2016-04-12systemctl: add error message when we get unexpected event from waitid()Lennart Poettering
We should log about everything we don't expect. Also, add a comment for one case were we do not log, on purpose, and make it use a separate error code.
2016-04-12systemctl: fix incorrect errno for error messageLennart Poettering
2016-04-12systemctl: move check whether a service exists as native unit file to install.cLennart Poettering
Move the search path check from the SysV service compat support into install.c so that we can reuse the usual algorithm instead of rolling a private loop for this.
2016-04-12core: rework reboot parameter logic a bitLennart Poettering
Always warn if something fails, and clarify that the involved utility functions do so in their name. Drop the REBOOT_PARAM_FILE macro. We don't do this for other flag file paths like this, so don't do this for this one either. The path isn't configurable anyway, hence let's make this easier to read by avoiding this one indirection.
2016-04-12install: introduce a new unit file state "transient"Lennart Poettering
Now, that the search path logic knows the unit path for transient units we also can introduce an explicit unit file state "transient" that clarifies to the user what kind of unit file he is encountering.
2016-04-12core: remove ManagerRunningAs enumLennart Poettering
Previously, we had two enums ManagerRunningAs and UnitFileScope, that were mostly identical and converted from one to the other all the time. The latter had one more value UNIT_FILE_GLOBAL however. Let's simplify things, and remove ManagerRunningAs and replace it by UnitFileScope everywhere, thus making the translation unnecessary. Introduce two new macros MANAGER_IS_SYSTEM() and MANAGER_IS_USER() to simplify checking if we are running in one or the user context.
2016-04-12systemctl: port systemctl over to the new LookupPaths configuration ↵Lennart Poettering
directory fields
2016-04-12core: when enabling a generated unit file, return a clean errorLennart Poettering
Let's be precise when the user tries to invoke an "enable" operation on a generated unit file.
2016-04-12core: add a new unit file state "generated"Lennart Poettering
Now that we store the generator directories in LookupPaths we can use this to intrdouce a new unit file state called "generated", for units in these directories. Fixes: #2348
2016-04-12core: rework generator dir logic, move the dirs into LookupPaths structureLennart Poettering
A long time ago – when generators where first introduced – the directories for them were randomly created via mkdtemp(). This was changed later so that they use fixed name directories now. Let's make use of this, and add the genrator dirs to the LookupPaths structure and into the unit file search path maintained in it. This has the benefit that the generator dirs are now normal part of the search path for all tools, and thus are shown in "systemctl list-unit-files" too.
2016-04-06Merge pull request #2962 from keszybz/value-optionLennart Poettering
Add `--value` option to systemctl and loginctl to only print values
2016-04-04systemctl: add --value optionZbigniew Jędrzejewski-Szmek
With this option, systemctl will only print the rhs in show: $ systemctl show -p Wants,After systemd-journald --value systemd-journald.socket ... systemd-journald-dev-log.socket ... This is useful in scripts, because the need to call awk or similar is removed.
2016-04-01systemctl: use correct printf macros for uint32Martin Pitt
%u is a simple uint which might not be 32 bit on every platform. Use PRIu32 instead.
2016-03-23systemctl: no need to pass --all if inactive is explicitly requested in ↵Franck Bui
list-units If list-units command is explicitly asked to show inactive units by using '--state=inactive' option, there's no need to force the user to pass '--all' option to include inactive units in the search in this case.
2016-03-07Merge pull request #2768 from benjarobin/fix-2718Daniel Mack
systemctl: Replace check_one_unit() by get_state_one_unit()
2016-03-05systemctl: improve error message when starting a unit failedRonny Chevalier
Fixes #2798
2016-03-03systemctl: add missing OOM checkRonny Chevalier
2016-03-02systemctl: rm empty dropin dirs after cancelled editRonny Chevalier
Fixes #2734