summaryrefslogtreecommitdiff
path: root/src/systemctl
AgeCommit message (Collapse)Author
2013-02-27systemctl: fix indentationLennart Poettering
2013-02-22systemctl: generalize action table to be usable in more action<->verb mappingsMichal Schmidt
Should be no functional change.
2013-02-22systemctl: make shutdown operations use irreversible jobsMichal Schmidt
Occasionally people report problem with reboot/poweroff operations hanging in the middle. One known cause is when a new transaction to start a unit is enqueued while the shutdown is going on. The start of the unit conflicts with the shutdown jobs, so they get cancelled. The failure case can be quite unpleasant, becase getty and sshd may already be stopped. Fix it by using irreversible jobs for shutdown (reboot/poweroff/...) actions. This applies to commands like "reboot", "telinit 6", "systemctl reboot". Should someone desire to use reversible jobs, they can say "systemctl start reboot.target".`
2013-02-22core, systemctl: add support for irreversible jobsMichal Schmidt
Add a new job mode: replace-irreversibly. Jobs enqueued using this mode cannot be implicitly canceled by later enqueued conflicting jobs. They can however still be canceled with an explicit "systemctl cancel" call.
2013-02-22systemctl: make "systemctl default" use "isolate" job modeMichal Schmidt
"systemctl default" should behave identically to "telinit N" (where N is the corresponding runlevel target number), therefore it should use isolate job mode too.
2013-02-16systemctl: allow comma sepearted property listsZbigniew Jędrzejewski-Szmek
2013-02-16systemctl: Don't give re-activation warning if unit is maskedJan Janssen
2013-02-16systemctl: allow status with no unitsZbigniew Jędrzejewski-Szmek
This makes 'status' behave like 'list-units': systemctl status -> status of all units systemctl -t error status -> status of error units systemctl -t mount status -> etc.
2013-02-14systemctl: print wall message only if successfulZbigniew Jędrzejewski-Szmek
systemctl would write to the wall even if unsuccessful. https://bugs.freedesktop.org/show_bug.cgi?id=60393
2013-02-14systemctl: use automatic cleanupZbigniew Jędrzejewski-Szmek
2013-02-14honor SELinux labels, when creating and writing config filesHarald Hoyer
Also split out some fileio functions to fileio.c and provide a SELinux aware pendant in fileio-label.c see https://bugzilla.redhat.com/show_bug.cgi?id=881577
2013-02-13Move systemctl dot to systemd-analyze dotSimon Peeters
2013-02-13systemctl: use parse_unit_infoMarc-Antoine Perennou
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
2013-02-13dbus: import struct unit_info from systemctlMarc-Antoine Perennou
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
2013-01-30systemctl: Fix wrong assertion testMauro Dreissig
2013-01-19unit: optionally allow making cgroup attribute changes persistentLennart Poettering
2013-01-18systemctl: print the user session journal for user session units.Mirco Tischler
2013-01-18systemctl: add new "get-cgroup-attr" to query current cgroup attribute valueLennart Poettering
Also adds a pair of bus calls for this to the daemon.
2013-01-18systemctl: it's probably a good idea not to alter return parameters if we failLennart Poettering
We generally follow the rule not to touch return values unless we succeed, so for the sake of uniformity do the same here.
2013-01-18systemctl: no need to check this explicitly, we already checked it a few ↵Lennart Poettering
lines up anyway, so let's just assert
2013-01-18systemctl: we can make this faster and shorten it a bit with strv_extend()Lennart Poettering
Now that strv_extend() is not so slow anymore, we can make use of it, to shorten our code a bit.
2013-01-18systemctl: make list-dependencies default to default.targetLennart Poettering
2013-01-18systemctl: we can use nulstr_contains() for this lookupLennart Poettering
It's a bit easier to read...
2013-01-17systemctl add command list-dependenciesLukas Nykryn
systemctl list-dependencies lists all unit's dependecies and recursively expands all subsidiary target units into a tree. Primary purpose for this command is to show all units which are enabled in specified target.
2013-01-16systemctl,loginctl,cgls: do not ellipsize cgroup members when --full is ↵Lukas Nykryn
specified New file output.h with output flags and modes. --full parameter also for cgls and loginctl. Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup, show_cgroup_and_extra, show_cgroup_and_extra_by_spec). get_process_cmdline with max_length == 0 will not ellipsize output. Replace LINE_MAX with 0 in some calls of get_process_cmdline. [zj: Default to --full when under pager for clgs. Drop '-f' since it wasn't documented and didn't actually work. Reindent a bit. ]
2013-01-15systemctl: fix assertion hit by incorrect comparisonDave Reisner
2013-01-15Typo fixOleksii Shevchuk
2013-01-15systemctl: when inhibiting shutdown/suspend also check for other login sessionsLennart Poettering
2013-01-14systemctl: drop compat with really really old systemd versionsLennart Poettering
2013-01-14systemctl: be smarter when mangling snapshot namesLennart Poettering
For "systemctl snapshot" it makes no sense to complete an incomplete name with ".service" as we previously did, use ".snapshot" instead. Also, don't bother with mount units or suchlike, we know that this must be a snapshot and hence is the only sane way for completion.
2013-01-14systemctl: numerous modernizationsLennart Poettering
2013-01-14core: add bus API and systemctl commands for altering cgroup parameters ↵Lennart Poettering
during runtime
2013-01-14systemctl: honour inhibitors only when running unprivilegedLennart Poettering
2013-01-14systemctl: don't hit an assert if we try to reboot and dbus is deadLennart Poettering
https://bugzilla.redhat.com/show_bug.cgi?id=889624
2013-01-14systemctl: rework is-active and is-failed codeLennart Poettering
2013-01-11systemctl: honour inhibitors when shutting down or entering sleep stateLennart Poettering
2013-01-10dbus: duplicate Job.Cancel() as CancelJob() and Snapshot.Remove() as ↵Lennart Poettering
RemoveSnapshot() on the Manager interface For all other object mehtods there are already counterparts on the manager object, as they help us reduce round-trips. So let's complete this, and reduce complexity on the client side a bit. As a side effect this also makes "systemctl snapshot" without arguments work again.
2013-01-04build-sys: drop all distribution specfic checksLennart Poettering
Yay, we now have a completely generic systemd. No distribution specific checks anymore!
2013-01-04systemctl: enable chkconfig compat only if chkconfig is found rather than ↵Lennart Poettering
based on distro
2013-01-04systemctl: add is-failedThomas Hindoe Paaboel Andersen
Adds is-failed to join is-active and is-enabled. I grabbed this one from the todo list. Most of the functionality was already there for is-active. I just needed to make check_one_unit take the states to check for as an argument instead of the hardcoded "active" and "reloading". is-failed will return 1 if none of the units given are failed. This is different from is-active which will return 3 if none of the units given are active. It returns 3 with this comment: /* According to LSB: "program is not running" */ As that does not make sense when looking for failed units I simply chose 1 instead.
2012-12-28systemctl: switch-root - read init= from /proc/cmdlineTom Gundersen
If the path to init is not specified as an argumnt to systemctl, but init= is given on the kernel commandline, use that. This means the initrd does not need glue code to parse the kernel commandline before passing on init= to systemctl. Cc: Harald Hoyer <harald@redhat.com> Cc: Dave Reisner <dreisner@archlinux.org>
2012-12-24systemctl: don't show cgroup field for a unit if cgroup is emptyLennart Poettering
2012-12-06systemctl: verbose message on missing [Install]Michal Schmidt
People still don't understand what the message implies. We have to be more verbose (or more intelligent and detect some of the cases automatically, but that's not so easy). https://bugzilla.redhat.com/show_bug.cgi?id=884438
2012-12-03systemctl: fix typos in help textUmut Tezduyar
2012-11-23time-util: also rename FORMAT_TIMESTAMP_PRETTY → _MAXLennart Poettering
2012-11-23util: rename format_timestamp_pretty() to format_timestamp_relative() ↵Lennart Poettering
because that describes much better what it does
2012-11-16journal: recommend journalctl -x more oftenLennart Poettering
2012-11-15systemctl: add help for --type/-tZbigniew Jędrzejewski-Szmek
The list of types and load states if lengthy, so a little reminder can be sometimes useful.
2012-11-15systemctl: remove empty line in case of no unitsZbigniew Jędrzejewski-Szmek
2012-11-12enable localization for common *ctl commandsDave Reisner
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-29 13:38:43 +0000