| Age | Commit message (Collapse) | Author |
|---|
|
let's export as little as we can
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
If there is a lot of initscripts and dependencies between them we might
end generating After= (and similar) lines which are longer then LINE_MAX
and thus rejected by parser in systemd.
Fixes #2099
|
|
[Install] data
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes #1375, #1718, #1706
|
|
I assume this was a typo in c279613f861636c816f2f7df051b02c2f55a5134
|
|
- Make sure we log each error at least once, and at most once
- Replace FOREACH_WORD loops by extract_first_word() loops
- Use FOREACH_DIRENT() for directory loops
- Use free_and_strdup() where appropriate
- Do not operate on half-loaded SysV files
- Always properly free all memory
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
|
|
Some java packages puts a symlink to init.d and its content is pointing
to latest java installation (because you can have multiple javas on you
machine).
On rhel-based distributions you can use alternatives --initscript
instread of symlink, but this is not usable for other distributions.
|
|
Fix weird coding-style:
- proper white-space
- no if (func() >= 0) bail-outs
- fix braces
- avoid 'r' for anything but errno
- init _cleanup_ variables unconditionally, even if not needed
|
|
While the LSB suggests only [A-Za-z0-9], that doesn't prevent admins
from doing the wrong thing. Lets not generate invalid names in
that case.
|
|
Do not assume that a non-service unit type is a target.
|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
Would happen if lookup_paths_init returns an error.
|
|
|
|
This code appears to follow the following convention:
- all errors are logged at point of origin
- oom errors abort execution, non-oom errors are logged but
execution continues.
Make sure all ooms result in a log message, and remove warning which could
not be reached. Downgrade non-fatal errors to warnings.
|
|
No functional change intended. Just splitting this out to make
it easier to edit in the future.
|
|
Followup for 7a03974a6f.
|
|
|
|
With debugging on, sysv-generator would print the full set of
lookup paths for *every* sysv script.
While at it, pass LookupPaths as a pointer in sysv-generator,
and constify it everywhere.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Fix result testing of is_symlink() to ignore negative results, which happen if
the file name does not exist at all. In this case we do not want a warning and
unlink the non-existing link.
https://bugs.debian.org/778700
|
|
With this change runlevel 2, 3, 4 are mapped to multi-user.target for
good, and 5 to graphical.target. This was already the previous mapping
but is now no longer reconfigurable, but hard-coded into the core.
This should generally simplify things, but also fix one bug: the
sysv-generator previously generated symlinks to runlevel[2-5].target
units, which possibly weren't picked up if these aliases were otherwise
only referenced by the real names "multi-user.target" and
"graphical.target".
We keep compat aliases "runlevel[2345].target" arround for cases where
this target name is explicitly requested.
|
|
This avoids taking the SysV init script enablement state into account if we
have native units. Otherwise systemctl disable on native unit would not
be respected in the presence of an enabled SysV script.
Also, there's no need to do all the parsing and creation of service files if we
already have a native systemd unit for the processed SysV init script.
|
|
http://lists.freedesktop.org/archives/systemd-devel/2015-January/027594.html
|
|
Commit 4e48855534 caused the .sh suffix to be stripped from the original
"filename", which caused the generated units to call the wrong init.d script.
Only use the .sh stripped file name for comparing with Provides:, not for
generating the Exec*= lines.
Spotted by sysv-generator-test.
|
|
the same sysv script
It's sufficient to check once if something is a regular file, hence,
let's do that.
|
|
|
|
|
|
Otherwise, if the directory contains other directories we fail
at fopen in load_sysv() with EISDIR.
|
|
Since commit b7e7184 the SysV generator creates symlinks for all "Provides:" in
the LSB header. However, this is too greedy; there are cases where the
creation of a unit .service file fails because of an already existing
symlink with the same name:
- Backup files such as /etc/init.d/foo.bak still have "Provides: foo", and
thus get a foo.service -> foo.bak.service link. foo.bak would not be enabled
in rcN.d/, but we (deliberately) create units for all executables in init.d/
so that a manual "systemctl start" works. If foo.bak is processed before,
the symlink already exists.
- init.d/bar has "Provides: foo", while there also is a real init.d/foo. The
former would create a link foo.service -> bar.service, while the latter
would fail to create the real foo.service.
If we encounter an existing symlink, just remove it before writing a real unit.
Note that two init.d scripts "foo" and "bar" which both provide the same name
"common" already work. The first processed init script wins and creates the
"common.service" symlink, and the second just fails to create the symlink
again. Thus create an additional test case for this to ensure that it keeps
working sensibly.
https://bugs.debian.org/775404
|
|
When deciding whether the provided name equals the file name in
sysv_translate_facility(), also consider them equal if the file name has a
".sh" suffix.
This was uncovered by commit b7e7184 which then created a symlink
"<name>.service" to itself for ".sh" suffixed init.d scripts.
For additional robustness, refuse to create symlinks to itself in add_alias().
Add test case which reproduces the bug.
https://bugs.debian.org/775889
|
|
|
|
This fixes a memory leak introduced by
1ed0c19f81fd13cdf283c6def0168ce122a853a9
|
|
The original loop called fix_order() on each service immediately after
loading it, but fix_order() would reference other units which were not
loaded yet.
This resulted in bogus and unnecessary orderings based on the static
start priorities.
Therefore call load_sysv() for every init script when traversing them in
enumerate_sysv(). This ensures that all units are loaded when
fix_order() is called.
Bug-Debian: https://bugs.debian.org/771118
|
|
The list of provided facility names as specified via Provides: in the
LSB header was originally implemented by adding those facilities to the
Names= property via unit_add_name().
In commit 95ed3294c632f5606327149f10cef1eb34422862 the internal SysV
support was replaced by a generator and support for parsing the Names=
option had been removed from the unit file parsing in v186.
As a result, Provides: for non-virtual facility was dropped when
introducing the sysv-generator.
Since quite a few SysV init scripts still use that functionality (at
least in distros like Debian which have a large body of SysV init
scripts), add back support by making those facility names available via
symlinks to the unit filename to ensure correct orderings between
SysV init scripts which use those facility names.
Bug-Debian: https://bugs.debian.org/774335
|
|
|
|
hidden_file() is a bit more precise, since dot files usually shouldn't
be ignored, but certainly be considered hidden.
|
|
Option was being parsed but not used for anything.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_unit_(debug|info|notice|warning|error|emergency)\(([^"]+), "(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_unit_\1_errno(\2, \5, "\3%m"\4);/'
|
|
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
