summaryrefslogtreecommitdiff
path: root/src/sysv-generator
AgeCommit message (Collapse)Author
2016-01-21sysv-generator: do not join dependencies on one line, split themLukas Nykryn
If there is a lot of initscripts and dependencies between them we might end generating After= (and similar) lines which are longer then LINE_MAX and thus rejected by parser in systemd. Fixes #2099
2015-11-12install: follow unit file symlinks in /usr, but not /etc when looking for ↵Lennart Poettering
[Install] data Some distributions use alias unit files via symlinks in /usr to cover for legacy service names. With this change we'll allow "systemctl enable" on such aliases. Previously, our rule was that symlinks are user configuration that "systemctl enable" + "systemctl disable" creates and removes, while unit files is where the instructions to do so are store. As a result of the rule we'd never read install information through symlinks, since that would mix enablement state with installation instructions. Now, the new rule is that only symlinks inside of /etc are configuration. Unit files, and symlinks in /usr are now valid for installation instructions. This patch is quite a rework of the whole install logic, and makes the following addional changes: - Adds a complete test "test-instal-root" that tests the install logic pretty comprehensively. - Never uses canonicalize_file_name(), because that's incompatible with operation relative to a specific root directory. - unit_file_get_state() is reworked to return a proper error, and returns the state in a call-by-ref parameter. This cleans up confusion between the enum type and errno-like errors. - The new logic puts a limit on how long to follow unit file symlinks: it will do so only for 64 steps at max. - The InstallContext object's fields are renamed to will_process and has_processed (will_install and has_installed) since they are also used for deinstallation and all kinds of other operations. - The root directory is always verified before use. - install.c is reordered to place the exported functions together. - Stricter rules are followed when traversing symlinks: the unit suffix must say identical, and it's not allowed to link between regular units and templated units. - Various modernizations - The "invalid" unit file state has been renamed to "bad", in order to avoid confusion between UNIT_FILE_INVALID and _UNIT_FILE_STATE_INVALID. Given that the state should normally not be seen and is not documented this should not be a problematic change. The new name is now documented however. Fixes #1375, #1718, #1706
2015-11-02sysv-generator: remove duplicate constThomas Hindoe Paaboel Andersen
I assume this was a typo in c279613f861636c816f2f7df051b02c2f55a5134
2015-10-31sysv-generator: modernizeLennart Poettering
- Make sure we log each error at least once, and at most once - Replace FOREACH_WORD loops by extract_first_word() loops - Use FOREACH_DIRENT() for directory loops - Use free_and_strdup() where appropriate - Do not operate on half-loaded SysV files - Always properly free all memory
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: split stat()/statfs()/stavfs() related calls into stat-util.[ch]Lennart Poettering
2015-10-27util-lib: split out hex/dec/oct encoding/decoding into its own fileLennart Poettering
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-24util-lib: split our string related calls from util.[ch] into its own file ↵Lennart Poettering
string-util.[ch] There are more than enough calls doing string manipulations to deserve its own files, hence do something about it. This patch also sorts the #include blocks of all files that needed to be updated, according to the sorting suggestions from CODING_STYLE. Since pretty much every file needs our string manipulation functions this effectively means that most files have sorted #include blocks now. Also touches a few unrelated include files.
2015-09-22util: add safe_closedir() similar to safe_fclose()Lennart Poettering
2015-09-11sysv-generator: follow symlinks in /etc/rc.d/init.dLukas Nykryn
Some java packages puts a symlink to init.d and its content is pointing to latest java installation (because you can have multiple javas on you machine). On rhel-based distributions you can use alternatives --initscript instread of symlink, but this is not usable for other distributions.
2015-07-01sysv-generator: fix coding-styleDavid Herrmann
Fix weird coding-style: - proper white-space - no if (func() >= 0) bail-outs - fix braces - avoid 'r' for anything but errno - init _cleanup_ variables unconditionally, even if not needed
2015-06-29sysv-generator: escape names when translating from sysv nameFelipe Sateler
While the LSB suggests only [A-Za-z0-9], that doesn't prevent admins from doing the wrong thing. Lets not generate invalid names in that case.
2015-06-29sysv-generator: detect invalid provided unit namesFelipe Sateler
Do not assume that a non-service unit type is a target.
2015-05-11core: rename SystemdRunningAs to ManagerRunningAsLennart Poettering
It's primarily just a property of the Manager object after all, and we try to refer to PID 1 as "manager" instead of "systemd", hence let's to stick to this here too.
2015-05-11core,network: major per-object logging reworkLennart Poettering
This changes log_unit_info() (and friends) to take a real Unit* object insted of just a unit name as parameter. The call will now prefix all logged messages with the unit name, thus allowing the unit name to be dropped from the various passed romat strings, simplifying invocations drastically, and unifying log output across messages. Also, UNIT= vs. USER_UNIT= is now derived from the Manager object attached to the Unit object, instead of getpid(). This has the benefit of correcting the field for --test runs. Also contains a couple of other logging improvements: - Drops a couple of strerror() invocations in favour of using %m. - Not only .mount units now warn if a symlinks exist for the mount point already, .automount units do that too, now. - A few invocations of log_struct() that didn't actually pass any additional structured data have been replaced by simpler invocations of log_unit_info() and friends. - For structured data a new LOG_UNIT_MESSAGE() macro has been added, that works like LOG_MESSAGE() but prefixes the message with the unit name. Similar, there's now LOG_LINK_MESSAGE() and LOG_NETDEV_MESSAGE(). - For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(), LOG_NETDEV_INTERFACE() macros have been added that generate the necessary per object fields. The old log_unit_struct() call has been removed in favour of these new macros used in raw log_struct() invocations. In addition to removing one more function call this allows generated structured log messages that contain two object fields, as necessary for example for network interfaces that are joined into another network interface, and whose messages shall be indexed by both. - The LOG_ERRNO() macro has been removed, in favour of log_struct_errno(). The latter has the benefit of ensuring that %m in format strings is properly resolved to the specified error number. - A number of logging messages have been converted to use log_unit_info() instead of log_info() - The client code in sysv-generator no longer #includes core code from src/core/. - log_unit_full_errno() has been removed, log_unit_full() instead takes an errno now, too. - log_unit_info(), log_link_info(), log_netdev_info() and friends, now avoid double evaluation of their parameters
2015-05-05core: rework unit name validation and manipulation logicLennart Poettering
A variety of changes: - Make sure all our calls distuingish OOM from other errors if OOM is not the only error possible. - Be much stricter when parsing escaped paths, do not accept trailing or leading escaped slashes. - Change unit validation to take a bit mask for allowing plain names, instance names or template names or an combination thereof. - Refuse manipulating invalid unit name
2015-04-26sysv-generator: avoid freeing uninitialized variableThomas Hindoe Paaboel Andersen
Would happen if lookup_paths_init returns an error.
2015-04-12sysv-generator: free memory allocated for service stubsZbigniew Jędrzejewski-Szmek
2015-04-12sysv-generator: always log on oomZbigniew Jędrzejewski-Szmek
This code appears to follow the following convention: - all errors are logged at point of origin - oom errors abort execution, non-oom errors are logged but execution continues. Make sure all ooms result in a log message, and remove warning which could not be reached. Downgrade non-fatal errors to warnings.
2015-04-12sysv-generator: split out two nested blocks into functionsZbigniew Jędrzejewski-Szmek
No functional change intended. Just splitting this out to make it easier to edit in the future.
2015-04-12sysv-generator: free LookupPaths also on errorZbigniew Jędrzejewski-Szmek
Followup for 7a03974a6f.
2015-04-11sysv-generator: fix mem leaksThomas Hindoe Paaboel Andersen
2015-03-14sysv-generator: initialize LookupPaths just onceZbigniew Jędrzejewski-Szmek
With debugging on, sysv-generator would print the full set of lookup paths for *every* sysv script. While at it, pass LookupPaths as a pointer in sysv-generator, and constify it everywhere.
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-02-19sysv-generator: fix wrong "Overwriting existing symlink" warningsMartin Pitt
Fix result testing of is_symlink() to ignore negative results, which happen if the file name does not exist at all. In this case we do not want a warning and unlink the non-existing link. https://bugs.debian.org/778700
2015-02-18everywhere: remove configurability of sysv runlevel to target mappingLennart Poettering
With this change runlevel 2, 3, 4 are mapped to multi-user.target for good, and 5 to graphical.target. This was already the previous mapping but is now no longer reconfigurable, but hard-coded into the core. This should generally simplify things, but also fix one bug: the sysv-generator previously generated symlinks to runlevel[2-5].target units, which possibly weren't picked up if these aliases were otherwise only referenced by the real names "multi-user.target" and "graphical.target". We keep compat aliases "runlevel[2345].target" arround for cases where this target name is explicitly requested.
2015-02-11sysv-generator: Skip init scripts for existing native servicesMartin Pitt
This avoids taking the SysV init script enablement state into account if we have native units. Otherwise systemctl disable on native unit would not be respected in the presence of an enabled SysV script. Also, there's no need to do all the parsing and creation of service files if we already have a native systemd unit for the processed SysV init script.
2015-01-28sysv-generator: no need to check for identical symlinks source and target twiceLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2015-January/027594.html
2015-01-28sysv-generator: Re-fix .sh suffix handlingMartin Pitt
Commit 4e48855534 caused the .sh suffix to be stripped from the original "filename", which caused the generated units to call the wrong init.d script. Only use the .sh stripped file name for comparing with Provides:, not for generating the Exec*= lines. Spotted by sysv-generator-test.
2015-01-28sysv-generator: there's really no need to invoke fstatat() multiple times on ↵Lennart Poettering
the same sysv script It's sufficient to check once if something is a regular file, hence, let's do that.
2015-01-27sysv-generator: use is_symlink() utility call where appropriateLennart Poettering
2015-01-27sysv-generator: minor simplificationsLennart Poettering
2015-01-22sysv-generator: only allow regular files in enumerate_sysv()Cristian Rodríguez
Otherwise, if the directory contains other directories we fail at fopen in load_sysv() with EISDIR.
2015-01-21sysv-generator: Replace Provides: symlinks with real unitsMartin Pitt
Since commit b7e7184 the SysV generator creates symlinks for all "Provides:" in the LSB header. However, this is too greedy; there are cases where the creation of a unit .service file fails because of an already existing symlink with the same name: - Backup files such as /etc/init.d/foo.bak still have "Provides: foo", and thus get a foo.service -> foo.bak.service link. foo.bak would not be enabled in rcN.d/, but we (deliberately) create units for all executables in init.d/ so that a manual "systemctl start" works. If foo.bak is processed before, the symlink already exists. - init.d/bar has "Provides: foo", while there also is a real init.d/foo. The former would create a link foo.service -> bar.service, while the latter would fail to create the real foo.service. If we encounter an existing symlink, just remove it before writing a real unit. Note that two init.d scripts "foo" and "bar" which both provide the same name "common" already work. The first processed init script wins and creates the "common.service" symlink, and the second just fails to create the symlink again. Thus create an additional test case for this to ensure that it keeps working sensibly. https://bugs.debian.org/775404
2015-01-21sysv-generator: Handle .sh suffixes when translating Provides:Martin Pitt
When deciding whether the provided name equals the file name in sysv_translate_facility(), also consider them equal if the file name has a ".sh" suffix. This was uncovered by commit b7e7184 which then created a symlink "<name>.service" to itself for ".sh" suffixed init.d scripts. For additional robustness, refuse to create symlinks to itself in add_alias(). Add test case which reproduces the bug. https://bugs.debian.org/775889
2015-01-14sysv-generator: always use fstatat() if we canLennart Poettering
2015-01-14sysv-generator: fix memory leak on failureLennart Poettering
This fixes a memory leak introduced by 1ed0c19f81fd13cdf283c6def0168ce122a853a9
2015-01-07sysv-generator: initialize units before use to ensure correct orderingMichael Biebl
The original loop called fix_order() on each service immediately after loading it, but fix_order() would reference other units which were not loaded yet. This resulted in bogus and unnecessary orderings based on the static start priorities. Therefore call load_sysv() for every init script when traversing them in enumerate_sysv(). This ensures that all units are loaded when fix_order() is called. Bug-Debian: https://bugs.debian.org/771118
2015-01-07sysv-generator: handle Provides: for non-virtual facility namesMichael Biebl
The list of provided facility names as specified via Provides: in the LSB header was originally implemented by adding those facilities to the Names= property via unit_add_name(). In commit 95ed3294c632f5606327149f10cef1eb34422862 the internal SysV support was replaced by a generator and support for parsing the Names= option had been removed from the unit file parsing in v186. As a result, Provides: for non-virtual facility was dropped when introducing the sysv-generator. Since quite a few SysV init scripts still use that functionality (at least in distros like Debian which have a large body of SysV init scripts), add back support by making those facility names available via symlinks to the unit filename to ensure correct orderings between SysV init scripts which use those facility names. Bug-Debian: https://bugs.debian.org/774335
2014-12-19sysv-generator: properly add Makefile symlinkLennart Poettering
2014-12-19util: rename ignore_file() to hidden_file()Lennart Poettering
hidden_file() is a bit more precise, since dot files usually shouldn't be ignored, but certainly be considered hidden.
2014-11-30core: warn and ignore SysVStartPriority=Zbigniew Jędrzejewski-Szmek
Option was being parsed but not used for anything.
2014-11-28treewide: another round of simplificationsMichal Schmidt
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno + return simplifications".
2014-11-28treewide: use log_*_errno whenever %m is in the format stringMichal Schmidt
If the format string contains %m, clearly errno must have a meaningful value, so we might as well use log_*_errno to have ERRNO= logged. Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/' Plus some whitespace, linewrap, and indent adjustments.
2014-11-28core: convert log_unit_*() to log_unit_*_errno()Michal Schmidt
Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_unit_(debug|info|notice|warning|error|emergency)\(([^"]+), "(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_unit_\1_errno(\2, \5, "\3%m"\4);/'
2014-11-27sysv-generator: advertise the man pageZbigniew Jędrzejewski-Szmek
2014-11-27log: rearrange log function namingLennart Poettering
- Rename log_meta() → log_internal(), to follow naming scheme of most other log functions that are usually invoked through macros, but never directly. - Rename log_info_object() to log_object_info(), simply because the object should be before any other parameters, to follow OO-style programming style.
2014-10-01Remove repeated includesThomas Hindoe Paaboel Andersen
In pty.c there was both an include of our pty.h and the system installed pty.h. The latter contains only two functions openpty and forkpty. We use neither so I assume it was a typo and removed it. We still compile and pass all tests.
2014-09-17sysv-generator: don't check first if hashmap contains the service nameThomas Hindoe Paaboel Andersen
Just test if hashmap_get returns null. hashmap_contains does exactly same thing internally so this is slightly more efficient for the true case. Silences a coverity warning too. CID#1237648