| Age | Commit message (Collapse) | Author |
|---|
|
Given two bitmaps and the following code:
Bitmap *a = bitmap_new(), *b = bitmap_new();
bitmap_set(a, 1);
bitmap_clear(a);
bitmap_set(a, 0);
bitmap_set(b, 0);
These two bitmaps should now have the same bits set and they should be
equal but bitmap_equal() will return false in this case because while
bitmap_clear() resets the number of elements in the array it does not
clear the array and bitmap_set() expects the array to be cleared.
GREEDY_REALLOC0 looks at the allocated size and not the actual size so
it does not clear any memory.
Fix this by freeing the allocated memory and resetting the whole Bitmap
to an initial state in bitmap_clear().
This also adds test code for this issue.
|
|
Given two bitmaps and the following code:
Bitmap *a = bitmap_new(), *b = bitmap_new();
bitmap_set(a, 0);
bitmap_unset(a, 0);
These two bitmaps should now have the same bits set and they should be
equal but bitmap_equal() will return false in this case because the
bitmaps array in a is larger because of the bit which was previously
set.
Fix this by comparing only the bits which exists in both bitmaps and
then check that the rest of the bits (if any) is all zero.
This also adds test code for this issue.
|
|
We already refuse to resolve "localhost", hence we should also refuse
resolving "127.0.0.1" and friends.
|
|
Given three DNS names this function indicates if the second argument lies
strictly between the first and the third according to the canonical DNS
name order. Note that the order is circular, so the last name is
considered to be before the first.
|
|
Intended to be called repeatedly, and returns then successive unescaped labels
from the most to the least significant (left to right).
This is slightly inefficient as it scans the string three times (two would be
sufficient): once to find the end of the string, once to find the beginning
of each label and lastly once to do the actual unescaping. The latter two
could be done in one go, but that seemed unnecessarily convoluted.
|
|
unquote_first_word: parse ` '' ` as an empty argument instead of no arg
|
|
|
|
The bug found by David existed in several places, fix them all. Also
extend the tests to cover these cases.
|
|
Reuse the Iterator object from hashmap.h and expose a similar API.
This allows us to do
{
Iterator i;
unsigned n;
BITMAP_FOREACH(n, b, i) {
Iterator j;
unsigned m;
BITMAP_FOREACH(m, b, j) {
...
}
}
}
without getting confused. Requested by David.
|
|
This implements more of RFC4648.
|
|
For when a Hashmap is overkill.
|
|
This implements RFC4648 for a slightly more compact representation of
binary data compared to hex (6 bits per character rather than 4).
|
|
We were ignoring failures from unhexchar, which meant that invalid
hex characters were being turned into garbage rather than the string
rejected.
Fix this by making unhexmem return an error code, also change the API
slightly, to return the size of the returned memory, reflecting the
fact that the memory is a binary blob,and not a string.
For convenience, still append a trailing NULL byte to the returned
memory (not included in the returned size), allowing callers to
treat it as a string without doing a second copy.
|
|
fileio: consolidate write_string_file*()
|
|
|
|
Merge write_string_file(), write_string_file_no_create() and
write_string_file_atomic() into write_string_file() and provide a flags mask
that allows combinations of atomic writing, newline appending and automatic
file creation. Change all users accordingly.
|
|
Add a flag to control whether write_string_stream() should always enforce a
trailing newline character in the file.
|
|
|
|
a tiny hashmap cleanup
|
|
The test-barrier binary uses real-time alarms and timeouts to test for
races in the thread-barrier implementation. Hence, if your system is under
high load and your scheduler decides to not run test-barrier for
>BASE_TIME, then the tests are likely to fail.
Two options:
1) Increase BASE_TIME. This will make the test take significantly longer
for no real good. Furthermore, it is still not guaranteed that the
task is scheduled.
2) Don't rely on real-time timers, but use explicit synchronization. This
would basically test one barrier implementation with another.. kinda
ironic.. but maybe something worth looking into.
3) Disable test-barrier by default.
This patch chooses option 3) and makes sure test-barrier only runs if you
pass any argument.
Side note:
test-barrier is written in a way that if it fails under load, but
does not on idle systems, then it is very _unlikely_ that the
barrier implementation is the culprit. Hence, it makes little
sense to run it under load, anyway. It will not improve the test
coverage of barrier.c, but rather the coverage of the test itself.
|
|
This is consistent with how an empty string works in an ExecStart=
statement. We should not differentiate between an empty string and
whitespace only (since they look the same.)
Update the test case with whitespace only to reflect that the list is
reset.
Tested that `test-unit-file` passes and other test cases are not
affected. Installed the patched systemd binaries on a machine, booted
it, looked for out of the usual behavior but did not find any.
|
|
Convert config_parse_exec() from using FOREACH_WORD_QUOTED into a loop
of unquote_first_word.
Loop through the arguments only once (the FOREACH_WORD_QUOTED
implementation did it twice, once to count them and another time to
process and store them.)
Use newly introduced flag UNQUOTE_UNESCAPE_RELAX to preserve
unrecognized escape sequences such as regexps matches such as "\w",
"\d", etc. (Valid escape sequences such as "\s" or "\b" still need an
extra backslash if literals are desired for regexps.)
Differences in behavior:
- Handle ; (command separator) in special, so that only ; on its own is
valid for that purpose, an quoted semicolon ";" or ';' will now behave
as a literal semicolon. This is probably what was initially intended.
- Handle \; (to introduce a literal semicolon) in special, so that only \;
is turned into a semicolon but not \\; or "\\;" or "\;" which are kept
as a literal \; in the output. This is probably what was initially
intended.
Known issues:
- Using an empty string (for example, ExecStartPre=<empty>) will empty
the list and remove the existing commands, but using whitespace only
(for example, ExecStartPre=<spaces>) will not. This is a pre-existing
issue and will be dealt with in a follow up commit.
Tested:
- Unit tests passing. Also `make distcheck` still works as expected.
- Installed it on a local machine and booted with it, checked console
output, systemctl and journalctl output, did not notice any issues
running the patched systemd binaries.
Relevant bug: https://bugs.freedesktop.org/show_bug.cgi?id=90794
|
|
These tests will be useful to check the cases regarding quoted and
escaped semicolon when we switch to using unquote_first_word.
Additionally, convert some of the tests that have semicolons so that the
argument after the semicolon looks like a path (starts with /) so that
we can see the change of behavior when making config_parse_exec more
strict about what it accepts as a command separator.
|
|
It will try to unquot_first_word, but if it runs into escaping problems
it will retry it adding UNQUOTE_CUNESCAPE_RELAX to the flags. If it
succeeds on the second try, it will log a warning about it. If it fails
both times, it will log an error.
Add test cases to confirm it behaves as expected.
|
|
The new flag UNQUOTE_UNESCAPE_RELAX preserves unrecognized escape
sequences verbatim in unquote_first_word, either when it's a trailing
backslash (similar to UNQUOTE_RELAX, but in this case keep the extra
backslash in the output) or in the middle of a sequence string.
Add unit test cases to ensure the new flag works as expected and to
prevent regressions from being introduced.
Tested with a follow up commit converting config_parse_exec() to start
using unquote_first_word, in which case this flags makes it possible to
preserve unrecognized escape sequences.
Relevant bug: https://bugs.freedesktop.org/show_bug.cgi?id=90794
|
|
There is no reason to require key to be non-NULL.
Change test_ordered_hashmap_next() to use trivial_hash_ops in order to
test NULL key too.
|
|
test-cgroup-mask: unit_get_sibling_mask ignores cgroup_supported
|
|
hashmap: fix iterators to not skip entries
|
|
everywhere: port everything to sigprocmask_many() and friends
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
This adds a "char *extra" parameter to tempfn_xxxxxx(), tempfn_random(),
tempfn_ranomd_child(). If non-NULL this string is included in the middle
of the newly created file name. This is useful for being able to
distuingish the kind of temporary file when we see one.
This also adds tests for the three call.
For now, we don't make use of this at all, but port all users over.
|
|
The names fw-util.[ch] are too ambiguous, better rename the files to
firewall-util.[ch]. Also rename the test accordingly.
|
|
Currently, the HASHMAP iterators stop at the first NULL entry in a
hashmap. This is non-obvious and breaks users like sd-device, which
legitimately store NULL values in a hashmap.
Fix all the iterators by taking a pointer to the value storage, instead of
returning it. The iterators now return a boolean that tells whether the
end of the list was reached.
Current users of HASHMAP_FOREACH() are *NOT* changed to explicitly check
for NULL. If it turns out, there were users that inserted NULL into
hashmaps, but didn't properly check for it during iteration, then we
really want to find those and fix them.
|
|
No functional change, but looked weird.
|
|
|
|
The result of unit_get_sibling_mask returns bits for the sibling cgroups
even if they are not supported in the local system.
I caught this on a machine where my kernel was misconfigured with
CONFIG_MEMCG unset, but the rest of the cgroup infrastructure enabled.
Tested with `make check` on a host running a kernel where CONFIG_MEMCG
is not set.
|
|
|
|
shared: Drop 'name=' prefix from SYSTEMD_CGROUP_CONTROLLER define.
|
|
|
|
|
|
When we have a structure like this:
/bin -> /usr/bin
/usr is a mount point
Then path_is_mount_point("/bin", AT_SYMLINK_FOLLOW) needs to look at the pair
/usr/bin and /usr, not at the pair / and /usr/bin, as the latter have different
mount IDs. But we only want to consider the base name, not any parent.
Thus we have to resolve the given path first to get the real parent when
allowing symlinks.
Bug: https://github.com/systemd/systemd/issues/61
|
|
|
|
|
|
Fix a regression caused by 4034a06d ("util: rework word parsing and c
unescaping code") which broke octal escape sequences.
The reason for this breakage is that cunescape_one() expects 4 characters
in an octal encoding, which is a stray left-over from the old code which
operated on different variables to make the length check.
While at it, add a test case to prevent the same thing from happening
again.
|
|
We used to block all signals, and restore the original signal mask before exec'ing
external processes.
Now we just block the signals we care about and unconditionally unblock all signals
before exec'ing.
|
|
In cgtop,mount-setup,nspawn the name= prefix is hard-coded in the
mount options, and the define is not used.
Everywhere else, we explicitly white-list allow 'name=' prefix to be
used with all controllers, and strip it out to 'normalise' the
controller name. That work is mostly inflicted on us due to 'name='
prefix in the define. Dropping this prefix makes everything more sane
overall.
|
|
Add a regression test for the recent breakage of handling improperly
escaped exec strings in unit files.
Code contributed by Martin Pitt:
https://bugs.freedesktop.org/show_bug.cgi?id=90794
|
|
add tests for the following functions:
- fdset_new_array
- fdset_steal_first
- fdset_isempty
|
|
|
|
No functional changes.
|
