| Age | Commit message (Collapse) | Author |
|---|
|
whether it is a command or a daemon
SIGTERM should be considered a clean exit code for daemons (i.e. long-running
processes, as a daemon without SIGTERM handler may be shut down without issues
via SIGTERM still) while it should not be considered a clean exit code for
commands (i.e. short-running processes).
Let's add two different clean checking modes for this, and use the right one at
the appropriate places.
Fixes: #4275
|
|
but also on all other consoles. This does help on e.g. mainframes
where often a serial console together with other consoles are
used. Even rack based servers attachted to both a serial console
as well as having a virtual console do sometimes miss a connected
monitor.
To be able to ask on all terminal devices of /dev/console the devices
are collected. If more than one device are found, then on each of the
terminals a inquiring task for passphrase is forked and do not return
to the caller.
Every task has its own session and its own controlling terminal.
If one of the tasks does handle a password, the remaining tasks
will be terminated.
Also let contradictory options on the command of
systemd-tty-ask-password-agent fail.
Spwan for each device of the system console /dev/console a own process.
Replace the system call wait() with with system call waitid().
Use SIGTERM instead of SIGHUP to get unresponsive childs down.
Port the collect_consoles() function forward to a pulbic and strv
based function "get_kernel_consoles()" in terminal-util.c and use this
in tty-ask-password-agent.c.
|
|
The macro determines the right length of a AF_UNIX "struct sockaddr_un" to pass to
connect() or bind(). It automatically figures out if the socket refers to an
abstract namespace socket, or a socket in the file system, and properly handles
the full length of the path field.
This macro is not only safer, but also simpler to use, than the usual
offsetof() + strlen() logic.
|
|
In standard linux parlance, "hidden" usually means that the file name starts
with ".", and nothing else. Rename the function to convey what the function does
better to casual readers.
Stop exposing hidden_file_allow_backup which is rather ugly and rewrite
hidden_file to extract the suffix first. Note that hidden_file_allow_backup
excluded files with "~" at the end, which is quite confusing. Let's get
rid of it before it gets used in the wrong place.
|
|
tty-ask-password: Split out password sending
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
This is a piece of refactoring I've done while looking for a solution to bug #2378.
It separates the password sending from `parse_password`, which only needs to know
about the socket path and the list of passwords to send.
As a caveat, the `ask_password_tty` path needs to construct a one-password strv, too.
|
|
|
|
|
|
Also, move a couple of more path-related functions to path-util.c.
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
|
|
A bit snake-oilish, but can't hurt.
|
|
calling tty
For example, due to perm issues.
THis simply downgrades the message about it, since this is purely
cosmetical anyway.
Fixes #1543.
|
|
Before, we'd always reset acquired terminals, which is not really
desired, as we expose a setting TTYReset= which is supposed to control
whether the TTY is reset or not. Previously that setting would only
enable a second resetting of the TTY, which is of course pointless...
Hence, move the implicit resetting out of acquire_terminal() and make
the callers do it if they need it.
|
|
This adds support for caching harddisk passwords in the kernel keyring
if it is available, thus supporting caching without Plymouth being
around.
This is also useful for hooking up "gdm-auto-login" with the collected
boot-time harddisk password, in order to support gnome keyring
passphrase unlocking via the HDD password, if it is the same.
Any passwords added to the kernel keyring this way have a timeout of
2.5min at which time they are purged from the kernel.
|
|
Primarily clean-up error logging: log either all or no error messages in
the various functions. Mostly this means the actual password querying
calls no longer will log on their own, but the callers have to do so.
Contains various other fixes too, for example ports some code over to
use the clean-up macro.
Should contain no functional changes.
|
|
Also add a Coccinell patch to detect such locations in the future.
|
|
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
No functional changes.
|
|
Instead of looking up the tty from STDIN, let utmp_wall() take an argument
to specify an origin tty for the wall message. Only if that argument is
NULL do the STDIN lookup.
Also add an void *userdata argument that is handed back to the callback
function.
|
|
|
|
|
|
include-what-you-use automatically does this and it makes finding
unnecessary harder to spot. The only content of poll.h is a include
of sys/poll.h so should be harmless.
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
hidden_file() is a bit more precise, since dot files usually shouldn't
be ignored, but certainly be considered hidden.
|
|
loop_write() didn't follow the usual systemd rules and returned status
partially in errno and required extensive checks from callers. Some of
the callers dealt with this properly, but many did not, treating
partial writes as successful. Simplify things by conforming to usual rules.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
Programs such as OpenVPN may use ask-password for not only retrieving
passwords, but also usernames. Masking usernames with * seems just silly.
v2 - Don't mess with termios flags, instead print the input
instead of an asterix. Resolves issues with backspace
and TAB input.
v3 - Renamed 'do_echo' variables and argument to 'echo'. Also
modified the ask_password_{tty,agent,auto} API instead of
additional wrapper functions.
[zj: undo changes to ask_password_auto, since no callers were using
the new argument.]
|
|
|
|
|
|
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
|
|
|
|
There is a small number of the places in sources where we don't check
asprintf() return code and assume that after error the function
returns NULL pointer via the first argument. That's wrong, after
error the content of pointer is undefined.
|
|
|
|
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
|
|
|
|
|
|
Return negative errno in wall_tty_block(). get_ctty_devnr() already
returns a negative errno in case of failure, no need to negate it again.
Reported-by: Simon <hwold@odai.homelinux.net>
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
utmp_wall() now takes an optional argument 'username_override' which
allows the caller to override the username shown on wall messages.
journald will use this to inform users that its wall messages comes from
'systemd-journald'.
|
