Age | Commit message (Collapse) | Author |
|
|
|
Some events take longer than the default 30 seconds. Killing those
events will leave the machine halfway configured.
Add a commandline option '--event-timeout' to handle these cases.
|
|
MD instantiates devices at open(). This is incomptible with the
locking logic, as the "change" event emitted when stopping a
device will bring it back.
|
|
If we want to avoid reading a totally empty file, it seems better
to check after we have opened the file, not before.
|
|
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
|
|
|
|
Instead of waiting for new data from the sensor, which might be
a long time coming, depending on the sensor device, ask the kernel
for the last state for that particular input device.
|
|
Otherwis, we get misleading error messages on links with MACs.
Reported by Leonid Isaev.
|
|
|
|
Let's tell users what is going wrong.
|
|
For network devices on the same PCI function, dev_id should not be used,
since its purpose is for IPv6 support on interfaces with the same MAC
address.
The new dev_port sysfs attribute should be used instead of dev_id.
|
|
descriptor
|
|
|
|
static bool enable_name_policy(...) in ./src/udev/net/link-config.c
calls proc_cmdline(...) to get "line" initialized, but
proc_cmdline(...) does not guarantee that atleast when both
conditions (detect_container(NULL) > 0) and
read_full_file(...) returned < 0.
|
|
The return value from udev_enumerate_scan_devices was stored but
never used. I assume this was meant to be checked.
|
|
Arguments were wrong order, no?
This fixes commits:
e918a1b5a94f270186dca59156354acd2a596494
3d06f4183470d42361303086ed9dedd29c0ffc1b
|
|
|
|
The kernel will return 0 for REREADPT when no partition table
is found, we have to send out "change" ourselves.
|
|
|
|
mounted partitions:
# dd if=/dev/zero of=/dev/sda bs=1 count=1
UDEV [4157.369250] change .../0:0:0:0/block/sda (block)
UDEV [4157.375059] change .../0:0:0:0/block/sda/sda1 (block)
UDEV [4157.397088] change .../0:0:0:0/block/sda/sda2 (block)
UDEV [4157.404842] change .../0:0:0:0/block/sda/sda4 (block)
unmounted partitions:
# dd if=/dev/zero of=/dev/sdb bs=1 count=1
UDEV [4163.450217] remove .../target6:0:0/6:0:0:0/block/sdb/sdb1 (block)
UDEV [4163.593167] change .../target6:0:0/6:0:0:0/block/sdb (block)
UDEV [4163.713982] add .../target6:0:0/6:0:0:0/block/sdb/sdb1 (block)
|
|
Reported by Kay.
|
|
This should make sure that fdisk-like programs will automatically
cause an update of all partitions, just like mkfs-like programs cause
an update of the partition.
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=79576
|
|
I am getting
"Error calling EVIOCSKEYCODE (scan code 0xc022d, key code 418): Invalid
argument", the error message does not tell on which specific device the
problem is, add that info.
|
|
If the udev queue is empty and "/run/udev/queue" does not exist,
"udevadm settle" would return with EXIT_FAILURE, because the inotify on
"/run/udev/queue" would fail with ENOENT.
This patch lets "udevadm settle" exit with EXIT_SUCCESS in this case.
|
|
After 1ea972174baba40dbc80c51cbfc4edc49764b59b err is no longer
set unless we hit a special case. Initialize it to 0 and remove
a check that will never fail.
|
|
No functional change expected :)
|
|
|
|
Before:
30,997,4553484,-;systemd-udevd[439]: renamed network interface wwan0 to wwp0s20u4i6systemd-udevd[439]: renamed network interface wlan0 to wlp3s0
30,998,1175077801,c;systemd-udevd[2345]: renamed network interface wwan0 to wwp0s20u4i6
After:
30,834,4553484,-;systemd-udevd[439]: renamed network interface wwan0 to wwp0s20u4i6
30,835,4732949,-;systemd-udevd[439]: renamed network interface wlan0 to wlp3s0
30,988,1175077801,-;systemd-udevd[2345]: renamed network interface wwan0 to wwp0s20u4i6
|
|
Under some conditions, in udev_rules_apply_to_event the fact that
result is 1024 bytes, creates problems if the output of the running
command/app is bigger then 1024 bytes.
|
|
|
|
The address may be already changed by other processes, or set
when creating the netdev from userspace.
|
|
|
|
This essentially swaps the roles of rtnl and udev in networkd. After this
change libudev is only used for waiting for udev to initialize devices and
to get udev-specific information needed for some [Match] attributes.
This in particular simplifies the code in containers where udev is not really
useful, but also simplifies things and reduces round-trips in the non-container
case.
|
|
|
|
The way the kernel namespaces have been implemented breaks assumptions
udev made regarding uevent sequence numbers. Creating devices in a
namespace "steals" uevents and its sequence numbers from the host. It
confuses the "udevadmin settle" logic, which might block until util a
timeout is reached, even when no uevent is pending.
Remove any assumptions about sequence numbers and deprecate libudev's
API exposing these numbers; none of that can reliably be used anymore
when namespaces are involved.
|
|
|
|
|
|
|
|
This reverts commit 8741f2defaf26aafe5ee0fd29954cfdf84ee519c: 'Add virtio-blk support to path_id' and
commit e3d563346c4237af23335cc6904e0662efdf62ad: 'udev: net_id - handle virtio buses'.
Distros may want to take note of this, as it changes behavior.
|
|
|
|
This does not belong in shared as it is mostly a detail of our networking subsystem.
Moreover, now we can use libudev here, which will simplify things.
|
|
Increase the chance of using the same link local address between reboots. The
pseudo random sequence of addresses we attempt is now seeded with data that is
very likely to stay the same between reboots, but at the same time be unique
to the specific machine/nic.
First we try to use the ID_NET_NAME_* data from the udev db combined with the
machin-id, which is guaranteed to be unique and persistent, if available. If
that is not possible (e.g., in containers where we don't have access to the
udev db) we fallback to using the MAC address of the interface, which is
guaranteed to be unique, and likely to be persistent.
[tomegun: three minor changes:
- don't expose HASH_KEY in the siphash24 header
- get rid of some compile-warnings (and some casts at the same time),
by using uint8_t[8] rather than uint64_t in the api
- added commit message]
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
|
|
GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity. In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.
|
|
|
|
Input devices like rudders or pedals are joystick-like; they don't have
buttons, but axes like RX, THROTTLE, or RUDDER. These don't interfere with
other device types with absolute axes (touch screens, touchpads, and
accelerometers), so it's fairly safe to mark them as ID_INPUT_JOYSTICK and thus
hand out dynamic ACLs to the user.
https://bugs.freedesktop.org/show_bug.cgi?id=70734
|