| Age | Commit message (Collapse) | Author |
|---|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
|
|
GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity. In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.
|
|
|
|
Input devices like rudders or pedals are joystick-like; they don't have
buttons, but axes like RX, THROTTLE, or RUDDER. These don't interfere with
other device types with absolute axes (touch screens, touchpads, and
accelerometers), so it's fairly safe to mark them as ID_INPUT_JOYSTICK and thus
hand out dynamic ACLs to the user.
https://bugs.freedesktop.org/show_bug.cgi?id=70734
|
|
Bring some arrays that are used for DEFINE_STRING_TABLE_LOOKUP() in the
same order than the enums they reference.
Also, pass the corresponding _MAX value to the array initalizer where
appropriate.
|
|
|
|
there's a suitable root partition
|
|
same disk as the ESP, expose a property on the udev device
This is preparation for a logic to automatically discover the root
partition to boot from if no partition has been configured explicitly.
This makes use of our newly defined GPT type GUIDs for our root disks:
#define GPT_ROOT_X86 SD_ID128_MAKE(44,47,95,40,f2,97,41,b2,9a,f7,d1,31,d5,f0,45,8a)
#define GPT_ROOT_X86_64 SD_ID128_MAKE(4f,68,bc,e3,e8,cd,4d,b1,96,e7,fb,ca,f9,84,b7,09)
We define differen GUIDs for different architectures to allow images
which finde the right root partition for the appropriate arch.
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1038015
The problem seems to be that the your virtual DVD is emulating a really
old DVD device, and doing it kind of strangely.
> dracut:# /lib/udev/cdrom_id --debug /dev/sr0
> probing: '/dev/sr0'
> INQUIRY: [IMM ][Virtual CD/DVD ][0316]
> GET CONFIGURATION failed with SK=5h/ASC=24h/ACQ=00h
So your virtual drive rejects the GET CONFIGURATION command as illegal.
Other pre-MMC2 drives that don't accept this command usually return the
error
SK=5h,ASC=20h (invalid/unsupported command code), in which case cdrom_id
tries an older method, and then ID_CDROM_MEDIA_TRACK_COUNT_DATA gets set
and all the /dev/disk/by-label (etc) links get set up.
The virtual drive returns the error SK=5h,ASC=24h (invalid field in
Command Descriptor Block), which cdrom_id doesn't handle, so it gives up
and the links never get made.
The ideal solution would be to make the IMM to emulate a device that's
less than 15 years old, but I'm not going to hold my breath waiting for
that.
So probably cdrom_id should also use the old MMC fallback when the error
is SK=5h,ASC=24h, and then all of this would work as expected.
Suggested-by:Luca Miccini <lmiccini@redhat.com>
|
|
As pointed-out by clang -Wunreachable-code.
No behaviour changes.
|
|
for sizes
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
|
|
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice
that the speed was mistakenly documented to be in bytes before this change.
|
|
Also fix a copy-paste error that broke matching on interface name.
|
|
|
|
Just two minor style fixes...
|
|
This is the same as shown by 'ethtool -i <ifname>', and is sometimes
set even though DRIVER is not.
|
|
|
|
|
|
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
|
|
If -flto is used then gcc will generate a lot more warnings than before,
among them a number of use-without-initialization warnings. Most of them
without are false positives, but let's make them go away, because it
doesn't really matter.
|
|
It should match on the driver of the parent device.
|
|
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
|
|
|
|
The "sd_" prefix is supposed to be used on exported symbols only, and
not in the middle of names. Let's drop it from the cleanup macros hence,
to make things simpler.
The bus cleanup macros don't carry the "sd_" either, so this brings the
APIs a bit nearer.
|
|
Use PID_FMT/USEC_FMT/... in more places.
Also update logind error messages to print the full path to a file that
failed. This should make debugging easier for people who do not know
off the top of their head where logind stores it state.
|
|
In trying to track down a stupid linker bug, I noticed a bunch of
memset() calls that should be using memzero() to make it more "obvious"
that the options are correct (i.e. 0 is not the length, but the data to
set). So fix up all current calls to memset(foo, 0, length) to
memzero(foo, length).
|
|
The nodes usually do not exist, so handle the next item instead of
skipping the entire rule.
|
|
Use the bus-ID to create predicatable devices names for network interfaces
on Linux on System z instances. The bus-ID identifies a device in the s390
channel subsystem.
Network interfaces of device type Ethernet are named as:
enccw0.0.1234 (13 characters)
up to
enccwff.7.ffff (14 characters)
CTC network devices of device type SLIP, use a different prefix as follows:
slccw0.0.1234 (13 characters)
See also Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=870859
[tomegun: typical problem of netdevs switching names between reboots.]
|
|
|
|
This was already supported in path_id, so should be uncontroversial.
|
|
|
|
|
|
including it in the log strings
|
|
Introduce new call getpeercred() which internally just uses SO_PEERCRED
but checks if the returned data is actually useful due to namespace
quirks.
|
|
SipHash appears to be the new gold standard for hashing smaller strings
for hashtables these days, so let's make use of it.
|
|
|
|
Also clean things up a bit here and there.
|
|
Remove -i option which would case exit(1) to happen.
Remove some unused code.
Convert to bool where appropriate.
Simplify things a bit.
Always free everything.
https://bugzilla.redhat.com/show_bug.cgi?id=1043304
|
|
also define noreturn w/o <stdnoreturn.h>
|
|
|
|
Since numbers involved are all small, behaviour was correct already.
https://bugzilla.redhat.com/show_bug.cgi?id=1043304
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1043304
|
|
|
