summaryrefslogtreecommitdiff
path: root/src/udev
AgeCommit message (Collapse)Author
2014-02-24Remove dead lines in various placesZbigniew Jędrzejewski-Szmek
As pointed-out by clang -Wunreachable-code. No behaviour changes.
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-02-22udev: net - allow MTU and Speed to be specified with unitsTom Gundersen
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice that the speed was mistakenly documented to be in bytes before this change.
2014-02-21net-util: match on the driver as exposed by ethtool if DRIVER not setTom Gundersen
Also fix a copy-paste error that broke matching on interface name.
2014-02-21net: initialize structs when declaringTom Gundersen
2014-02-21net: initialize structs when declaring them/do not clobber caller variablesLennart Poettering
Just two minor style fixes...
2014-02-21udev - link-setup - expose ID_NET_DRIVERTom Gundersen
This is the same as shown by 'ethtool -i <ifname>', and is sometimes set even though DRIVER is not.
2014-02-21.network/.netdev/.link: allow to match on architectureTom Gundersen
2014-02-20network/link: Match - filter on kernel cmdline, host and virtTom Gundersen
2014-02-20macro: introduce a nice macro for disabling -Wformat-nonliteral temporarilyLennart Poettering
2014-02-20api: in constructor function calls, always put the returned object pointer ↵Lennart Poettering
first (or second) Previously the returned object of constructor functions where sometimes returned as last, sometimes as first and sometimes as second parameter. Let's clean this up a bit. Here are the new rules: 1. The object the new object is derived from is put first, if there is any 2. The object we are creating will be returned in the next arguments 3. This is followed by any additional arguments Rationale: For functions that operate on an object we always put that object first. Constructors should probably not be too different in this regard. Also, if the additional parameters might want to use varargs which suggests to put them last. Note that this new scheme only applies to constructor functions, not to all other functions. We do give a lot of freedom for those. Note that this commit only changes the order of the new functions we added, for old ones we accept the wrong order and leave it like that.
2014-02-19udev: net-config - allow interface names to be set from the hwdbTom Gundersen
2014-02-19udev: make sure we always return a valid error code in trie_store()Lennart Poettering
2014-02-19make gcc shut upLennart Poettering
If -flto is used then gcc will generate a lot more warnings than before, among them a number of use-without-initialization warnings. Most of them without are false positives, but let's make them go away, because it doesn't really matter.
2014-02-18net-match: fix Driver= matchTom Gundersen
It should match on the driver of the parent device.
2014-02-17Remove unused variable and two function stubsZbigniew Jędrzejewski-Szmek
2014-02-17doc: update punctuationJan Engelhardt
Resolve spotted issues related to missing or extraneous commas, dashes.
2014-02-13everywhere: always use O_CLOEXEC where it makes senseLennart Poettering
2014-02-13everywhere: make use of new0() and macro() macros, and stop using perror()Lennart Poettering
2014-02-13rtnl: drop "sd_" prefix from cleanup macrosLennart Poettering
The "sd_" prefix is supposed to be used on exported symbols only, and not in the middle of names. Let's drop it from the cleanup macros hence, to make things simpler. The bus cleanup macros don't carry the "sd_" either, so this brings the APIs a bit nearer.
2014-02-05Update some message formatsZbigniew Jędrzejewski-Szmek
Use PID_FMT/USEC_FMT/... in more places. Also update logind error messages to print the full path to a file that failed. This should make debugging easier for people who do not know off the top of their head where logind stores it state.
2014-01-31use memzero(foo, length); for all memset(foo, 0, length); callsGreg KH
In trying to track down a stupid linker bug, I noticed a bunch of memset() calls that should be using memzero() to make it more "obvious" that the options are correct (i.e. 0 is not the length, but the data to set). So fix up all current calls to memset(foo, 0, length) to memzero(foo, length).
2014-01-22udev: static_node - do not exit rule after first static_node itemKay Sievers
The nodes usually do not exist, so handle the next item instead of skipping the entire rule.
2014-01-11udev/net_id: Introduce predictable network names for Linux on System zHendrik Brueckner
Use the bus-ID to create predicatable devices names for network interfaces on Linux on System z instances. The bus-ID identifies a device in the s390 channel subsystem. Network interfaces of device type Ethernet are named as: enccw0.0.1234 (13 characters) up to enccwff.7.ffff (14 characters) CTC network devices of device type SLIP, use a different prefix as follows: slccw0.0.1234 (13 characters) See also Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=870859 [tomegun: typical problem of netdevs switching names between reboots.]
2014-01-08No need to canonicalize fixed pathsZbigniew Jędrzejewski-Szmek
2014-01-04udev: net_id - handle virtio busesTom Gundersen
This was already supported in path_id, so should be uncontroversial.
2013-12-29udev: LOG_PRIORITY -> LOG_LEVELKay Sievers
2013-12-26systemctl: allow globbing in commands which take multiple unit namesZbigniew Jędrzejewski-Szmek
2013-12-24log: log_error() and friends add a newline after each line anyway, so avoid ↵Lennart Poettering
including it in the log strings
2013-12-24util: unify SO_PEERCRED/SO_PEERSEC invocationsLennart Poettering
Introduce new call getpeercred() which internally just uses SO_PEERCRED but checks if the returned data is actually useful due to namespace quirks.
2013-12-22shared: switch our hash table implementation over to SipHashLennart Poettering
SipHash appears to be the new gold standard for hashing smaller strings for hashtables these days, so let's make use of it.
2013-12-18udevadm: modernizationZbigniew Jędrzejewski-Szmek
2013-12-18udevadm,scsi_id: add short options to help strings and to the man pageZbigniew Jędrzejewski-Szmek
Also clean things up a bit here and there.
2013-12-18scsi_id: cleanupZbigniew Jędrzejewski-Szmek
Remove -i option which would case exit(1) to happen. Remove some unused code. Convert to bool where appropriate. Simplify things a bit. Always free everything. https://bugzilla.redhat.com/show_bug.cgi?id=1043304
2013-12-17_noreturn_ --> noreturn for C11 compatShawn Landden
also define noreturn w/o <stdnoreturn.h>
2013-12-17udev link-config: add asserts to silence scan-buildThomas Hindoe Paaboel Andersen
2013-12-15Fix a few signed/unsigned format string issuesZbigniew Jędrzejewski-Szmek
Since numbers involved are all small, behaviour was correct already. https://bugzilla.redhat.com/show_bug.cgi?id=1043304
2013-12-15Fix a few resource leaks in error pathsZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1043304
2013-12-14udev-builtin-path: fix printf specifiersZbigniew Jędrzejewski-Szmek
2013-12-14Add more _printf_'s for format-nonliteralsThomas Hindoe Paaboel Andersen
Clang is a bit more strict wrt format-nonliterals: http://clang.llvm.org/docs/LanguageExtensions.html#format-string-checking Adding these extra printf attributes also makes gcc able to find more problems. E.g. this patch uncovers a format issue in udev-builtin-path_id.c Some parts looked intetional about breaking the format-nonliteral check. I added some supression for warnings there.
2013-12-03trivial coding style clean upsThomas Hindoe Paaboel Andersen
- Add space between if/for and the opening parentheses - Place the opening brace on same line as the function (not for udev) From the CODING_STYLE Try to use this: void foo() { } instead of this: void foo() { }
2013-11-28Revert "link-config: match length for kernel commandline option"Tom Gundersen
This reverts commit da66338e17f4df04d9d7cc22ec971b416d57761e. It is superseeded by 70f75a523b16ad495a7791d595ee3eececf75953
2013-11-26tree-wide usage of %m specifier instead of strerror(errno)Daniel Buch
Also for log_error() except where a specific error is specified e.g. errno ? strerror(errno) : "Some user specified message"
2013-11-25conf-parser: distinguish between multiple sections with the same nameTom Gundersen
Pass on the line on which a section was decleared to the parsers, so they can distinguish between multiple sections (if they chose to). Currently no parsers take advantage of this, but a follow-up patch will do that to distinguish [Address] Address=192.168.0.1/24 Label=one [Address] Address=192.168.0.2/24 Label=two from [Address] Address=192.168.0.1/24 Label=one Address=192.168.0.2/24 Label=two
2013-11-25udev-builtin-keyboard: More useful error messageMartin Pitt
Make the "Error calling EVIOCSKEYCODE" error message more useful by mentioning which scan/key code it tried to set.
2013-11-25udev: net_setup_link - don't use Description as AliasTom Gundersen
Use Description only internally, and allow Alias to be set as a separate option. For instance SNMP uses ifalias for a specific purpose, so let's not write to it by default.
2013-11-18Remove duplicate includesKarel Zak
2013-11-13udev: declare some symbols staticKay Sievers
2013-11-12udev: declare some symbols staticKay Sievers
2013-11-08Remove dead code and unexport some callsLennart Poettering
"make check-api-unused" informs us about code that is not used anymore or that is exported but only used internally. Fix these all over the place.