| Age | Commit message (Collapse) | Author |
|---|
|
At present, devices implementing the BTN_DPAD_UP/DOWN/LEFT/RIGHT
codes will be incorrectly classified as key devices. This causes
devices respecting the Linux gamepad spec (such as the DS3 as of
kernel 4.12) to be classified as keyboards by X11.
This is caused by the test_key function checking all codes on
[KEY_OK, BTN_TRIGGER_HAPPY). Unfortunately the BTN_DPAD_* codes
are placed between KEY_LIGHTS_TOGGLE and KEY_ALS_TOGGLE. This
patch splits the upper key block check into the block before and
after the BTN_DPAD_* codes. An array is used to avoid dedicated,
per block loops in the event that more event codes are added in
the future.
|
|
Move busctl to its own dir and other cleanups
|
|
This makes it easier to use the same generator script as for other
gperf scripts. With automake each gperf file had it's own rule, but
with meson I'm trying to use one script, and this inconsistency made
that harder.
|
|
We defined both $(VERSION) and $(PACKAGE_VERSION) with the same contents.
$(PACKAGE_VERSION) is slightly more descriptive, so settle on that, and
drop the other define.
|
|
For IBM PowerVM Virtual I/O network devices, we can build predictable names
based on the slot number passed as part of the OF "reg" property. Valid slot
numbers range between 2-32767, so we only need the bottom half of the unit
address passed.
For example:
/proc/device-tree/vdevice/l-lan@30000002
/proc/device-tree/vdevice/vnic@30000005
would initially map to something like:
/sys/devices/vio/30000002/net/eth0
/sys/devices/vio/30000005/net/eth1
and would then translate to env2 and env5
This patch ignores the bus number, as there should only ever be one bus, and
then remove leading zeros.
|
|
The builtin path id for virtio block devices has been changed
to use the bus id without a prefix "virtio-pci" to be
compatible with all virtio transport types.
In order to not break existing setups, the by-path symlinks for
virtio block devices on the PCI bus are reintroduced by udev rules.
The virtio-pci symlinks are considered to be deprecated and
should be replaced by the native PCI symlinks.
Example output for a virtio disk in PCI slot 7:
$ ls /dev/disk/by-path
pci-0000:00:07.0
pci-0000:00:07.0-part1
virtio-pci-0000:00:07.0
virtio-pci-0000:00:07.0-part1
See also
[1] https://lists.freedesktop.org/archives/systemd-devel/2017-February/038326.html
[2] https://lists.freedesktop.org/archives/systemd-devel/2017-March/038397.html
This reverts f073b1b but keeps the same symlinks for compatibility.
|
|
The code that calls this function doesn't care, but it looks bad.
|
|
|
|
|
|
various coredump fixes
|
|
The CCW id_net_name_path detection didn't account for virtio
interfaces on the CCW bus. As a result the default interface
names for virtio-ccw interfaces would use the old eth<x>
format instead of enc<busid>.
Since virtio-pci interface naming follows the naming rules
of the parent bus, the names_ccw() logic was changed to apply
the CCW interface naming rules to virtio interfaces as well,
e.g. enc2000 for an interface with a CCW bus id 0.0.2000.
As virtio interfaces are apt to get the otherwise unusual
CCW bus id 0.0.0000, the last '0' is now preserved in this
case.
The virtio subsystem skipping loop has been moved from
names_pci() into a function skip_virtio() that can be reused
for all bus types with virtio network devices.
Since virtio-ccw interfaces use single CCW addresses the ccwgroup
requirement was relaxed and the C definitions were changed
accordingly.
|
|
strsignal() sucks, as it tries to generate human readable strings from
something that isn't really human readable by concept. Let's use
signal_to_string() instead, making this more grokkable. Difference is:
SIGINT gets translated → "SIGINT" rather than → "Interrupted".
|
|
Instead of using a temp buffer to replace whitespace in variable
substitutions, just allow util_replace_whitespace to replace in-place.
Add a comment to util_replace_whitespace indicating it is used to replace
in-place, to prevent accidental future breakage.
|
|
Move the large case statement into its own function
|
|
gcc doesn't like &, even though &sbuf and buf are the same things afaiu.
Follow-up for e20a917105b.
|
|
|
|
Replace spaces in expanded fields in SYMLINK properties by default.
|
|
gperf-3.1 generates lookup functions that take a size_t length
parameter instead of unsigned int. Test for this at configure time.
Fixes: https://github.com/systemd/systemd/issues/5039
|
|
|
|
If the string_escape option is either unset or 'replace' (i.e. if it is
not 'none'), then enable whitespace replacement in SYMLINK variable
substitution values, as added in the last patch.
This will keep any whitespace that is directly contained in a SYMLINK
value, but will replace any whitespace that is added to the SYMLINK
value as a result of variable substitution (except $result/%c).
This fixes bug 4833.
|
|
If replace_whitespace is true, each substitution value has all its
whitespace removed/replaced by util_replace_whitespace (except the
SUBST_RESULT substitution - $result{} or %c{} - which handles spaces
itself as field separators). All existing callers are updated to
pass false, so no functional change is made by this patch.
This is needed so the SYMLINK assignment can replace any spaces
introduced through variable substitution, becuase the SYMLINK value is
a space-separated list of symlinks to create. Any variables that
contain spaces will thus unexpectedly change the symlink value from
a single symlink to multiple incorrectly-named symlinks.
This is used in the next patch, which enables the whitespace
replacement for SYMLINK variable substitution.
|
|
This improves kernel command line parsing in a number of ways:
a) An kernel option "foo_bar=xyz" is now considered equivalent to
"foo-bar-xyz", i.e. when comparing kernel command line option names "-" and
"_" are now considered equivalent (this only applies to the option names
though, not the option values!). Most of our kernel options used "-" as word
separator in kernel command line options so far, but some used "_". With
this change, which was a source of confusion for users (well, at least of
one user: myself, I just couldn't remember that it's systemd.debug-shell,
not systemd.debug_shell). Considering both as equivalent is inspired how
modern kernel module loading normalizes all kernel module names to use
underscores now too.
b) All options previously using a dash for separating words in kernel command
line options now use an underscore instead, in all documentation and in
code. Since a) has been implemented this should not create any compatibility
problems, but normalizes our documentation and our code.
c) All kernel command line options which take booleans (or are boolean-like)
have been reworked so that "foobar" (without argument) is now equivalent to
"foobar=1" (but not "foobar=0"), thus normalizing the handling of our
boolean arguments. Specifically this means systemd.debug-shell and
systemd_debug_shell=1 are now entirely equivalent.
d) All kernel command line options which take an argument, and where no
argument is specified will now result in a log message. e.g. passing just
"systemd.unit" will no result in a complain that it needs an argument. This
is implemented in the proc_cmdline_missing_value() function.
e) There's now a call proc_cmdline_get_bool() similar to proc_cmdline_get_key()
that parses booleans (following the logic explained in c).
f) The proc_cmdline_parse() call's boolean argument has been replaced by a new
flags argument that takes a common set of bits with proc_cmdline_get_key().
g) All kernel command line APIs now begin with the same "proc_cmdline_" prefix.
h) There are now tests for much of this. Yay!
|
|
|
|
One SA_RESTART is enough. Fall out from
e28c7cd0665364bb910fe2cead882623c23c28ac
|
|
It is possible to specify only one quote in udev rules, which is not
detected as an invalid quoting (" instead of "" for empty string).
Technically this doesn't lead to a bug, because the string ends in two
terminating nul characters at this position, but a user should still be
reminded that his configuration is invalid.
|
|
We already set it in most cases, but make sure to set it in all others too, and
document that that's a good idea.
|
|
This looks like a copy&paste error from the code block above.
|
|
|
|
Link: port to new ethtool ETHTOOL_xLINKSETTINGS
This patch defines a new ETHTOOL_GLINKSETTINGS/SLINKSETTINGS API,
handled by the new get_link_ksettings/set_link_ksettings .
This is a WIP version based on this [kernel
patch](https://patchwork.kernel.org/patch/8411401/).
commit 0527f1c
http://github.com/torvalds/linux/commit/3f1ac7a700d039c61d8d8b99f28d605d489a60cfommit
35afb33
|
|
We don't have plural in the name of any other -util files and this
inconsistency trips me up every time I try to type this file name
from memory. "formats-util" is even hard to pronounce.
|
|
Tree wide cleanups
|
|
|
|
This reverts some changes introduced in d054f0a4d4.
xsprintf should be used in cases where we calculated the right buffer
size by hand (using DECIMAL_STRING_MAX and such), and never in cases where
we are printing externally specified strings of arbitrary length.
Fixes #4534.
|
|
Switch drivers uses phys_port_name attribute to pass front panel port
name to user. Use it to generate netdev names.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
|
|
|
|
This makes strjoin and strjoina more similar and avoids the useless final
argument.
spatch -I . -I ./src -I ./src/basic -I ./src/basic -I ./src/shared -I ./src/shared -I ./src/network -I ./src/locale -I ./src/login -I ./src/journal -I ./src/journal -I ./src/timedate -I ./src/timesync -I ./src/nspawn -I ./src/resolve -I ./src/resolve -I ./src/systemd -I ./src/core -I ./src/core -I ./src/libudev -I ./src/udev -I ./src/udev/net -I ./src/udev -I ./src/libsystemd/sd-bus -I ./src/libsystemd/sd-event -I ./src/libsystemd/sd-login -I ./src/libsystemd/sd-netlink -I ./src/libsystemd/sd-network -I ./src/libsystemd/sd-hwdb -I ./src/libsystemd/sd-device -I ./src/libsystemd/sd-id128 -I ./src/libsystemd-network --sp-file coccinelle/strjoin.cocci --in-place $(git ls-files src/*.c)
git grep -e '\bstrjoin\b.*NULL' -l|xargs sed -i -r 's/strjoin\((.*), NULL\)/strjoin(\1)/'
This might have missed a few cases (spatch has a really hard time dealing
with _cleanup_ macros), but that's no big issue, they can always be fixed
later.
|
|
This stripping is contolled by a new boolean parameter. When the parameter
is true, it means that the caller does not care about the distinction between
initrd and real root, and wants to act on both rd-dot-prefixed and unprefixed
parameters in the initramfs, and only on the unprefixed parameters in real
root. If the parameter is false, behaviour is the same as before.
Changes by caller:
log.c (systemd.log_*): changed to accept rd-dot-prefix params
pid1: no change, custom logic
cryptsetup-generator: no change, still accepts rd-dot-prefix params
debug-generator: no change, does not accept rd-dot-prefix params
fsck: changed to accept rd-dot-prefix params
fstab-generator: no change, custom logic
gpt-auto-generator: no change, custom logic
hibernate-resume-generator: no change, does not accept rd-dot-prefix params
journald: changed to accept rd-dot-prefix params
modules-load: no change, still accepts rd-dot-prefix params
quote-check: no change, does not accept rd-dot-prefix params
udevd: no change, still accepts rd-dot-prefix params
I added support for "rd." params in the three cases where I think it's
useful: logging, fsck options, journald forwarding options.
|
|
- do not crash if an option without value is specified on the kernel command
line, e.g. "udev.log-priority" :P
- simplify the code a bit
- warn about unknown "udev.*" options — this should make it easier to spot
typos and reduce user confusion
|
|
No functional change.
|
|
|
|
log_error method is used instead of fprintf
|
|
errno (#4328)
as @poettering suggested in the #4320
|
|
The make_null_stdio() may fail. Let's check its result and print
warning message instead of keeping silence.
|
|
As suggested here:
https://github.com/systemd/systemd/pull/4296#issuecomment-251911349
Let's try AF_INET first as socket, but let's fall back to AF_NETLINK, so that
we can use a protocol-independent socket here if possible. This has the benefit
that our code will still work even if AF_INET/AF_INET6 is made unavailable (for
exmple via seccomp), at least on current kernels.
|
|
This appends the nvme name and namespace identifier attribute the the
PCI path for by-path links. Symlinks like the following are now present:
lrwxrwxrwx. 1 root root 13 Sep 16 12:12 pci-0000:01:00.0-nvme-1 -> ../../nvme0n1
lrwxrwxrwx. 1 root root 15 Sep 16 12:12 pci-0000:01:00.0-nvme-1-part1 -> ../../nvme0n1p1
Cc: Michal Sekletar <sekletar.m@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
|
|
|
|
ethtool_sset_info adding some extra space to it.
also fix valgrind warning
```
Unloaded link configuration context.
==31690==
==31690== HEAP SUMMARY:
==31690== in use at exit: 8,192 bytes in 2 blocks
==31690== total heap usage: 431 allocs, 429 frees, 321,164 bytes allocated
==31690==
==31690== 4,096 bytes in 1 blocks are still reachable in loss record 1 of 2
==31690== at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
==31690== by 0x166B32: mempool_alloc_tile (mempool.c:62)
==31690== by 0x166BBC: mempool_alloc0_tile (mempool.c:81)
==31690== by 0x15B8FC: hashmap_base_new (hashmap.c:732)
==31690== by 0x15B9F7: internal_hashmap_new (hashmap.c:766)
==31690== by 0x151291: conf_files_list_strv_internal (conf-files.c:103)
==31690== by 0x1514BA: conf_files_list_strv (conf-files.c:135)
==31690== by 0x13A1CF: link_config_load (link-config.c:227)
==31690== by 0x135B68: builtin_net_setup_link_init
(udev-builtin-net_setup_link.c:77)
==31690== by 0x1306B3: udev_builtin_init (udev-builtin.c:57)
==31690== by 0x11E984: adm_builtin (udevadm-test-builtin.c:72)
==31690== by 0x117B4D: run_command (udevadm.c:75)
```
Fixes #4080
|
|
The patch supports to configure
GenericReceiveOffload
LargeReceiveOffload
|
|
This patch supports these features to be on or off
Generic Segmentation Offload
TCP Segmentation Offload
UDP Segmentation Offload
fixes #432
|
|
|
