| Age | Commit message (Collapse) | Author |
|---|
|
If the udev queue is empty and "/run/udev/queue" does not exist,
"udevadm settle" would return with EXIT_FAILURE, because the inotify on
"/run/udev/queue" would fail with ENOENT.
This patch lets "udevadm settle" exit with EXIT_SUCCESS in this case.
|
|
After 1ea972174baba40dbc80c51cbfc4edc49764b59b err is no longer
set unless we hit a special case. Initialize it to 0 and remove
a check that will never fail.
|
|
No functional change expected :)
|
|
|
|
Before:
30,997,4553484,-;systemd-udevd[439]: renamed network interface wwan0 to wwp0s20u4i6systemd-udevd[439]: renamed network interface wlan0 to wlp3s0
30,998,1175077801,c;systemd-udevd[2345]: renamed network interface wwan0 to wwp0s20u4i6
After:
30,834,4553484,-;systemd-udevd[439]: renamed network interface wwan0 to wwp0s20u4i6
30,835,4732949,-;systemd-udevd[439]: renamed network interface wlan0 to wlp3s0
30,988,1175077801,-;systemd-udevd[2345]: renamed network interface wwan0 to wwp0s20u4i6
|
|
Under some conditions, in udev_rules_apply_to_event the fact that
result is 1024 bytes, creates problems if the output of the running
command/app is bigger then 1024 bytes.
|
|
|
|
The address may be already changed by other processes, or set
when creating the netdev from userspace.
|
|
|
|
This essentially swaps the roles of rtnl and udev in networkd. After this
change libudev is only used for waiting for udev to initialize devices and
to get udev-specific information needed for some [Match] attributes.
This in particular simplifies the code in containers where udev is not really
useful, but also simplifies things and reduces round-trips in the non-container
case.
|
|
|
|
The way the kernel namespaces have been implemented breaks assumptions
udev made regarding uevent sequence numbers. Creating devices in a
namespace "steals" uevents and its sequence numbers from the host. It
confuses the "udevadmin settle" logic, which might block until util a
timeout is reached, even when no uevent is pending.
Remove any assumptions about sequence numbers and deprecate libudev's
API exposing these numbers; none of that can reliably be used anymore
when namespaces are involved.
|
|
|
|
|
|
|
|
This reverts commit 8741f2defaf26aafe5ee0fd29954cfdf84ee519c: 'Add virtio-blk support to path_id' and
commit e3d563346c4237af23335cc6904e0662efdf62ad: 'udev: net_id - handle virtio buses'.
Distros may want to take note of this, as it changes behavior.
|
|
|
|
This does not belong in shared as it is mostly a detail of our networking subsystem.
Moreover, now we can use libudev here, which will simplify things.
|
|
Increase the chance of using the same link local address between reboots. The
pseudo random sequence of addresses we attempt is now seeded with data that is
very likely to stay the same between reboots, but at the same time be unique
to the specific machine/nic.
First we try to use the ID_NET_NAME_* data from the udev db combined with the
machin-id, which is guaranteed to be unique and persistent, if available. If
that is not possible (e.g., in containers where we don't have access to the
udev db) we fallback to using the MAC address of the interface, which is
guaranteed to be unique, and likely to be persistent.
[tomegun: three minor changes:
- don't expose HASH_KEY in the siphash24 header
- get rid of some compile-warnings (and some casts at the same time),
by using uint8_t[8] rather than uint64_t in the api
- added commit message]
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
|
|
GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity. In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.
|
|
|
|
Input devices like rudders or pedals are joystick-like; they don't have
buttons, but axes like RX, THROTTLE, or RUDDER. These don't interfere with
other device types with absolute axes (touch screens, touchpads, and
accelerometers), so it's fairly safe to mark them as ID_INPUT_JOYSTICK and thus
hand out dynamic ACLs to the user.
https://bugs.freedesktop.org/show_bug.cgi?id=70734
|
|
Bring some arrays that are used for DEFINE_STRING_TABLE_LOOKUP() in the
same order than the enums they reference.
Also, pass the corresponding _MAX value to the array initalizer where
appropriate.
|
|
|
|
there's a suitable root partition
|
|
same disk as the ESP, expose a property on the udev device
This is preparation for a logic to automatically discover the root
partition to boot from if no partition has been configured explicitly.
This makes use of our newly defined GPT type GUIDs for our root disks:
#define GPT_ROOT_X86 SD_ID128_MAKE(44,47,95,40,f2,97,41,b2,9a,f7,d1,31,d5,f0,45,8a)
#define GPT_ROOT_X86_64 SD_ID128_MAKE(4f,68,bc,e3,e8,cd,4d,b1,96,e7,fb,ca,f9,84,b7,09)
We define differen GUIDs for different architectures to allow images
which finde the right root partition for the appropriate arch.
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1038015
The problem seems to be that the your virtual DVD is emulating a really
old DVD device, and doing it kind of strangely.
> dracut:# /lib/udev/cdrom_id --debug /dev/sr0
> probing: '/dev/sr0'
> INQUIRY: [IMM ][Virtual CD/DVD ][0316]
> GET CONFIGURATION failed with SK=5h/ASC=24h/ACQ=00h
So your virtual drive rejects the GET CONFIGURATION command as illegal.
Other pre-MMC2 drives that don't accept this command usually return the
error
SK=5h,ASC=20h (invalid/unsupported command code), in which case cdrom_id
tries an older method, and then ID_CDROM_MEDIA_TRACK_COUNT_DATA gets set
and all the /dev/disk/by-label (etc) links get set up.
The virtual drive returns the error SK=5h,ASC=24h (invalid field in
Command Descriptor Block), which cdrom_id doesn't handle, so it gives up
and the links never get made.
The ideal solution would be to make the IMM to emulate a device that's
less than 15 years old, but I'm not going to hold my breath waiting for
that.
So probably cdrom_id should also use the old MMC fallback when the error
is SK=5h,ASC=24h, and then all of this would work as expected.
Suggested-by:Luca Miccini <lmiccini@redhat.com>
|
|
As pointed-out by clang -Wunreachable-code.
No behaviour changes.
|
|
for sizes
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
|
|
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice
that the speed was mistakenly documented to be in bytes before this change.
|
|
Also fix a copy-paste error that broke matching on interface name.
|
|
|
|
Just two minor style fixes...
|
|
This is the same as shown by 'ethtool -i <ifname>', and is sometimes
set even though DRIVER is not.
|
|
|
|
|
|
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
|
|
If -flto is used then gcc will generate a lot more warnings than before,
among them a number of use-without-initialization warnings. Most of them
without are false positives, but let's make them go away, because it
doesn't really matter.
|
|
It should match on the driver of the parent device.
|
|
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
|
|
|
|
The "sd_" prefix is supposed to be used on exported symbols only, and
not in the middle of names. Let's drop it from the cleanup macros hence,
to make things simpler.
The bus cleanup macros don't carry the "sd_" either, so this brings the
APIs a bit nearer.
|
