| Age | Commit message (Collapse) | Author |
|---|
|
udev uses inotify to implement a scheme where when the user closes
a writable device node, a change uevent is forcefully generated.
In the case of block devices, it actually requests a partition rescan.
This currently can't be synchronized with "udevadm settle", i.e. this
is not reliable in a script:
sfdisk --change-id /dev/sda 1 81
udevadm settle
mount /dev/sda1 /foo
The settle call doesn't synchronize there, so at the same time we try
to mount the device, udevd is busy removing the partition device nodes and
readding them again. The mount call often happens in that moment where the
partition node has been removed but not readded yet.
This exact issue was fixed long ago:
http://git.kernel.org/cgit/linux/hotplug/udev.git/commit/?id=bb38678e3ccc02bcd970ccde3d8166a40edf92d3
but that fix is no longer valid now that sequence numbers are no longer
used.
Fix this by forcing another mainloop iteration after handling inotify events
before unblocking settle. If the inotify event caused us to generate a
"change" event, we'll pick that up in the following loop iteration, before
we reach the end of the loop where we respond to settle's control message,
unblocking it.
|
|
Commit 9ea28c55a2 (udev: remove seqnum API and all assumptions about
seqnums) introduced a regresion, ignoring the timeout option when
waiting until the event queue is empty.
Previously, if the udev event queue was not empty when the timeout was
expired, udevadm settle was returning with exit code 1. To check if the
queue is empty, you could invoke udevadm settle with timeout=0. This
patch restores the previous behavior.
(David: fixed timeout==0 handling and dropped redundant assignment)
|
|
Parse properties in the form
EVDEV_ABS_00="<min>:<max>:<res>:<fuzz>:<flat>"
and apply them to the kernel device. Future processes that open that device
will see the updated EV_ABS range.
This is particularly useful for touchpads that don't provide a resolution in
the kernel driver but can be fixed up through hwdb entries (e.g. bcm5974).
All values in the property are optional, e.g. a string of "::45" is valid to
set the resolution to 45.
The order intentionally orders resolution before fuzz and flat despite it
being the last element in the absinfo struct. The use-case for setting
fuzz/flat is almost non-existent, resolution is probably the most common case
we'll need.
To avoid multiple hwdb invocations for the same device, replace the
hwdb "keyboard:" prefix with "evdev:" and drop the separate 60-keyboard.rules
file. The new 60-evdev.rules is called for all event nodes
anyway, we don't need a separate rules file and second callout to the hwdb
builtin.
|
|
No functional changes, just to make the next patch easier to review
|
|
No changes in the mapping, but previously we opened the device only on
successful parsing. Now we open the mapping as soon as we have a value that
looks interesting. Since errors are supposed to be the exception, not the
rule, this is probably fine.
|
|
Rather than building a map and looping through the map, immediately call the
ioctl when we have a successfully parsed property.
This has a side-effect: before the maximum number of ioctls was limited to the
size of the map (1024), now it is unlimited.
|
|
No point parsing the properties if we can't get the devnode to apply them
later. Plus, this makes future additions easier to slot in.
|
|
|
|
|
|
input_id already (tries to) tag accelerometers as such, but this only works
for absolute accelerometers. Recent kernels mark accelerometers through an
input prop. Trust that prop and always tag devices with it with
ID_INPUT_ACCELEROMETER.
Note that detection by the prop bit works the same as the existing detection
and will ensure that no other tags get set on the device.
|
|
Also referred to as trackpoint, trackstick. These are marked by recent kernels
through an input prop. Forward that prop as udev property so userspace can
easily determine whether there is a pointing stick present.
These devices were previously marked as ID_INPUT_MOUSE, for backwards
compatibility we keep that in place, the new property is an addition.
|
|
|
|
The dev_port concept is a bit confusing, expand on the comment a bit.
|
|
I'd argue that having firmware labels for such devices makes
no sense, but they exist, so make sure we handle them as best
as we can.
|
|
In case pci_slot overflows we were truncating pci_path instead.
|
|
also removes this warning:
src/udev/cdrom_id/cdrom_id.c: In function ‘cd_media_info.isra.13’:
src/udev/cdrom_id/cdrom_id.c:612:12: warning: assuming signed overflow
does not occur when assuming that (X + c) >= X is always true
[-Wstrict-overflow]
static int cd_media_info(struct udev *udev, int fd)
^
|
|
like:
src/shared/install.c: In function ‘unit_file_lookup_state’:
src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in
this function [-Wmaybe-uninitialized]
return r < 0 ? r : state;
^
src/shared/install.c:1796:13: note: ‘r’ was declared here
int r;
^
|
|
This allows set_action(), read_uevent_file() and read_db() to be made internal to libudev.
|
|
it is ironic that
"The only purpose of this structure is to cast the structure pointer
passed in addr in order to avoid compiler warnings. See EXAMPLE below."
from bind(2)
|
|
The data comes from the kernel, so chances of it being
garbled are low, but for correctness' sake, add the check.
CID #996458.
|
|
We were using a space more often than not, and this way is
codified in CODING_STYLE.
|
|
Instead introduce ensure_usec_initialized(), which copies the timestamp if possible otherwise
sets it to now(CLOCK_MONOTONIC).
|
|
EWOULDBLOCK is the same as EAGAIN, stop using it.
|
|
The information in the db is stale, so it does not make sense to
expose it any longer. Also, don't drop the kernel event, but simply
pass it on to userspace without ammending it.
|
|
This will allow us to clean up the device when we are notified about the worker being killed.
|
|
This allows us to move the db reading from udevd to libudev.
|
|
We were explicitly eagerly loading the db, then deletenig the backing file and then processing the
rules/symlinks. Instead we delete the backnig db file as the last step and let the db loading be
lazy as everywhere else.
This may save us a bit of work in casese where the db is not needed, but more importantly it hides
some implementation details of libudev-device form udevd.
|
|
To copy properties from one device to another. Drop the equivalent functionality from udevd.
|
|
|
|
This should have been committed with
udev_device_add_property - implicitly mark properties for saving to db
|
|
|
|
Properties should only be saved to the db when added to the udev_device by udevd, and only if
the property does not start with a '.'. Make this implicit rather than expose the marking of
properties.
|
|
This should be internal to the library as it is only about reflecting the sysfs state in the udev_device.
|
|
This essentially replaces
open("/run/udev/queue", O_WRONLY|O_CREAT|O_CLOEXEC|O_TRUNC|O_NOFOLLOW, 0444)
with
open("/run/udev/queue", O_WRONLY|O_CREAT|O_CLOEXEC|O_NOCTTY, 0644),
which is ok for our purposes.
|
|
|
|
|
|
|
|
The udev-settle guarantees that udevd is no longer processing any of the
events casued by udev-trigger. The way this works is that it sends a
synchronous PING to udevd after udev-trigger has ran, and when that returns
it knows that udevd has started processing the events from udev-trigger.
udev-settle will then wait for the event queue to empty before returning.
However, there was a race here, as we would only update the /run state at
the beginning of the event loop, before reading out new events and before
processing the ping.
That means that if the first uevent arrived in the same event-loop iteration
as the PING, we would return the ping before updating the queue state in /run
(which would happen on the next iteration).
The race window here is tiny (as the /run state would probably get updated
before udev-settle got a chance to read /run), but still a possibility.
Fix the problem by updating the /run state as the last step before returning
the PING.
We must still update it at the beginning of the loop as well, otherwise we
risk being stuck in poll() with a stale state in /run.
Reported-by: Daniel Drake <drake@endlessm.com>
|
|
Not terribly important, but the loop wasn't an actual loop,
making coverity unhappy.
CID #1261725.
|
|
Everything that is generated can be assumed to belong to CLEANFILES,
which means that the original file has to be in EXTRA_DIST. Simplify
the rules by generating as in $subject.
We have less lists to adjust manually, and 'make clean' actually
removes more stuff that before.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
The call iterates through cmsg list and closes all fds passed via
SCM_RIGHTS.
This patch also ensures the call is used wherever appropriate, where we
might get spurious fds sent and we should better close them, then leave
them lying around.
|
|
include-what-you-use automatically does this and it makes finding
unnecessary harder to spot. The only content of poll.h is a include
of sys/poll.h so should be harmless.
|
|
This reverts commit d6d810fbf8071f8510450dbacd1d083f37603656.
It's apparently not OK to pass MSG_CMSG_CLOEXEC to recvmsg() of raw
sockets.
|
|
Signed-off-by: Robert Milasan <rmilasan@suse.com>
|
|
Match{Name,OrginalName,Type,Driver,Path} can now take a space-separated glob of matches.
|
|
|
|
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
Stay uniform and use 'dev' rather than 'event->dev', as these are aliases (and event->dev looks
like it may be a typo for event->dev_db).
|
