| Age | Commit message (Collapse) | Author |
|---|
|
socket: Set SO_REUSEPORT before bind()
|
|
udev: destroy manager before cleaning environment
|
|
Due to our _cleanup_ usage for the udev manager, it will be destroyed
after the "exit:" label has finished. Therefore, it is the last
destruction done in main(). This has two side-effects:
- mac_selinux is destroyed before the udev manager is, possible causing
use-after-free if the manager-cleanup accesses selinux data
- log_close() is called *before* the manager is destroyed, possibly
re-opening the log if you use --debug (and thus not re-applying the
--debug option)
Avoid this by moving the manager-handling into a new function called
run(). This function will be left before we enter the "exit:" label in
main(), hence, the manager object will be destroyed early.
|
|
https://github.com/systemd/systemd/issues/462
|
|
Unlike dbus-daemon, the bus-proxy does not know the receiver of a
broadcast (as the kernel has exclusive access on the bus connections).
Hence, and "destination=" matches in dbus1 policies cannot be applied.
But kdbus does not place any restrictions on *SENDING* broadcasts, anyway.
The kernel never returns EPERM to KDBUS_CMD_SEND if KDBUS_MSG_SIGNAL is
set. Instead, receiver policies are checked. Hence, stop checking sender
policies for signals in bus-proxy and leave it up to the kernel.
This fixes some network-manager bus-proxy issues where NM uses weird
dst-based matches against interface-based matches. As we cannot perform
dst-based matches, our bus-proxy cannot properly implement this policy.
|
|
Right now, if you start a session via 'su' or 'sudo' from within a
session, we make sure to re-use the existing session instead of creating a
new one. We detect this by reading the session of the requesting PID.
However, with gnome-terminal running as a busname-unit, and as such
running outside the session of the user, this will no longer work.
Therefore, this patch makes sure to return the existing session of a VT if
you start a new one.
This has the side-effect, that you will re-use a session which your PID is
not part of. This works fine, but will break assumptions if the parent
session dies (and as such close your session even though you think you're
part of it). However, this should be perfectly fine. If you run multiple
logins on the same session, you should really know what you're doing. The
current way of silently accepting it but choosing the last registered
session is just weird.
|
|
In VMs / virtio drives there is no model. Also don't print "Disk:
(null)" in output if no model is available.
|
|
bind() fails if it is called before setting SO_REUSEPORT and another
process is already binded to the same addess.
A new reuse_port option has been introduced to socket_address_listen()
to set the option as part of socket initialization.
|
|
Fix weird coding-style:
- proper white-space
- no if (func() >= 0) bail-outs
- fix braces
- avoid 'r' for anything but errno
- init _cleanup_ variables unconditionally, even if not needed
|
|
This partially reverts commit 78d298bbc57e412574ea35e6e66f562d97fd9ebc.
The changed coding-style is kept, but the ENOENT->ENOSYS conversion is
reverted.
kmod was fixed upstream to no longer return ENOSYS. Also see:
https://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/?id=114ec87c85c35a2bd3682f9f891e494127be6fb5
The kmod fix is marked for backport, so no reason to bump the kmod
version we depend on.
|
|
udev: event - simplify udev_event_spawn() logic
|
|
netlink container rework
Allocate containers as separate structs instead of individual arrays for each member field.
|
|
This facility was never a proper solution, but only papered over
real bugs in the kernel. There are no known sysfs "timing bugs"
since a long time.
|
|
bootchart: Ensure that /proc/schedstat is read entirely (v2)
|
|
richardmaw-codethink/nspawn-userns-uid-shift-autodetection-fix
nspawn: determine_uid_shift before forking
|
|
nspawn: Don't remount with fewer options
|
|
On multi-core systems file /proc/schedstat may be
larger than 4096 bytes and pread() will only read part of it.
Fix issue https://github.com/systemd/systemd/issues/404
|
|
It is needed in one branch of the fork, but calculated in another
branch.
Failing to do this means using --private-users without specifying a uid
shift always fails because it tries to shift the uid to UID_INVALID.
|
|
When we do a MS_BIND mount, it inherits the flags of its parent mount.
When we do a remount, it sets the flags to exactly what is specified.
If we are in a user namespace then these mount points have their flags
locked, so you can't reduce the protection.
As a consequence, the default setup of mount_all doesn't work with user
namespaces. However if we ensure we add the mount flags of the parent
mount when remounting, then we aren't removing mount options, so we
aren't trying to unlock an option that we aren't allowed to.
|
|
When shutting down, if systemd was started with --log-target=null,
systemd-shutdown was being called with --log-target=console.
|
|
While the LSB suggests only [A-Za-z0-9], that doesn't prevent admins
from doing the wrong thing. Lets not generate invalid names in
that case.
|
|
Do not assume that a non-service unit type is a target.
|
|
Push the extraction of the envp + argv as close as possible to their use, to avoid code
duplication. As a sideeffect fix logging when delaing execution.
|
|
udev: Remove accelerometer helper
|
|
systemd-mailing-devs/1435512180-3659-1-git-send-email-ebiggers3@gmail.com
util: fix incorrect escape sequence in string_is_safe()
|
|
|
|
Until commit 1f2ecb0 ("bootchart: kill a bunch of global variables")
variable "head" was declared global and this action was performed by svg_header.
Now that "head" is local and passed to each function called by svg_do(...)
move the code at the beginning of svg_do(...) to restore the correct behaviour.
|
|
This was a left-over from before we supported containers.
|
|
Instead of representing containers as several arrays, make a new
netlink_container struct and keep one array of these structs. We
also introduce netlink_attribute structs that in the future will
hold meta-information about each atribute.
|
|
Also rename from rtnl_* to netlink_*.
|
|
This was an oversight, they are no different from regular containers in this respect.
|
|
It's moved to the iio-sensor-proxy D-Bus service.
|
|
Commit c0f32805 ("logind: use sd_event timer source for inhibitor
logic") reworked the main loop logic of logind so that it uses a
real timeout callback handler to execute delayed functions.
What the old code did, however, was to call those functions on
every iteration in the main loop, not only when the timeout
expired.
Restore that behavior by bringing back manager_dispatch_delayed(),
and call it from manager_run(). The internal event source callback
manager_inhibit_timeout_handler() was turned into a wrapper of
manager_dispatch_delayed() now.
|
|
install: explicitly return 0 on success
|
|
Maybe there is some left-over value stored in r from previous function
call. Let's make sure we always return consistent error code when we reach end of
the function body.
Fixes following crash of test-install,
Assertion 'r == 0' failed at src/test/test-install.c:52, function main(). Aborting.
[1] 11703 abort (core dumped) ./test-install
|
|
Fix for issue https://github.com/systemd/systemd/issues/139
- Implement fixes suggested by @teg to -v2
- Implement fixes suggested by @zonque to -v3 and -v4
|
|
bus-proxy: ignore 'log' attributes in XML policy
|
|
'log' is unsupported but nothing to warn about. Ignore it just like we
ignore 'eavesdrop'.
|
|
sd-netlink cleanups
|
|
core: fix reversed dependency check in unit_check_unneeded
|
|
The kernel bonding layer allows passing an array of ARP IP targets as
bond-configuration. Due to the weird implementation of arrays in netlink
(which we haven't figure out a generic way to support, yet), we usually
hard-code the supported array-sizes. However, this should not be exported
from sd-netlink.
Instead, make sure the caller just uses it's current hack of enumerating
the types, and the sd-netlink core will have it's own list of supported
array-sizes (to be removed in future extensions, btw!). If either does not
match, we will just return a normal error.
Note that we provide 2 constants for ARP_IP_TARGETS_MAX now. However, both
have very different reasons:
- the constant in netdev-bond.c is used to warn the user that the given
number of targets might not be supported by the kernel (even though the
kernel might increase that number at _any_ time)
- the constant in sd-netlink is solely used due to us missing a proper
array implementation. Once that's supported in the type-system, it can
be removed without notice
Last but not least, this patch turns the log_error() into a log_warning().
Given that the previous condition was off-by-one, anyway, it never hit at
the right time. Thus, it was probably of no real use.
|
|
Explicitly export the root type-system to the type-system callers. This
avoids treating NULL as root, which for one really looks backwards (NULL
is usually a leaf, not root), and secondly prevents us from properly
debugging calling into non-nested types.
Also rename the root to "type_system_root". Once we support more than
rtnl, well will have to revisit that, anyway.
|
|
Empty type-systems are just fine. Avoid the nasty hack in
union-type-systems that treat empty type-systems as invalid. Instead check
for the actual types-array and make sure it's non-NULL (which is even true
for empty type-systems, due to "empty_types" array).
|
|
In sd-netlink-message, we always guarantee that the currently selected
type-system is non-NULL. Otherwise, we would be unable to parse any types
in the current container level. Hence, this assertion must be true:
message->container_type_system[m->n_containers] != NULL
During message_new() we currently do not verify that this assertion is
true. Instead, we blindly access nl_type->type_system and use it (which
might be NULL for basic types and unions). Fix this, by explicitly
checking that the root-level type is nested.
Note that this is *not* a strict requirement of netlink, but it's a strict
requirement for all message types we currently support. Furthermore, all
the callers of message_new() already verify that only supported types are
passed, therefore, this is a pure cosmetic check. However, it might be
needed on the future, so make sure we don't trap into this once we change
the type-system.
|
|
The NETLINK_TYPE_META pseudo-type is actually equivalent to an empty
nested type. Drop it and define an empty type-system instead.
This also has the nice side-effect that m->container_type_system[0] is
never NULL (which has really nasty side-effects if you try to read
attributes).
|
|
Right now we store the maximum type-ID of a type-system. This prevents us
from creating empty type-systems. Store the "count" instead, which should
be treated as max+1.
Note that type_system_union_protocol_get_type_system() currently has a
nasty hack to treat empty type-systems as invalid. This might need some
modification later on as well.
|
|
size_t is usually 64bit and int 32bit on a 64bit machine. This probably
does not matter for netlink message sizes, but nevertheless, avoid
hard-coding it anywhere.
|
|
Same as NLType, move NLTypeSystem into netlink-types.c and hide it from
the outside. Provide an accessor function for the 'max' field that is used
to allocate suitable array sizes.
Note that this will probably be removed later on, anyway. Once we support
bigger type-systems, it just seems impractical to allocate such big arrays
for each container entry. An RBTree would probably do just fine.
|
|
If we extend NLType to support arrays and further extended types, we
really want to avoid hard-coding the type-layout outside of
netlink-types.c. We already avoid accessing nl_type->type_system outside
of netlink-types.c, extend this to also avoid accessing any other fields.
Provide accessor functions for nl_type->type and nl_type->size and then
move NLType away from the type-system header.
With this in place, follow-up patches can safely turn "type_system" and
"type_system_union" into a real "union { }", and then add another type for
arrays.
|
|
Make sure we never access type->type_system or type->type_system_union
directly. This is an implementation detail of the type-system and we
should always use the accessors. Right now, they only exist for 2-level
accesses (type-system to type-system). This patch introduces the 1-level
accessors (type to type-system) and makes use of it.
This patch makes sure the proper assertions are in place, so we never
accidentally access sub-type-systems for non-nested/union types.
Note that this places hard-asserts on the accessors. This should be fine,
as we expect callers to only access sub type-systems if they *know*
they're dealing with nested types.
|
