summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-03-03sd-network: IPv4 link-local support [v2]Umut Tezduyar Lindskog
Implements IPv4LL with respect to RFC 3927 (http://tools.ietf.org/rfc/rfc3927.txt) and integrates it with networkd. Majority of the IPv4LL state machine is taken from avahi (http://avahi.org/) project's autoip. IPv4LL can be enabled by IPv4LL=yes under [Network] section of .network file. IPv4LL works independent of DHCP but if DHCP lease is aquired, then LL address will be dropped. [tomegun: removed a trailing newline and a compiler warning]
2014-03-03networkd: wait-online - fix typoTom Gundersen
2014-03-03core: fix assert when trying to serialize non-initialized bus peer tracker ↵Lennart Poettering
object
2014-03-03silence warningThomas Hindoe Paaboel Andersen
2014-03-03core: add missing show-status.[ch]Lennart Poettering
2014-03-03conf-parser: minor optimization in config_parse_string()Lennart Poettering
2014-03-03conf-parser: drop special casing in config_parse_path()Lennart Poettering
The code checked for two lvalues that aren't even using config_parse_path(), so let's drop these checks and make the function completely generic again.
2014-03-03conf-parser: config_parse_path_strv() is not generic, so let's move it into ↵Lennart Poettering
load-fragment.c The parse code actually checked for specific lvalue names, which is really wrong for supposedly generic parsers...
2014-03-03core: move config_parse_set_status() into load-fragment.cLennart Poettering
Let's keep specific config parsers close to where they are needed. Only the really generic ones should be defined in conf-parser.[ch].
2014-03-03core: move ShowStatus type into the coreLennart Poettering
Let's make the scope of the show-status stuff a bit smaller, and make it private to the core, rather than shared API in shared/.
2014-03-03conf-parse: rename config_parse_level() to config_parse_log_level()Lennart Poettering
"level" is a bit too generic, let's clarify what kind of level we are referring to here.
2014-03-03logind: ignore lid switch events for 30s after each suspend and 3min after ↵Lennart Poettering
startup This is needed to give USB docking stations and suchlike time to settle, so that a display connected to an USB docking station can actually act as a lid swith inhibitor correctly. With this change we should have somewhat reliable docking station support in place.
2014-03-03logind: fix printf formatLennart Poettering
2014-03-03logind: ignore lid switch if more than 1 display is connectedLennart Poettering
Previously we expected the desktop environment to take an inhibitor lock, but this opened a race on boot-up where logind might already be running but no DE is active. Hence, let's move checking for additional displays into logind. This also opens up this logic for other DEs, given that only GNOME implemented the inhibitor logic so far.
2014-03-03core: introduce new RuntimeDirectory= and RuntimeDirectoryMode= unit settingsLennart Poettering
As discussed on the ML these are useful to manage runtime directories below /run for services.
2014-03-03execute: no need to include seccomp.h from execute.hLennart Poettering
2014-03-03execute: free directory path if we fail to remove it because we cannot ↵Lennart Poettering
allocate a thread
2014-03-03sd-dhcp-lease: add sd_dhcp_lease_get_next_server()Tom Gundersen
2014-03-03sd-dhcp-lease: add sd_dhcp_lease_get_server_identifier()Tom Gundersen
2014-03-03sd-dhcp-lease: add Root Path supportTom Gundersen
This is necessary when mounting /dev/nfs based on a DHCP lease.
2014-03-03bus: add sd_bus_track object for tracking peers, and port core over to itLennart Poettering
This is primarily useful for services that need to track clients which reference certain objects they maintain, or which explicitly want to subscribe to certain events. Something like this is done in a large number of services, and not trivial to do. Hence, let's unify this at one place. This also ports over PID 1 to use this to ensure that subscriptions to job and manager events are correctly tracked. As a side-effect this makes sure we properly serialize and restore the track list across daemon reexec/reload, which didn't work correctly before. This also simplifies how we distribute messages to broadcast to the direct busses: we only track subscriptions for the API bus and implicitly assume that all direct busses are subscribed. This should be a pretty OK simplification since clients connected via direct bus connections are shortlived anyway.
2014-03-02Disallow sizes with increasing unit sizeZbigniew Jędrzejewski-Szmek
Things like 3B4T, 4B50B, 400 100 (meaning 4*1024**4+3, 54, and 500, respectively) are now disallowed. It is necessary to say 4T3B, 54B, 500 instead. I think this was confusing and error prone. As a special form, 400B 100 is allowed, i.e. "B" suffix is treated as different from "", although they mean the same thing.
2014-03-02Allow fractional parts in disk sizesZbigniew Jędrzejewski-Szmek
It seems natural to be able to say SystemMaxUsage=1.5G. https://bugzilla.redhat.com/show_bug.cgi?id=1047568
2014-03-01networkd-wait-online: use automatic cleanupThomas Hindoe Paaboel Andersen
2014-02-28nspawn: fix detection of missing /proc/self/loginuidTero Roponen
Running 'systemd-nspawn -D /srv/Fedora/' gave me this error: Failed to read /proc/self/loginuid: No such file or directory Container Fedora failed with error code 1. This patch fixes the problem.
2014-02-28sd-network: turn states 'unknown' and 'unmanaged' into errnosTom Gundersen
2014-02-28sd-network: fix headerTom Gundersen
2014-02-28architecture: Add tilegxHenrik Grindal Bakken
Add Tilera's TILE-GX processor family support.
2014-02-28networkd: add networkd-wait-onlineTom Gundersen
This is mostly a proof of concept to try sd-network, so we don't hook it up with a .service file quite yet. We probably want it to be more clever about deciding when we are 'online'. The binary will wait for at least one network managed by networkd, and until all networks managed by networkd are configured.
2014-02-28sd-network: add new libraryTom Gundersen
This is similar to sd-login, but exposes the state of networkd rather than logind. Include it in libsystemd-dhcp and rename it to libsystemd-network.
2014-02-27cdrom_id: use the old MMC fallbackLukas Nykryn
https://bugzilla.redhat.com/show_bug.cgi?id=1038015 The problem seems to be that the your virtual DVD is emulating a really old DVD device, and doing it kind of strangely. > dracut:# /lib/udev/cdrom_id --debug /dev/sr0 > probing: '/dev/sr0' > INQUIRY: [IMM ][Virtual CD/DVD ][0316] > GET CONFIGURATION failed with SK=5h/ASC=24h/ACQ=00h So your virtual drive rejects the GET CONFIGURATION command as illegal. Other pre-MMC2 drives that don't accept this command usually return the error SK=5h,ASC=20h (invalid/unsupported command code), in which case cdrom_id tries an older method, and then ID_CDROM_MEDIA_TRACK_COUNT_DATA gets set and all the /dev/disk/by-label (etc) links get set up. The virtual drive returns the error SK=5h,ASC=24h (invalid field in Command Descriptor Block), which cdrom_id doesn't handle, so it gives up and the links never get made. The ideal solution would be to make the IMM to emulate a device that's less than 15 years old, but I'm not going to hold my breath waiting for that. So probably cdrom_id should also use the old MMC fallback when the error is SK=5h,ASC=24h, and then all of this would work as expected. Suggested-by:Luca Miccini <lmiccini@redhat.com>
2014-02-27journalctl: refuse extra arguments with --verify and similarZbigniew Jędrzejewski-Szmek
Positional arguments only make sense with the default action. For other actions, complain instead of ignoring them silently.
2014-02-27logs-show: fix corrupt output with empty messagesUoti Urpala
If a message had zero length, journalctl would print no newline, and two output lines would be concatenated. Fix. The problem was introduced in commit 31f7bf199452 ("logs-show: print multiline messages"). Affected short and verbose output modes. Before fix: Feb 09 21:16:17 glyph dhclient[1323]: Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit after: Feb 09 21:16:17 glyph dhclient[1323]: Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit
2014-02-26mount: don't fire PropertiesChanged signals for mounts that are stoppedLennart Poettering
2014-02-26mount: don't send out PropertiesChanged message if actually nothing got changedLennart Poettering
2014-02-26mount: minor modernizationLennart Poettering
2014-02-25Use /var/run/dbus/system_bus_socket for the D-Bus socketZbigniew Jędrzejewski-Szmek
2014-02-26Revert back to /var/run at a couple of problemsLennart Poettering
This partially reverts 41a55c46ab8fb4ef6727434227071321fc762cce Some specifications we want to stay compatibility actually document /var/run, not /run, and we should stay compatible with that. In order to make sure our D-Bus implementation works on any system, regardless if running systemd or not, we should always use /var/run which is the only path mandated by the D-Bus spec. Similar, glibc hardcodes the utmp location to /var/run, and this is exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this public API, too. We simply do not support systems where /var/run is not a symlink → /run. Hence both are equivalent. Staying compatible with upstream specifications hence weighs more than cleaning up superficial appearance.
2014-02-25Replace /var/run with /run in remaining placesZbigniew Jędrzejewski-Szmek
/run was already used almost everywhere, fix the remaining places for consistency.
2014-02-26exec: imply NoNewPriviliges= only when seccomp filters are used in user modeLennart Poettering
2014-02-26core: add new RestrictAddressFamilies= switchLennart Poettering
This new unit settings allows restricting which address families are available to processes. This is an effective way to minimize the attack surface of services, by turning off entire network stacks for them. This is based on seccomp, and does not work on x86-32, since seccomp cannot filter socketcall() syscalls on that platform.
2014-02-26nspawn: no need for duplicate checks against EEXISTLennart Poettering
2014-02-26seccomp: we should control NO_NEW_PRIVS on our own, not let seccomp do this ↵Lennart Poettering
for us
2014-02-25networkd: add basic support for MACVLANsTom Gundersen
2014-02-25login: Allow calling org.freedesktop.login1.Seat.SwitchToJasper St. Pierre
2014-02-25login: set pos-slot to fallback on pos-evictionDavid Herrmann
If we evict a session position, we open the position slot for future sessions. However, there might already be another session on the same position if both were started on the same VT. This is currently done if gdm spawns the session on its own Xserver. Hence, look for such a session on pos-eviction and claim the new slot immediately.
2014-02-25login: fix pos-array allocationDavid Herrmann
GREEDY_REALLOC takes a pointer to the real size, not the array-width as argument. Therefore, our array is currently way to small to keep the seat positions. Introduce GREEDY_REALLOC0_T() as typed version of GREEDY_REALLOC and store the array-width instead of array-size.
2014-02-25nspawn: add new switch --network-macvlan= to add a macvlan device to the ↵Lennart Poettering
container
2014-02-24Remove dead lines in various placesZbigniew Jędrzejewski-Szmek
As pointed-out by clang -Wunreachable-code. No behaviour changes.
2014-02-25hostnamectl: read virtualization/architecture from remote sideLennart Poettering
This way we make this more network/container transparent and also do not require any client side privileges.