summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-09-02timesyncd: allow two missed replies before reselecting serverMiroslav Lichvar
After receiving a reply from the server, allow two missed replies before switching to another server to avoid unnecessary clock hopping when packets are getting lost in the network.
2014-09-02timesyncd: remove retry_timer logic which is covered by the server timeoutKay Sievers
2014-09-02timesyncd: wait before reconnecting to first serverMiroslav Lichvar
When all servers are exhausted, wait for one poll interval before trying to connect again to the first server in the list. Also, keep increasing the polling interval to make sure a client not getting any valid replies will not send requests to any server more frequently than is allowed by the maximum polling interval.
2014-09-01sd-rtnl: don't assign to unused variableTom Gundersen
Reported by Thomas H.P. Andersen <phomes@gmail.com>.
2014-09-01login: simplify controller handlingDavid Herrmann
Simplify the way we handler session-controllers and fix several shortcomings: * send ReleaseDevice() signals on forced session takeover * fix mem-leaks for busnames in case VT preparation fails (non-critical) * avoid passing pre-allocated names to helpers
2014-08-31login: fix mem leakThomas Hindoe Paaboel Andersen
2014-08-31config-parser: fix mem leakThomas Hindoe Paaboel Andersen
2014-08-31journal-remote: fix check if realloc failedThomas Hindoe Paaboel Andersen
2014-08-31test-network: fix off-by-one error in testTom Gundersen
2014-08-31missing: add IFF_MULTI_QUEUETom Gundersen
This was added in 3.8, but we should building with 3.7 headers. Reported by Samuli Suominen <ssuominen@gentoo.org>.
2014-08-31journalctl: Allow to disable line cap with --lines=allJan Janssen
2014-08-31Quote unit names in suggested systemctl commandlinesZbigniew Jędrzejewski-Szmek
The fact that unit names have to be quoted can be a bit surprising. Show quotes in the hint commandline, but only after checking that this is necessary, since quotes are visually heavy and usually not needed. https://bugs.freedesktop.org/show_bug.cgi?id=82832
2014-08-30timesyncd-manager: don't clear current_server_name if ServerAddress is NULLSteven Noonan
https://bugs.freedesktop.org/show_bug.cgi?id=83091 [zj: add comment]
2014-08-30sd-dhcp6-client: properly calculate buffer size when parsing optionsZbigniew Jędrzejewski-Szmek
Also make pointer calculations more explicit so they are easier to understand.
2014-08-30test-dhcp6-client: Fix option lengthPatrik Flykt
The whole DHCPv6 test message length was incorrectly used as the length of DHCPv6 options causing the following bad memory access: $ build/test-dhcp6-client Assertion 'interface_index >= -1' failed at ../src/libsystemd-network/sd-dhcp6-client.c:129, function sd_dhcp6_client_set_index(). Ignoring. ================================================================= ==29135==ERROR: AddressSanitizer: global-buffer-overflow on address 0x7fe204aa9148 at pc 0x7fe204a5958f bp 0x7fff3e47d470 sp 0x7fff3e47d460 READ of size 1 at 0x7fe204aa9148 thread T0 #0 0x7fe204a5958e in option_parse_hdr ../src/libsystemd-network/dhcp6-option.c:145 #1 0x7fe204a59884 in dhcp6_option_parse ../src/libsystemd-network/dhcp6-option.c:165 #2 0x7fe204a4eb9c in test_advertise_option ../src/libsystemd-network/test-dhcp6-client.c:227 #3 0x7fe204a51c58 in main ../src/libsystemd-network/test-dhcp6-client.c:584 #4 0x7fe2031590df in __libc_start_main (/lib64/libc.so.6+0x200df) #5 0x7fe204a4cc5b (/home/test/systemd/build/test-dhcp6-client+0x25c5b) 0x7fe204aa9148 is located 2 bytes to the right of global variable 'msg_advertise' from '../src/libsystemd-network/test-dhcp6-client.c' (0x7fe204aa9080) of size 198 0x7fe204aa9148 is located 56 bytes to the left of global variable 'msg_reply' from '../src/libsystemd-network/test-dhcp6-client.c' (0x7fe204aa9180) of size 173 SUMMARY: AddressSanitizer: global-buffer-overflow ../src/libsystemd-network/dhcp6-option.c:145 option_parse_hdr
2014-08-30cgroup-util: shorten cg_path_get_sessionZbigniew Jędrzejewski-Szmek
2014-08-30systemd: fix error messageZbigniew Jędrzejewski-Szmek
2014-08-30test-compress: also test with incompressible inputsZbigniew Jędrzejewski-Szmek
2014-08-30journal/compress: use LZ4_compress_continue()Evangelos Foutras
We can't use LZ4_compress_limitedOutput_continue() because in the worst-case scenario the compressed output can be slightly bigger than the input block. This generally affects very few blocks and is no reason to abort the compression process. I ran into this when I noticed that Chromium core dumps weren't being compressed. After switching to LZ4_compress_continue() a ~330MB Chromium core dump gets compressed to ~17M.
2014-08-30sd-ipv4ll: name the correct sourceTom Gundersen
2014-08-30Fix a few more typosRuben Kerkhof
2014-08-30libudev: fix symbol version for udev_queue_flush() and udev_queue_get_fd()Michael Biebl
Those symbols were introduced in commit 14cb733684d3c3f50d088a3a370ddf8e8894dfa4 and released in v215.
2014-08-30udev: bump event timeout to 60 secondsKay Sievers
2014-08-30udev: remove userspace firmware loading supportKay Sievers
2014-08-29timesyncd: check root distanceMiroslav Lichvar
NTPv4 servers don't reply with unsynchronized status when they lost synchronization, they only keep increasing the root dispersion and it's up to the client to decide at which point they no longer consider it synchronized. Ignore replies with root distance over 5 seconds.
2014-08-29timesyncd: get kernel timestamp in nanosecondsMiroslav Lichvar
2014-08-29timesyncd: fix calculation of transmit timeMiroslav Lichvar
The kernel timestamp (recv_time) is made earlier than current time (now_ts), use the timestamp captured before sending packet directly.
2014-08-29timesyncd: check if stratum is validMiroslav Lichvar
2014-08-29Fix a few typos in log messagesRuben Kerkhof
2014-08-28sd-event: simplify sd_event_source_set_name()David Herrmann
free_and_strdup() does exactly the same as sd_event_source_set_name(), use it!
2014-08-28sd-event: name event sources used in librariesTom Gundersen
This should help in debugging failing event sources.
2014-08-28sd-event: use event source name rather than address in debug messagesTom Gundersen
2014-08-28sd-event: allow naming event sourcesTom Gundersen
2014-08-28sd-rtnl: log if kernel buffer is overrun as we currently can't handle that caseTom Gundersen
2014-08-28hibernate-resume: refuse to run outside of an initrdLennart Poettering
2014-08-28networkctl: do not mix dns and ntp serversZbigniew Jędrzejewski-Szmek
2014-08-28bus: don't skip interfaces in bus_message_map_properties_changed()David Herrmann
Skipping interfaces randomly without the caller specifying it is nasty. Avoid this and let the caller do that themselves.
2014-08-28locale: fix sending PropertiesChanged for x11 keymap changedDavid Herrmann
The sd_bus_emit_properties_changed() call for x11 keymap changes lacks commas.. whoops. Fix it! Now localed emits PropertiesChanged signals again.
2014-08-28use the switch_root function in shutdownHarald Hoyer
removes code duplication also move switch-root to shared
2014-08-28macro: use unique variable names for math-macrosDavid Herrmann
Similar to container_of(), we now use unique variable names for the bascic math macros MAX, MIN, CLAMP, LESS_BY. Furthermore, unit tests are added to verify they work as expected. For a rationale, see: commit fb835651aff79a1e7fc5795086c9b26e59a8e6ca Author: David Herrmann <dh.herrmann@gmail.com> Date: Fri Aug 22 14:41:37 2014 +0200 shared: make container_of() use unique variable names
2014-08-28bus: fix use-after-free in slot-releaseDavid Herrmann
We must not access slot->floating after we possible dropped the last reference to it. Fix all callback-invocations to first check slot->floating and possible disconnect the slot, then release the last reference.
2014-08-28terminal: free sysview-device names on destructionDavid Herrmann
Don't leak the device-names during device destruction in sysview. Somehow, the device-name is "const char*", so make it "char*" first to avoid warnings when calling free() on it.
2014-08-28terminal: free xkb state on keyboard destructionDavid Herrmann
Fix leaking the xkb-state during keyboard destruction, leaking lots of xkb references into the wild.
2014-08-28nspawn: fix --network-interfaceTom Gundersen
Use SETLINK when modifying an existing link.
2014-08-28terminal: sysview: don't return uninitialized error codesDavid Herrmann
In case 'scan_evdev' and 'scan_drm' are both false, we never set 'r' to anyhting, thus return an uninitialized error code. Fix this by always returning 0 as we catch negative codes earlier, anyway. Thanks to Thomas H.P. Anderson for the report.
2014-08-27sd-journal: verify that object start with the field nameZbigniew Jędrzejewski-Szmek
If the journal is corrupted, we might return an object that does not start with the expected field name and/or is shorter than it should.
2014-08-27sd-journal: properly convert object->size on big endianZbigniew Jędrzejewski-Szmek
mmap code crashes when attempting to map an object of zero size. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=758392 https://bugs.freedesktop.org/show_bug.cgi?id=82894
2014-08-27terminal: remove unused variableThomas Hindoe Paaboel Andersen
2014-08-27util: fix minimal race where we might miss SIGTERMs when forking off an agentLennart Poettering
Before forking, block all signals, and unblock them afterwards. This way the child will have them blocked, and we won't lose them.
2014-08-27terminal: add systemd-evcat input debugging toolDavid Herrmann
Like systemd-subterm, this new systemd-evcat tool should only be used to debug libsystemd-terminal. systemd-evcat attaches to the running session and pushes all evdev devices attached to the current session into an idev-session. All events of the created idev-devices are then printed to stdout for input-event debugging.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-29 07:36:39 +0000