| Age | Commit message (Collapse) | Author |
|---|
|
It's quite a bit shorter and just as readable.
(The full sentence with "pointing to" was added to replace a text that used
"ln -s %s %s". Using the "ln" syntax is indeed unclear, because it's not
obvious which is the source and which is the target, and because symlink(2)
uses the opposite order to ln(1). But with the unicode arrow there should
be no ambiguity.)
|
|
Executing 'systemctl enable' on the same unit twice would cause
a warning about a missing [Install] section to be printed. To avoid
this, count all symlinks that "would" be created, and return 1
no matter if we actually created a symlink or skipped creation because
it already exists.
|
|
This fixes 'preset-all' with a unit that is a dangling symlink.
$ systemctl --root=/ preset-all
Unit syslog.service is an alias to a unit that is not present, ignoring.
Unit auditd.service is masked, ignoring.
Unit NetworkManager.service is masked, ignoring.
|
|
$ systemctl --root=/ preset foobar.service
Cannot find unit foobar.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@.service
Cannot find unit foobar@.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@blah.service
Cannot find unit foobar@blah.service or foobar@.service.
Failed to preset: No such file or directory.
|
|
|
|
|
|
more dhcp fixes
|
|
Cgroup fixes.
|
|
News and other small cleanups
|
|
core: use an AF_UNIX/SOCK_DGRAM socket for cgroup agent notification
|
|
"0 units listed." is still printed.
|
|
Coverity was complaing, but it was a false positive (CID #1354669).
Nevertheless, it's better to rewrite the code so that units is never
null.
|
|
|
|
Before:
$ systemctl show --property TriggerLimitIntervalSec test.socket
TriggerLimitIntervalSec=2000000
After:
$ systemctl show --property TriggerLimitIntervalUSec test.socket
TriggerLimitIntervalUSec=2s
|
|
Fixes: #3194
|
|
It's only relevant to DHCP, and it should be where the DUID is configured too.
|
|
|
|
networkd lib: cleanup FOREACH_WORD
|
|
|
|
|
|
|
|
change trigger timeout defaults
|
|
|
|
For similar reasons as the recent addition of a limit on sessions.
Note that we don't enforce a limit on inhibitors per-user currently, but
there's an implicit one, since each inhibitor takes up one fd, and fds are
limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
|
|
|
|
If we have a lot of simultaneous sessions we really shouldn't send the full
list of active sessions with each PropertyChanged message for user and seat
objects, as that can become quite substantial data, we probably shouldn't dump
on the bus on each login and logout.
Note that the global list of sessions doesn't send out changes like this
either, it only supports requesting the session list with ListSessions().
If cients want to get notified about sessions coming and going they should
subscribe to SessionNew and SessionRemoved signals, and clients generally do
that already.
This is kind of an API break, but then again the fact that this was included
was never documented.
|
|
Let's make sure we process session and inhibitor pipe fds (that signal
sessions/inhibtors going away) at a higher priority
than new bus calls that might create new sessions or inhibitors. This helps
ensuring that the number of open sessions stays minimal.
|
|
We really should put limits on all resources we manage, hence add one to the
number of concurrent sessions, too. This was previously unbounded, hence set a
relatively high limit of 8K by default.
Note that most PAM setups will actually invoke pam_systemd prefixed with "-",
so that the return code of pam_systemd is ignored, and the login attempt
succeeds anyway. On systems like this the session will be created but is not
tracked by systemd.
|
|
The unit file settings are called SocketUser= and SocketGroup= hence name these
fields that way in the "systemd-analyze dump" output too.
https://github.com/systemd/systemd/issues/3171#issuecomment-216216995
|
|
Let's lower the default values a bit, and pick different defaults for
Accept=yes and Accept=no sockets.
Fixes: #3167
|
|
No need to check whether alloca() failed...
|
|
The macro determines the right length of a AF_UNIX "struct sockaddr_un" to pass to
connect() or bind(). It automatically figures out if the socket refers to an
abstract namespace socket, or a socket in the file system, and properly handles
the full length of the path field.
This macro is not only safer, but also simpler to use, than the usual
offsetof() + strlen() logic.
|
|
|
|
|
|
dbus-daemon currently uses a backlog of 30 on its D-bus system bus socket. On
overloaded systems this means that only 30 connections may be queued without
dbus-daemon processing them before further connection attempts fail. Our
cgroups-agent binary so far used D-Bus for its messaging, and hitting this
limit hence may result in us losing cgroup empty messages.
This patch adds a seperate cgroup agent socket of type AF_UNIX/SOCK_DGRAM.
Since sockets of these types need no connection set up, no listen() backlog
applies. Our cgroup-agent binary will hence simply block as long as it can't
enqueue its datagram message, so that we won't lose cgroup empty messages as
likely anymore.
This also rearranges the ordering of the processing of SIGCHLD signals, service
notification messages (sd_notify()...) and the two types of cgroup
notifications (inotify for the unified hierarchy support, and agent for the
classic hierarchy support). We now always process events for these in the
following order:
1. service notification messages (SD_EVENT_PRIORITY_NORMAL-7)
2. SIGCHLD signals (SD_EVENT_PRIORITY_NORMAL-6)
3. cgroup inotify and cgroup agent (SD_EVENT_PRIORITY_NORMAL-5)
This is because when receiving SIGCHLD we invalidate PID information, which we
need to process the service notification messages which are bound to PIDs.
Hence the order between the first two items. And we want to process SIGCHLD
metadata to detect whether a service is gone, before using cgroup
notifications, to decide when a service is gone, since the former carries more
useful metadata.
Related to this:
https://bugs.freedesktop.org/show_bug.cgi?id=95264
https://github.com/systemd/systemd/issues/1961
|
|
* gitignore: typo fix for test-networkd-conf
* networkd: fix double include
|
|
bus_append_unit_property_assignment() was missing an argument for
sd_bus_message_append() when processing BlockIODeviceWeight leading to
segfault. Fix it.
Signed-off-by: Tejun Heo <htejun@fb.com>
|
|
Rework DUID setting
|
|
|
|
make virtualization detection quieter, rework unit start limit logic, detect unit file drop-in changes correctly, fix autofs state propagation
|
|
Fix incorrect string deduplication in udev
|
|
Commit 82501b3fc added an early break when a terminal node is found to
incorrect place -- before setting c. This caused trie to be built that
does not correspond to what it points to in buffer, causing incorrect
deduplications:
# cat /etc/udev/rules.d/99-bug.rules
ENV{FOO}=="0"
ENV{xx0}=="BAR"
ENV{BAZ}=="00"
# udevadm test
* RULE /etc/udev/rules.d/99-bug.rules:1, token: 0, count: 2, label: ''
M ENV match 'FOO' '0'(plain)
* RULE /etc/udev/rules.d/99-bug.rules:2, token: 2, count: 2, label: ''
M ENV match 'xx0' 'BAR'(plain)
* RULE /etc/udev/rules.d/99-bug.rules:3, token: 4, count: 2, label: ''
M ENV match 'BAZ' 'x0'(plain)
* END
The addition of "xx0" following "0" will cause a trie like this to be
created:
c=\0
c=0 "0"
c=0 "xx0" <-- note the c is incorrect here, causing "00" to be
c=O "FOO" deduplicated to it
c=R "BAR"
This in effect caused the usb_modeswitch rule for Huawei modems to never
match and this never be switched to serial mode from mass storage.
|
|
Alternatively, this could perhaps be removed since it was broken for a
long time and noone seemed to care.
But it was helpful for me today.
|
|
install: cache the presets before evaluating
|
|
Closes #2166.
We only allow 0, infinity and forever.
infinity and forever is same.
|
|
networkd: add support to set route table
|
|
Dnssec incapdns fix
|
|
The previous implementation traversed the various config directories,
walking the preset files and parsing each line to determine if a service
should be enabled or disabled. It did this for every service which
resulted in many more file operations than neccessary.
This approach parses each of the preset entries into an array which is
then used to check if each service should be enabled or disabled.
|
|
(zjs: the tree is now back to 0b2abe0f034f7f2d8654adb11b516d1090ec9a9c.)
|
|
|
