| Age | Commit message (Collapse) | Author |
|---|
|
This changes the fstab mount option x-initrd-rootfs.mount to
x-initrd.rootfs, in order to only use a single namespace "x-initrd." for
all mount options of the initrd.
|
|
Add option to force journal sync with fsync. Default timeout is 5min.
Interval configured via SyncIntervalSec option at journal.conf. Synced
journal files will be marked as OFFLINE.
Manual sync can be performed via sending SIGUSR1.
|
|
Let's say you have two initscripts, A and B:
A contains in its LSB header:
Required-Start: C
and B contains in its LSB header:
Provides: C
When systemd is parsing /etc/rc.d/, depending on the file order, you
can end up with either:
- B is parsed first. An unit "C.service" will be "created" and will be
added as additional name to B.service, with unit_add_name. No bug.
- A is parsed first. An unit "C.service" is created for the
"Required-Start" dependency (it will have no file attached, since
nothing provides this dependency yet). Then B is parsed and when trying
to handle "Provides: C", unit_add_name is called but will fail, because
"C.service" already exists in manager->units. Therefore, a merge should
occur for that case.
|
|
Setting children_max according to RAM leads to too much concurrent I/O.
|
|
The manager already prints "Time has been changed" at level info. It
seems too verbose to print the time change message additionally for
every waiting timer unit.
Downgrade the per-unit message to debug.
|
|
backend
|
|
|
|
hello is sent
This alos gets rid of explicit sd_open_fd() and sd_open_address()
constructors in favour of sd_new() + sd_new_start() where the
negotiation parameters may be set it in between.
|
|
|
|
|
|
This reverts commit f5c88ec1330b61787441156de7d764a140774bd2. It is no
longer necessary, and adds unnecessary magic.
|
|
Setting MaxRetentionSec= caused the kernel log to overflow and the
journal daemon to enter an endless loop.
Logging from the journald main loop gets directed to /dev/kmsg,
which wakes up journald again. We skip the import of this message
by checking for our own PID, but this still causes the main loop
to never go to sleep again because we never stopped logging from
there.
|
|
|
|
Some code really wants to know whether there was a string list parsed,
so don't take the shortcut here, and always allocate a string list, even
if it is an empty one.
https://bugs.freedesktop.org/show_bug.cgi?id=62558
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=62605
|
|
Otherwise clang at least thinks that both consts apply to char.
|
|
Also remove unused variable.
|
|
src/libsystemd-bus/bus-message.h:41:1: warning: attribute 'packed' is ignored, place it after
"struct" to apply attribute to type declaration [-Wignored-attributes]
|
|
Requesites are not supposed to be auto-started afterall, they are just
checks, so don't try to be smarter here than appropriate.
Based on a patch from Michal Schmidt.
|
|
Distributions that never shipped upstart do not have
"telinit" in /lib/upstart/..
Defaults to /lib/upstart/telinit so there is no change
for systems existing installs.
|
|
- Reword messages a bit
- Correct check whether EACCES is in the set of errors
- Don't complain if no journal files are found
- allocate Set object for errors lazily since in the best case we don't
need it at all.
- don't consider it an error if /run/log/journal doesn't exist (because
that's the usual case actually, if storage is enabled)
|
|
Some parts of systemd (at least the DBus activation codepath) "reply"
to signals, which of course have the no-reply flag set. We will be
defensive here and still send out a reply if we're passed a signal.
Regression introduced by: c6a818c82035da91e
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Tested-by: Mantas Mikulėnas <grawity@gmail.com>
|
|
Previously, it would set all caps, but it should drop them all, anything
else makes little sense.
Also, document that this works as it does, and what to do in order to
assign all caps to the bounding set.
https://bugzilla.redhat.com/show_bug.cgi?id=914705
|
|
Ensure clients don't overflow usec_t when doing relative time changes.
This is mostly just paranoia and protection against accidents, after all
clients are already authenticated, and they can se the time to any
value they wish anyway, but better be safe than sorry.
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1152187/comments/14
|
|
|
|
|
|
|
|
|
|
gcc does not know that errno cannot be negative, and warns
about unitialized variables later on. Kill the warnings by
returning -errno only after checking that errno is positive.
|
|
There are many ways in which we can get those checks wrong, so it is
better to warn and then error out on a real access failure.
The error messages are wrapped to <80 lines, because their primary
use is to be displayed in the terminal, and it is easier to read them
this way. Reading them in the journal can be a bit trickier, but
this is a bug in logs-show.c.
|
|
This loop over acls is a bit too much to keep inside
of another loop.
|
|
that
|
|
No longer allow dots at the beginning or end of host names, Or double
dots.
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1152187/comments/14
|
|
/var/log/journal
If we notice that we unprivileged and not in any of the groups which
have access to /var/log/journal, print a nice message about which groups
do.
This checks and prints all groups that are in the default ACL for
/var/log/journal, which is not necessarily correct for all journal
files, but pretty close.
|
|
|
|
|
|
|
|
|
|
This completes c1dae1b3c9729fb8ab749dd4e2dad07e0fad7ed8 in a way.
|
|
The vacuum code used to stop vacuuming after one deletion, even
when max_use was still exceeded.
Also make usage a uint64_t, as the code already pretends it is one.
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
|
|
This can give huge efficiency gains, e.g. if only MESSAGE
is required and all other fields can be ignored.
|
|
This matches the C API more closely, and also enables the
user to get just partial information, should she desire to
do so.
Functions names in error messages are modified to not include
the class name, because Python uses just the function name
into functions declared as METH_NOARGS, and error messages
were inconsistent.
|
|
Getting the cursor is split out from .get_next() into
.get_cursor(). This mirrors the C API more closely, and
also makes things a bit faster if the cursor is not needed.
|
|
The behaviour wrt. seconds vs. microseconds was inconsistent.
Now _Reader always uses native units (us), while Reader always
uses seconds and accepts both floats and ints. This way the
conversion is always done in the Python layer, and the lower
level API allows access to the journal API without the potentially
lossy conversion between double and uint64_t.
|
|
|
|
Was returning 1 on read error.
|
|
This one is fake. But let's kill it, avoiding two condition checks
in the process.
src/shutdownd/shutdownd.c: In function 'when_wall':
src/shutdownd/shutdownd.c:182:44: warning: 'sub' may be used uninitialized in this function [-Wmaybe-uninitialized]
return elapse > sub ? elapse - sub : 1;
^
|
|
The new gcc isn't bad!
In file included from src/bootchart/svg.c:36:0:
src/bootchart/svg.c: In function 'svg_ps_bars':
./src/shared/util.h:524:13: warning: 'enc_name' may be used uninitialized in this function [-Wmaybe-uninitialized]
free(*(void**) p);
^
src/bootchart/svg.c:821:37: note: 'enc_name' was declared here
char _cleanup_free_*enc_name;
^
CC src/udev/mtd_probe/mtd_probe-probe_smartmedia.o
XSLT man/systemd.unit.5
In file included from src/bootchart/svg.c:36:0:
src/bootchart/svg.c: In function 'svg_pss_graph':
./src/shared/util.h:524:13: warning: 'enc_name' may be used uninitialized in this function [-Wmaybe-uninitialized]
free(*(void**) p);
^
src/bootchart/svg.c:395:37: note: 'enc_name' was declared here
char _cleanup_free_*enc_name;
^
|
|
src/initctl/initctl.c: In function 'server_init':
src/initctl/initctl.c:282:13: warning: 'r' may be used uninitialized in this function [-Wmaybe-uninitialized]
int r;
^
|
|
|
