| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Otherwise we would fail with -EINVAL. Thanks to Brandon Philips
<brandon.philips@coreos.com>, for reporting the bug.
|
|
Init-Reboot is tried if a client IP address has been given when
the DHCP client is started. In Init-Reboot, start by sending a
broadcast DHCP Request including the supplied client IP address
but without the server identifier. After sending the request,
enter Reboot state.
If a DHCP Ack is received, proceed to Bound state as usual. If a
DHCP Nak is received or the first timeout triggers, start the
address acquisition over from DHCP Init state.
See RFC 2131, sections 4.3.2, 4.4, 4.4.1 and 4.4.2 for details.
|
|
This causes the DHCP client struct initialization and DHCP client
starting to be factored out into functions of their own.
|
|
|
|
Remove identical checksum function implementation from the test
case code.
|
|
|
|
|
|
Add a new config 'Activating' directive which denotes whether a busname
is actually registered on the bus. It defaults to 'yes'.
If set to 'no', the .busname unit only uploads policy, which will remain
active as long as the unit is running.
|
|
messages queued for it
This way we can be sure that the service the messages are ultimately
intended for finds all fields it might need.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=76335
|
|
number of fixed strings
|
|
negotiate it, refuse to take it
This makes sure we don't mishandle if developers specificy a different
AcceptFileDescriptors= setting in .busname units then they set for the
bus connection in the activated program.
|
|
AcceptFD= defaults to true, thus making sure that by default fd passing
is enabled for all activatable names. Since for normal bus connections
fd passing is enabled too by default this makes sure fd passing works
correctly regardless whether a service is already activated or not.
Making this configurable on both busname units and in bus connections is
messy, but unavoidable since busnames are established and may queue
messages before the connection feature negotiation is done by the
service eventually activated. Conversely, feature negotiation on bus
connections takes place before the connection acquires its names.
Of course, this means developers really should make sure to keep the
settings in .busname units in sync with what they later intend to
negotiate.
|
|
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
|
|
|
|
The default slack caused there to be a delay before timers fired. Solve it
by setting timers that should trigger immediately to trigger far in the past.
This brings down the ideal-case dhcp lease acquisition time from about 500ms to
about 50ms (over a veth pair, so no network latency involved).
All the rest of the time (except for ~0.5ms) is spent in the bind() call in,
dhcp_network_bind_raw_socket(). I don't know if there is anything to be done
about that though...
|
|
It seems that resources are properly deallocated by MHD_destroy_response,
even if enqueuing the request fails.
Also replace a trivial printf with alloca and fixup log message
(it'll now be something like "Connection from CN=some.host.name",
which seems clear enough.)
|
|
This chunk got lost in one of the rebases :(
|
|
new verb "poweroff"
There's really no point to send the reboot SIGINT from machinectl
directly, if machined can do that anyway. This saves code, and
makes machinectl network transparent for these verbs. And while we are
at it we can easily add a "poweroff" verb in addition to "reboot". Yay!
|
|
"leader"
|
|
Given that glibc searches for /dev/shm by just looking for any tmpfs we
should be more careful with providing tmpfs instances arbitrary code
might end up writing to.
|
|
|
|
|
|
indicating a failure state
(Subject to --no-legend)
|
|
|
|
|
|
After all, it is ultimately linked to libsystems.so anyway, thus belongs
there and shares very little with the rest of logind, hence let's move
this away.
|
|
peers
This is supposed to be an extension of SO_PEERCRED and SO_PEERSEC,
except for cgroup information.
|
|
|
|
Now --listen-http=-3 --listen-https=-4 can be used to spawn a µhttpd
server on those two ports, in http and https modes respectively.
As before, --listen-http=3 --listen-https=4 will launch µhttpd servers
on ports 3 and 4.
|
|
Most of the messages we send do not require a allocating and
freeing a buffer, to optimize this by using const strings.
Also, rename respond_error to mhd_respond*, since it is used
not only for errors.
Make use of information from printf to avoid one extra call to
strlen.
|
|
The whole tool is made dependent on µhttpd availability. It should be
easy to make the µhttpd parts conditional, but since transfer over
HTTP seems to be the primary use case, currently this is not done.
Current implementation uses nested epoll loops: sd-event is used for
the external event loop, and µhttpd uses epoll in its own
loop. Unfortunately µhttpd does not expose enough information to add
the descriptors it uses to the external event loop. This means that
starvation of other events is possible, if one of the inner µhttpd
loops is constantly busy. This means that µhttpd servers should not
be mixed with other sources.
The TLS authentication parts haven't been really tested properly, and
should not be take too seriously.
|
|
|
|
If --trust=ca.crt is used, only clients presenting certificates signed
by the ca will be allowed to proceed. No hostname matching is
performed, so any client wielding a signed certificate will be
authorized.
Error functions are moved from journal-gateway to microhttp-util and
made non-static, since now they are used in two source files.
|
|
Prefix "gnutls: " is added. Some semi-random mapping of gnutls levels
to syslog levels is done, but since gnutls levels seem to be used
rather loosely, most end up as debug.
|
|
A certificate authority certificate will be presented to clients,
causing them to present their client certificate, if it is signed by
this authority (default behaviour of most clients). No certificate
checking is actually performed.
|
|
Also improve logging to print out the parsed address on error.
|
|
|
|
In preparation for use elsewhere.
|
|
|
|
|
|
|
|
addition to the host
|
|
|
|
|
|
|
