| Age | Commit message (Collapse) | Author |
|---|
|
When queuing unit jobs, we should rather replace existing units than
fail. This is especially important when we queued a user-shutdown and a
new login is encountered. In this case, we better raplce the shutdown
jobs. systemd takes care of everything else.
|
|
If the last reference to a user is released, we queue stop-jobs for the
user-service and slice. Only once those are finished, we drop the
user-object. However, if a new session is opened before the user object is
fully dropped, we currently incorrectly re-use the object. This has the
effect, that we get stale sessions without a valid "systemd --user"
instance.
Fix this by properly allowing user_start() to be called, even if
user->stopping is true.
|
|
Make sure to put static fields together in "struct User". This makes it
easier to figure out the lifetime of each field.
|
|
Just like user->slice, there is no reason to store the unit name in /run,
nor should we allocate it dynamically on job instantiation/removal. Just
keep it statically around at all times and rely on user->started ||
user->stopping to figure out whether the unit exists or not.
|
|
Few changes to user_new() and user_free():
- Use _cleanup_(user_freep) in constructor
- return 'int' from user_new()
- make user_free() deal with partially initialized objects
- keep reverse-order in user_free() compared to user_new()
- make user_free() return NULL
- make user_free() accept NULL as no-op
|
|
Currently, we allocate user->slice when starting a slice, but we never
release it. This is incompatible if we want to re-use a user object once
it was stopped. Hence, make sure user->slice is allocated statically on
the user object and use "u->started || u->stopping" as an indication
whether the slice is actually available on pid1 or not.
|
|
Lets not pretend we support changing XDG_RUNTIME_DIR via logind state
files. There is no reason to ever write the string into /run, as we
allocate it statically based on the UID, anyway. Lets stop that and just
allocate the runtime_path in "struct User" at all times.
We keep writing it into the /run state to make sure pam_systemd of
previous installs can still read it. However, pam_systemd is now fixed to
allocate it statically as well, so we can safely remove that some time in
the future.
Last but not least: If software depends on systemd, they're more than free
to assume /run/user/$uid is their runtime dir. Lets not require sane
applications to query the environment to get their runtime dir. As long as
applications know their login-UID, they should be safe to deduce the
runtime dir.
|
|
Enable TasksMax by default for all units
|
|
nitpick from PR #1910
|
|
network: dhcp6 - fix mem leak
|
|
machined,logind: be more careful when accepting PIDs and UIDs from clients
|
|
|
|
|
|
Also, enable TasksAccounting= for all services by default, too.
See:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/035006.html
|
|
src/basic/virt.c: In function 'detect_vm_device_tree':
src/basic/virt.c:117:17: error: unknown type name '_cleanup_closedir_'
_cleanup_closedir_ DIR *dir = NULL;
src/basic/virt.c:128:17: error: implicit declaration of function 'FOREACH_DIRENT' [-Werror=implicit-function-declaration]
FOREACH_DIRENT(dent, dir, return -errno)
|
|
from 7a695d8e
CID#1338679
|
|
Always validate first before we start processing the data.
|
|
|
|
from 0ec0deaa
|
|
bool anymore
|
|
|
|
This new setting configures the TasksMax= field for the slice objects we
create for each user.
This alters logind to create the slice unit as transient unit explicitly
instead of relying on implicit generation of slice units by simply
starting them. This also enables us to set a friendly description for
slice units that way.
|
|
After all, we don't actually really need the slice to work, it's just
nice to have it.
|
|
|
|
nginx defines an uppercase "M" that way (in contrast to the lowercase
"m" for "minute"), and it sounds like an OK logic to follow, so that we
understand a true superset of time values nginx understands.
http://nginx.org/en/docs/syntax.html
|
|
Don't be confused by subvols without parent. This is after all how the
root subvol is set up.
|
|
This allows initializing the TasksMax= setting of all units by default
to some fixed value, instead of leaving it at infinity as before.
|
|
units, too
We added this for the per-unit setting, hence let's enable this for the
global default settings too.
|
|
udev/path_id: improve and enhance bus detection for Linux on z Systems
|
|
analyze: dot graph missing Requisite, superfluous ConflictedBy
|
|
When deserializing we can now have an attached network without the various clients yet
having been configured. Hence, don't misused the link->network as a check to determine
if a link is ready to be used, but check the state explicitly.
|
|
We already draw Conflicts. I see no reason for having every red line in
the graph duplicated in the opposite direction.
|
|
|
|
We lost them a long time ago with commit 048ecf5b843.
|
|
stop managing per-interface IP forwarding settings
|
|
Remove support for RequiresOverridable= and RequisiteOverridable=
|
|
As it turns out the kernel does not support per-interface IPv6 packet
forwarding controls (unlike as it does for IPv4), but only supports a
global option (#1597). Also, the current per-interface management of the
setting isn't really useful, as you want it to propagate to at least one
more interface than the one you configure it on. This created much grief
(#1411, #1808).
Hence, let's roll this logic back and simplify this again, so that we
can expose the same behaviour on IPv4 and IPv6 and things start to work
automatically again for most folks: if a network with this setting set
is set up we propagate the setting into the global setting, but this is
strictly one-way: we never reset it again, and we do nothing for network
interfaces where this setting is not enabled.
Fixes: #1808, #1597.
|
|
Move check whether ipv6 is available into link_ipv6_privacy_extensions()
to keep it as internal and early as possible.
Always check if there's a network attached to a link before we apply
sysctls. We do this for most of the sysctl functions already, with this
change we do it for all.
|
|
We really should use %i for ints, and %u for unsigneds, and be careful
what we pick depending on the type we want to print.
|
|
With this change, the idiom:
r = write_string_file(p, buf, 0);
if (r < 0) {
if (verify_one_line_file(p, buf) > 0)
r = 0;
}
gets reduced to:
r = write_string_file(p, buf, WRITE_STRING_FILE_VERIFY_ON_FAILURE);
i.e. when writing the string fails and the new flag
WRITE_STRING_FILE_VERIFY_ON_FAILURE is specified we'll not return a
failure immediately, but check the contents of the file. If it matches
what we wanted to write we suppress the error and exit cleanly.
|
|
Improve and enhance the path_id udev builtin to correctly handle bus'
available on Linux on z Systems (s390).
Previously, the CCW bus and, in particular, any FCP devices on it, have
been treated separately. This commit integrates the CCW bus into the
device chain loop. FCP devices and their associated SCSI disks are now
handled through the common SCSI handling functions in path_id.
This implies also a change in the naming of the symbolic links created
by udev. So any backports of this commit to existing Linux distribution
must be done with care. If a backport is required, a udev rule must be
created to also create the "old-style" symbolic links.
Apart from the CCW bus, this commit adds bus support for the:
- ccwgroup bus which manages network devices, and
- ap bus which manages cryptographic adapters
- iucv bus which manages IUCV devices on z/VM
|
|
The initrd version of systemd-fsck-root.service must wait for
local-fs-pre.target just like systemd-fsck@.service to prevent
modifications to the filesystem prior to resuming from hibernation.
As-is my laptop routinely fails to resume due to fsck errors. The rest
of the time it is probably silently corrupting the filesystem.
Unlike normal boot, in the initrd systemd-fsck-root.service has no
special significance so it needs to be kept in sync with
systemd-fsck@.service. The name systemd-fsck-root.service is only used
to preserve state across switch-root.
|
|
The new switch operates like --network-veth, but may be specified
multiple times (to define multiple link pairs) and allows flexible
definition of the interface names.
This is an independent reimplementation of #1678, but defines different
semantics, keeping the behaviour completely independent of
--network-veth. It also comes will full hook-up for .nspawn files, and
the matching documentation.
|
|
core: use SD_EVENT_PRIORITY_NORMAL-n instead on -n
|
|
|
|
sd-ndisc: add missing parens
|
|
Otherwise the call might fail, because the error structure is already
initialized.
|
|
This allows us to shorten our code a bit.
|
|
Now that we don't have RequiresOverridable= and RequisiteOverridable=
dependencies anymore, we can get rid of tracking the "override" boolean
for jobs in the job engine, as it serves no purpose anymore.
While we are at it, fix some error messages we print when invoking
functions that take the override parameter.
|
|
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
|
