| Age | Commit message (Collapse) | Author |
|---|
|
nspawn and the container child use eventfd to wait and notify each other
that they are ready so the container setup can be completed.
However in its current form the wait/notify event ignore errors that
may especially affect the child (container).
On errors the child will jump to the "child_fail" label and terminate
with _exit(EXIT_FAILURE) without notifying the parent. Since the eventfd
is created without the "EFD_NONBLOCK" flag, this leaves the parent
blocking on the eventfd_read() call. The container can also be killed
at any moment before execv() and the parent will not receive
notifications.
We can fix this by using cheap mechanisms, the new high level eventfd
API and handle SIGCHLD signals:
* Keep the cheap eventfd and EFD_NONBLOCK flag.
* Introduce eventfd states for parent and child to sync.
Child notifies parent with EVENTFD_CHILD_SUCCEEDED on success or
EVENTFD_CHILD_FAILED on failure and before _exit(). This prevents the
parent from waiting on an event that will never come.
* If the child is killed before execv() or before notifying the parent,
we install a NOP handler for SIGCHLD which will interrupt blocking calls
with EINTR. This gives a chance to the parent to call wait() and
terminate in main().
* If there are no errors, parent will block SIGCHLD, restore default
handler and notify child which will do execv(), then parent will pass
control to process_pty() to do its magic.
This was exposed in part by:
https://bugs.freedesktop.org/show_bug.cgi?id=76193
Reported-by: Tobias Hunger tobias.hunger@gmail.com
|
|
Move the container wait logic into its own wait_for_container() function
and add two status codes: CONTAINER_TERMINATED or CONTAINER_REBOOTED.
The status will be stored in its argument, this way we handle:
a) Return negative on failures.
b) Return zero on success and set the status to either
CONTAINER_REBOOTED or CONTAINER_TERMINATED.
These status codes are used to terminate nspawn or loop again in case of
CONTAINER_REBOOTED.
|
|
|
|
There was this code:
if (to_path_len > 0)
memcpy(p, to_path, to_path_len);
That didn't add the terminating zero, so the resulting string was
corrupt if this code path was taken.
Using strcpy() instead of memcpy() solves this issue, and also
simplifies the code.
Previously there was special handling for shortening "../../" to
"../..", but that has now been replaced by a path_kill_slashes() call,
which also makes the result prettier in case the input contains
redundant slashes that would otherwise be copied to the result.
|
|
|
|
|
|
|
|
vendor string array.
The string "Microsoft Corporation" is used in the Surface Tablet's DMI vendor ID.
https://bugs.freedesktop.org/show_bug.cgi?id=78312
|
|
|
|
|
|
|
|
Create initial stamp file with compiled-in time to prevent bootups
with clocks in the future from storing invalid timestamps.
At shutdown, only update the timestamp if we got an authoritative
time to store.
|
|
|
|
|
|
Djalal Harouni <tixxdz@opendz.org>:
There is also this one genrated by LTO, IMO it's a false positive since
we do *check* for "lease" but the code is not consistent since in that
code path, "lease" is initialized to NULL in other places, except for
this one:
src/resolve/resolved-manager.c: In function 'manager_update_resolv_conf':
src/libsystemd-network/sd-dhcp-lease.c:67:18: warning: 'lease' may be used uninitialized in this function [-Wmaybe-uninitialized]
if (lease->dns_size) {
^
src/network/sd-network.c:146:24: note: 'lease' was declared here
sd_dhcp_lease *lease;
^
|
|
|
|
|
|
drop-ins don't carry the main configuration of a unit, hence read them
if we can't, complain if we cannot, but don't fail.
|
|
because it is missing
After all, we want to be able to boot with /etc empty one day...
|
|
This undoes part of commit e6a4a517befe559adf6d1dbbadf425c3538849c9.
Instead of removing the error message about non-empty journal bind mount
directories, simply downgrade the message to a warning and proceed.
|
|
Only accept cpu quota values in percentages, get rid of period
definition.
It's not clear whether the CFS period controllable per-cgroup even has a
future in the kernel, hence let's simplify all this, hardcode the period
to 100ms and only accept percentage based quota values.
|
|
|
|
Better be safe than sorry...
|
|
unescaped by parse_env_file()
|
|
dentry
Currently if nspawn was called with --link-journal=host or
--link-journal=auto and the right /var/log/journal/machine-id/ exists
then the bind mount the subdirectory into the container might fail due
to the ~/mycontainer/var/log/journal/machine-id/ of the container not
being empty.
There is no reason to check if the container journal subdir is empty
since there will be a bind mount on top of it. The user asked for a bind
mount so give it.
Note: a next call with --link-journal=guest may fail due to the
/var/log/journal/machine-id/ on the host not being empty.
https://bugs.freedesktop.org/show_bug.cgi?id=76193
Reported-by: Tobias Hunger <tobias.hunger@gmail.com>
|
|
This is the behaviour the kernel cgroup rework exposes for all
controllers, hence let's do this already now for all cases.
|
|
Introduce a (unsigned long) -1 as "unset" state for cpu shares/block io
weights, and keep the startup unit set around all the time.
|
|
Similar to CPUShares= and BlockIOWeight= respectively. However only
assign the specified weight during startup. Each control group
attribute is re-assigned as weight by CPUShares=weight and
BlockIOWeight=weight after startup. If not CPUShares= or
BlockIOWeight= be specified, then the attribute is re-assigned to each
default attribute value. (default cpu.shares=1024, blkio.weight=1000)
If only CPUShares=weight or BlockIOWeight=weight be specified, then
that implies StartupCPUShares=weight and StartupBlockIOWeight=weight.
|
|
This reverts commit 351efdc7a4d900a1aebca517dd0b46b89cdd7306.
|
|
|
|
This fallback will anyway never get tested, so rip it out.
|
|
|
|
for END
|
|
Thanks to Kay for tracking this down.
|
|
|
|
|
|
|
|
|
|
We shouldn't destroy IPC objects of system users on logout.
http://lists.freedesktop.org/archives/systemd-devel/2014-April/018373.html
This introduces SYSTEM_UID_MAX defined to the maximum UID of system
users. This value is determined compile-time, either as configure switch
or from /etc/login.defs. (We don't read that file at runtime, since this
is really a choice for a system builder, not the end user.)
While we are at it we then also update journald to use SYSTEM_UID_MAX
when we decide whether to split out log data for a specific client.
|
|
|
|
Use helper functions, and add some more sanity checking/asserts.
|
|
Similar to the previous patch, exchange a length and a pointer with only one offset variable.
Also fix the type of the options to be uint8_t[], rather than uint8_t*.
|
|
Store a pointer to the options in the DHCPMessage struct, and pass
this together with an offset around, rather than a uint8_t**.
This avoids us having to (re)compute the pointer; and changes
dhcp_option_append from adjusting both the pointer to the next
option and the remaining size of the options, to just adjusting
the current offset.
This makes the code a bit simpler to follow IMHO, but there should
be no functional change.
|
|
boot using this
This is useful to make sure the system clock stays monotonic even on
systems that lack an RTC.
Also, why we are at it, also use the systemd release time for bumping
the clock, since it's a slightly less bad than starting with jan 1st,
1970.
This also moves timesyncd into the early bootphase, in order to make
sure this initial bump is guaranteed to have finished by the time we
start real daemons which might write to the file systemd and thus
shouldn't leave 1970's timestamps all over the place...
|
|
If the udev queue is empty and "/run/udev/queue" does not exist,
"udevadm settle" would return with EXIT_FAILURE, because the inotify on
"/run/udev/queue" would fail with ENOENT.
This patch lets "udevadm settle" exit with EXIT_SUCCESS in this case.
|
|
This patch introduces sit tunnel support to networkd
Example conf:
file: sit.netdev
[NetDev]
Name=sit-tun
Kind=sit
MTUBytes=1480
[Tunnel]
Local=10.65.223.238
Remote=10.65.223.239
file: sit.network
[Match]
Name=em1
[Network]
Tunnel=sit-tun
[tomegun: rebased]
|
|
|
|
For now, we accept both link-local and routable addresses, maybe we want to
restrict ourselves to routable addresses only.
|
|
Expose states 'degraded' or 'routable' if a link has a site/link-local or a routable address, respectively.
|
|
|
