| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds configurational support for bond option.
Test conf:
bond.netdev
---
[NetDev]
Name=bond1
Kind=bond
[Bond]
ArpAllTargets=all
PrimaryReselect=better
ArpIntervalSec=10s
ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102
---
$cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 10000
ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
|
|
Add UDPCheckSum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx
options to enable sending zero checksums and receiving zero
checksums in VXLAN/IPv6
[tomegun: rebase manpage due to whitespace changes]
|
|
udevadm manual says:
A value of 0 will check if the queue is empty and always return
immediately.
However, currently we ignore the deadline if the value is 0, and wait
without any limit.
Zero timeout behaved according to the documentation until commit
ead7c62ab7 (udevadm: settle - kill alarm()). Looking at this patch, it
seems that the behavior change was unintended.
This patch restores the documented behavior.
|
|
|
|
|
|
These are useful for plain devices as they don't have any metadata by
themselves. Instead of using an unreliable hardcoded device name in crypttab
you can then put static metadata at the start of the partition for a stable
UUID or label.
https://bugs.freedesktop.org/show_bug.cgi?id=87717
https://bugs.debian.org/751707
https://launchpad.net/bugs/953875
|
|
Boolean arithmetic is great, use it!
if (a && !b)
return 1;
if (!a && b)
return -1,
is equivalent to
if (a != b)
return a - b;
Furthermore:
r = false;
if (condition)
r = true;
is equivalent to:
r = condition;
|
|
sd_device_new_from_* now returns -ENODEV when the device does not exist, and the enumerator
silently drops these errors as missing devices is exepected.
|
|
It is still possible to include uninitialized ones, but now that is opt-in. In most
cases people only want initialized devices. Exception is if you want to work without
udev running.
Suggested by David Herrmann.
|
|
This is rarely, if ever, used. Drop it from the new public API and only keep it for
the legacy API.
Suggested by David Herrmann.
|
|
|
|
|
|
This should not be used for any new code, as we don't set errno in new code,
but there are several legacy users, so let's keep it in shared.
|
|
|
|
The key was parsed properly, but the warning was still generated.
|
|
Fix for 4beac74e69.
Thanks, Ronny!
|
|
When selinux calls our callback with a log message, it specifies the
type as AVC or INFO/WARNING/ERROR. The question is how to map this to
audit types and/or log priorities. SELINUX_AVC maps to AUDIT_USER_AVC
reasonably, but for the other messages we have no idea, hence we use
AUDIT_USER_AVC for everything. When not using audit logging, we can
map those selinux levels to LOG_INFO/WARNING/ERROR etc.
Also update comment which was not valid anymore in light of journald
sucking in audit logs, and was actually wrong from the beginning —
libselinux uses the callback for everything, not just avcs.
This stemmed out of https://bugzilla.redhat.com/show_bug.cgi?id=1195330,
but does not solve it.
|
|
We actually only use the journal when showing status. Move setrlimit call
so it is only called for status.
https://bugzilla.redhat.com/show_bug.cgi?id=1184712
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=89885
|
|
The Trust TB7300 (relabelled Waltop?) tablet has a scrollwheel which shows
up as a /dev/input/event# node all by itself. Currently input_id does not
set any ID_INPUT_FOO attr on this causing it it to not be recognized by
Xorg / libinput.
This commit fixes this by marking it with ID_INPUT_KEY.
Reported-by: Sjoerd Timmer <themba@randomdata.nl>
|
|
Make test_pointer / test_keys return a boolean indicating whether or not
they've set any properties on the device.
|
|
Remove whitespaces before opening parentheses, mostly before test_bit.
|
|
shuts up valgrind/sanitizers
|
|
access modes or ownership
|
|
CID #996297.
|
|
This shouldn't really fail and anyway not much we can do about it.
CID #996292, #996294, #996295.
|
|
CID #996284.
|
|
|
|
|
|
This code appears to follow the following convention:
- all errors are logged at point of origin
- oom errors abort execution, non-oom errors are logged but
execution continues.
Make sure all ooms result in a log message, and remove warning which could
not be reached. Downgrade non-fatal errors to warnings.
|
|
No functional change intended. Just splitting this out to make
it easier to edit in the future.
|
|
compuler figure that out...
|
|
|
|
A stateless system has a tmpfs as root file system. That obviously
does not have any block device associated with it. So try falling back
to the device of the /usr filesystem if the root filesystem fails.
|
|
Just a couple of trivial oversights.
|
|
/boot does not exist on a stateless system, so do not get
confused by that.
|
|
We are talking about one member of a group of things (resource limits, signals,
timeouts), without specifying which one. An indenfinite article is in order.
When we are talking about the control process, it's a specific one, so the
definite article is used.
|
|
Followup for 7a03974a6f.
|
|
- No need to add "Error, " prefix, we already have that as metadata.
- Also use double quotes for path names, as in most other places.
- Remove stray newline at end of message.
- Downgrade error messages after which we continue to warnings.
|
|
|
|
|
|
Whenever we provide a bus API that allows clients to create and manage
server-side objects, we need to provide a unique name for these objects.
There are two ways to provide them:
1) Let the server choose a name and return it as method reply.
2) Let the client pass its name of choice in the method arguments.
The first method is the easiest one to implement. However, it suffers from
a race condition: If a client creates an object asynchronously, it cannot
destroy that object until it received the method reply. It cannot know the
name of the new object, thus, it cannot destroy it. Furthermore, this
method enforces a round-trip. If the client _depends_ on the method call
to succeed (eg., it would close() the connection if it failed), the client
usually has no reason to wait for the method reply. Instead, the client
can immediately schedule further method calls on the newly created object
(in case the API guarantees in-order method-call handling).
The second method fixes both problems: The client passes an object name
with the method-call. The server uses it to create the object. Therefore,
the client can schedule object destruction even if the object-creation
hasn't finished, yet (again, requiring in-order method-call handling).
Furthermore, the client can schedule further method calls on the newly
created object, before the constructor returned.
There're two problems to solve, though:
1) Object names are usually defined via dbus object paths, which are
usually globally namespaced. Therefore, multiple clients must be able
to choose unique object names without interference.
2) If multiple libraries share the same bus connection, they must be
able to choose unique object names without interference.
The first problem is solved easily by prefixing a name with the
unique-bus-name of a connection. The server side must enforce this and
reject any other name.
The second problem is solved by providing unique suffixes from within
sd-bus. As long as sd-bus always returns a fresh new ID, if requested,
multiple libraries will never interfere. This implementation re-uses
bus->cookie as ID generator, which already provides unique IDs for each
bus connection.
This patch introduces two new helpers:
bus_path_encode_unique(sd_bus *bus,
const char *prefix,
const char *sender_id,
const char *external_id,
char **ret_path);
This creates a new object-path via the template
'/prefix/sender_id/external_id'. That is, it appends two new labels to
the given prefix. If 'sender_id' is NULL, it will use
bus->unique_name, if 'external_id' is NULL, it will allocate a fresh,
unique cookie from bus->cookie.
bus_path_decode_unique(const char *path,
const char *prefix,
char **ret_sender,
char **ret_external);
This reverses what bus_path_encode_unique() did. It parses 'path' from
the template '/prefix/sender/external' and returns both suffix-labels
in 'ret_sender' and 'ret_external'. In case the template does not
match, 0 is returned and both output arguments are set to NULL.
Otherwise, 1 is returned and the output arguments contain the decoded
labels.
Note: Client-side allocated IDs are inspired by the Wayland protocol
(which itself was inspired by X11). Wayland uses those IDs heavily
to avoid round-trips. Clients can create server-side objects and
send method calls without any round-trip and waiting for any object
IDs to be returned. But unlike Wayland, DBus uses gobally namespaced
object names. Therefore, we have to add the extra step by adding the
unique-name of the bus connection.
|
|
This is like bus_label_unescape() but takes a maximum length instead of
relying on NULL-terminated strings. This is highly useful to unescape
labels that are not at the end of a path.
|
