summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-06-18sd-dhcp-server: fix a leakThomas Hindoe Paaboel Andersen
We must use free instead of dhcp_lease_free here to avoid freeing client_id.data.
2014-06-18networkd: configure dhcp server range only after successfully setting an IP ↵Lennart Poettering
address on the interface This way we can make use of the addresses of the IP pool.
2014-06-18networkd: add address pool supportLennart Poettering
When an address is configured to be all zeroes, networkd will now automatically find a locally unused network of the right size from a list of pre-configured pools. Currently those pools are 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 and fc00::/7, i.e. the network ranges for private networks. They are compiled in, but should be configurable eventually. This allows applying the same configuration to a large number of interfaces with each time a different IP range block, and management of these IP ranges is fully automatic. When allocating an address range from the pool it is made sure the range is not used otherwise.
2014-06-18networkd: add a number of calls to manipulate in_addr_union structsLennart Poettering
2014-06-18socket-util: introduce in_addr_union similar to sockaddr_union and make use ↵Lennart Poettering
of it everywhere
2014-06-18dhcp-network: remove TODOMichal Sekletar
There is no need to explicitly check version of L3 protocol in the ethernet header because we bind socket with .sll_protocol set to ETH_P_IP, thus we only receive IPv4 packets on the socket.
2014-06-18cryptsetup: introduce new cryptsetup-pre.traget unit so that services can ↵Lennart Poettering
make sure they are started before and stopped after any LUKS setup https://bugzilla.redhat.com/show_bug.cgi?id=1097938
2014-06-18tmpfiles: create directories already with the right label, instead of ↵Lennart Poettering
creating them first, and relabeling them afterwards
2014-06-18tmpfiles: w lines should allow following symlinksLennart Poettering
2014-06-18namespace: properly label device nodes we createLennart Poettering
https://bugzilla.redhat.com/show_bug.cgi?id=1081429
2014-06-18tmpfiles: add "+" modifier support to b, c, p lines in addition to LLennart Poettering
2014-06-17networkd: veth - fix parsing verificationTom Gundersen
2014-06-17networkd: vxlan - fix parsing verificationTom Gundersen
2014-06-17networkd: veth - fix memleakTom Gundersen
2014-06-17install: remove unused variableThomas Hindoe Paaboel Andersen
2014-06-17bootchart: set white backgroundFrederic Crozat
In programs like eog and gimp the transparant background did not look very good. Similar fix from the one done in systemd-analyze (418e3750)
2014-06-17networkd: link - fix carrier check on new linkTom Gundersen
We were comparing against our own internal enum rather than the kernel exposed one. Found by Thomas Ritter.
2014-06-17sd-dhcp: checksum - make endianess-neutralTom Gundersen
For efficiency, we group bytes together before adding them up. This is guaranteed to always work (regardless of the byte order) as long as the i-th byte in each group lign up with the i-th byte in each other group. On big-endian machines this broke when handling the trailing few bytes which did not make up a full group of 4 bytes. This patch fixes the problem by explicitly creating a 4 byte zero-padded group out of the trailing bytes. Reported and tested by Thomas Ritter <th.ritter@gmx.at>.
2014-06-16systemctl: reverse order of args when verbosely creating symlinksDave Reisner
This was backwards. The symlink itself points to the source unit, not the other way around.
2014-06-17core: populate unit file set with preset data if we boot with empty /etcLennart Poettering
2014-06-17machine-id-setup: allow passing NULL as function argument, for simplicityLennart Poettering
2014-06-17kmod: conditionalize kmod setup on CAP_SYS_MODULE, not whether we run in a ↵Lennart Poettering
container It's generally preferrable to conditionalize on the actual ability to do something then the context we run in.
2014-06-17install: improve paths we show the user when enabling/disablingLennart Poettering
2014-06-17conf-files: fix when for --root= logicLennart Poettering
This is based on parts of similar patches from Michael Marineau and Lukas Nykrin, but simply uses strappenda3().
2014-06-17systemctl: output human readable strings in "systemctl enable" and ↵Lennart Poettering
"systemctl disable"
2014-06-17install: simplify symlink --root= logicLennart Poettering
2014-06-17install: "systemctl enable" should be a nop for template units lacking a ↵Lennart Poettering
DefaultInstance= setting
2014-06-17log: don't downgrade log level in non-PID 1 if "quiet" is passed on kernel ↵Lennart Poettering
cmdline "debug" should apply to all tools, but "quiet" only to PID1.
2014-06-17install: make sure that --root= mode doesn't make us consider all units ↵Lennart Poettering
outside of search path
2014-06-17install: make sure "systemctl disable foobar@.service" actually removes all ↵Lennart Poettering
instances
2014-06-17install: introduce new DefaultInstance= field for [Install] sectionsLennart Poettering
The DefaultInstance= name is used when enabling template units when only specifying the template name, but no instance. Add DefaultInstance=tty1 to getty@.service, so that when the template itself is enabled an instance for tty1 is created. This is useful so that we "systemctl preset-all" can work properly, because we can operate on getty@.service after finding it, and the right instance is created.
2014-06-17install: when looking for a unit file for enabling, search for templates ↵Lennart Poettering
only after traversing all search directories Let's always make sure to look in all search directories for the full unit names first, before looking for templates for them.
2014-06-17install: use symlink_atomic() instead of unlink()+symlink() when force ↵Lennart Poettering
creating a symlink
2014-06-17install: various modernizationsLennart Poettering
2014-06-17install: teach preset query logic --root= supportLennart Poettering
2014-06-17install: beef up preset logic to limit to only enable or only disable, and ↵Lennart Poettering
do all-unit preset operations The new "systemctl preset-all" command may now be used to put all installed units back into the enable/disable state the vendor/admin encoded in preset files. Also, introduce "systemctl --preset-mode=enable-only" and "systemctl --preset-mode=disable-only" to only apply the enable or only the disable operations of a "systemctl preset" or "systemctl preset-all" operation. "systemctl preset-all" implements this RFE: https://bugzilla.redhat.com/show_bug.cgi?id=630174
2014-06-17install: simplify and clarify disabling logic for instanced unitsLennart Poettering
2014-06-17install: various modernizationsLennart Poettering
2014-06-17unit-name: various modernizationsLennart Poettering
2014-06-17unit-name: fix detection of unit templates/instancesLennart Poettering
We need to check for the last dot, not the first one in a unit name, for the suffix. Correct that.
2014-06-16journal-remote: fix memleakThomas Hindoe Paaboel Andersen
2014-06-16tests: unlink temp file used in testRonny Chevalier
2014-06-16tests: add tests to test-hashmapRonny Chevalier
add tests for: - hashmap_remove_and_put - hashmap_first_key - hashmap_last - hashmap_steal_first_key - hashmap_clear_free_free
2014-06-16tests: add test-fdsetRonny Chevalier
2014-06-16tests: add test-socket-utilRonny Chevalier
2014-06-16networkd: unref tunnelSusant Sahani
Unref tunnel while shutting down
2014-06-16networkd: introduce vxlanSusant Sahani
This patch enables netwokd to create vxlan Changes: Added: 1. File networkd networkd-vxlan.c 2. to netdev bool learning struct in_addr group uint64_t vxlanid; 3. VXLAN subsection and config parameters
2014-06-16networkd: rename netdev variablesSusant Sahani
Rename the netdev variables. Remove tunnel_ so that it can be reused .
2014-06-16sd-rtnl: add support for vxlan rtnl attributesSusant Sahani
This patch adds vxlan rtnl attributes to sd-rtnl
2014-06-16bus-proxy: policy - ignore unsupported tags and attributesKay Sievers