summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-05-05Trivial network cleanup (#3196)Thomas H. P. Andersen
* gitignore: typo fix for test-networkd-conf * networkd: fix double include
2016-05-04Merge pull request #3156 from keszybz/duid-settingsLennart Poettering
Rework DUID setting
2016-05-04treewide: fix typos (#3187)Torstein Husebø
2016-05-04Merge pull request #3170 from poettering/v230-preparation-fixesLennart Poettering
make virtualization detection quieter, rework unit start limit logic, detect unit file drop-in changes correctly, fix autofs state propagation
2016-05-03Merge pull request #3185 from NetworkManager/lr/unhappy-trieZbigniew Jędrzejewski-Szmek
Fix incorrect string deduplication in udev
2016-05-03strbuf: set the proper character when creating new nodesLubomir Rintel
Commit 82501b3fc added an early break when a terminal node is found to incorrect place -- before setting c. This caused trie to be built that does not correspond to what it points to in buffer, causing incorrect deduplications: # cat /etc/udev/rules.d/99-bug.rules ENV{FOO}=="0" ENV{xx0}=="BAR" ENV{BAZ}=="00" # udevadm test * RULE /etc/udev/rules.d/99-bug.rules:1, token: 0, count: 2, label: '' M ENV match 'FOO' '0'(plain) * RULE /etc/udev/rules.d/99-bug.rules:2, token: 2, count: 2, label: '' M ENV match 'xx0' 'BAR'(plain) * RULE /etc/udev/rules.d/99-bug.rules:3, token: 4, count: 2, label: '' M ENV match 'BAZ' 'x0'(plain) * END The addition of "xx0" following "0" will cause a trie like this to be created: c=\0 c=0 "0" c=0 "xx0" <-- note the c is incorrect here, causing "00" to be c=O "FOO" deduplicated to it c=R "BAR" This in effect caused the usb_modeswitch rule for Huawei modems to never match and this never be switched to serial mode from mass storage.
2016-05-03udev: fix build with DEBUG=1Lubomir Rintel
Alternatively, this could perhaps be removed since it was broken for a long time and noone seemed to care. But it was helpful for me today.
2016-05-03Merge pull request #3183 from crawford/preset-arrayZbigniew Jędrzejewski-Szmek
install: cache the presets before evaluating
2016-05-03networkd: Add support to configure IPv6 preferred lifetime (#3102)Susant Sahani
Closes #2166. We only allow 0, infinity and forever. infinity and forever is same.
2016-05-03Merge pull request #3132 from ssahani/route-tableZbigniew Jędrzejewski-Szmek
networkd: add support to set route table
2016-05-03Merge pull request #3173 from poettering/dnssec-incapdns-fixZbigniew Jędrzejewski-Szmek
Dnssec incapdns fix
2016-05-03install: cache the presets before evaluatingAlex Crawford
The previous implementation traversed the various config directories, walking the preset files and parsing each line to determine if a service should be enabled or disabled. It did this for every service which resulted in many more file operations than neccessary. This approach parses each of the preset entries into an array which is then used to check if each service should be enabled or disabled.
2016-05-03test-dnssec: drop unused variableLennart Poettering
(zjs: the tree is now back to 0b2abe0f034f7f2d8654adb11b516d1090ec9a9c.)
2016-05-03Merge pull request #2921 from keszybz/do-not-report-masked-units-as-changedZbigniew Jędrzejewski-Szmek
2016-05-03Revert "Do not report masked units as changed (#2921)"Zbigniew Jędrzejewski-Szmek
This reverts commit 6d10d308c6cd16528ef58fa4f5822aef936862d3. It got squashed by mistake.
2016-05-03Revert "test-dnssec: drop unused variable"Zbigniew Jędrzejewski-Szmek
This reverts commit 0bed31c1038c439cc5956fb44017ba28e503095b.
2016-05-03Merge pull request #3111 from poettering/nspawn-remove-vethZbigniew Jędrzejewski-Szmek
2016-05-03Revert "nspawn: explicitly remove veth links after use (#3111)"Zbigniew Jędrzejewski-Szmek
This reverts commit d2773e59de3dd970d861e9f996bc48de20ef4314. Merge got squashed by mistake.
2016-05-03networkd: add support to set route tableSusant Sahani
networkd: add support to set route table 1. add support to configure the table id. if id is less than 256 we can fit this in the header of route as netlink property is a char. But in kernel this proepty is a unsigned 32. Hence if greater that 256 add this as RTA_TABLE attribute. 2. we are not setting the address family now. Now set this property.
2016-05-03sd-netlink: introduce route attribute set APISusant Sahani
Introduce 1. sd_rtnl_message_route_set_table to set table ID 2. sd_rtnl_message_route_set_family to set family Both required to configure route properties.
2016-05-03sd-netlink: fix sd_netlink_message_append_dataSusant Sahani
Also remove the braces add_rtattr not required.
2016-05-03network: get rid of DUID_TYPE_RAWZbigniew Jędrzejewski-Szmek
It wasn't used for anything after the recent changes.
2016-05-03test-networkd-conf: add tests for the parsing functionsZbigniew Jędrzejewski-Szmek
2016-05-03networkd: rework duid_{type,duid_type,duid,duid_len} settingZbigniew Jędrzejewski-Szmek
Separate fields are replaced with a struct. Second second duid type field is removed. The first field was used to carry the result of DUIDType= configuration, and the second was either a copy of this, or contained the type extracted from DuidRawData. The semantics are changed so that the type specified in DUIDType is always used. DUIDRawData= no longer overrides the type setting. The networkd code is now more constrained than the sd-dhcp code: DUIDRawData cannot have 0 length, length 0 is treated the same as unsetting. Likewise, it is not possible to set a DUIDType=0. If it ever becomes necessary to set type=0 or a zero-length duid, the code can be changed to support that. Nevertheless, I think that's unlikely. This addresses #3127 § 1 and 3. v2: - rename DUID.duid, DUID.duid_len to DUID.raw_data, DUID.raw_data_len
2016-05-03dh-dhcp{,6}-client: change the semantics of DUID settingZbigniew Jędrzejewski-Szmek
Both versions of the code are changed to allow the caller to override DUID using simple rules: duid type and value may be specified, in which case the caller is responsible to providing the contents, or just duid type may be specified as DUID_TYPE_EN, in which case we we fill in the values. In the future more support for other types may be added, e.g. DUID_TYPE_LLT. There still remains and ugly discrepancy between dhcp4 and dhcp6 code: dhcp6 has sd_dhcp6_client_set_duid and sd_dhcp6_client_set_iaid and requires client->state to be DHCP6_STATE_STOPPED, while dhcp4 has sd_dhcp_client_set_iaid_duid and will reconfigure the client if it is not stopped. This commit doesn't touch that part. This addresses #3127 § 2.
2016-05-03dhcp-identifier: un-inline dhcp_validate_duid_lenZbigniew Jędrzejewski-Szmek
After all it is used in more than one place and is not that short. Also tweak the test a bit: - do not check that duid_len > 0, because we want to allow unknown duid types, and there might be some which are fine with 0 length data, (also assert should not be called from library code), - always check that duid_len <= MAX_DUID_LEN, because we could overwrite available buffer space otherwise.
2016-05-03sd-dhcp: change uint8_t *duid to const void*Zbigniew Jędrzejewski-Szmek
2016-05-03sd-dhcp{,6}-client: use standard indentation for functions argsZbigniew Jędrzejewski-Szmek
2016-05-02locale: Language fallbacks for fr_(BE|CA|CH|LU) to fr_FR (#3178)Sylvain Plantefève
2016-05-02Merge pull request #3162 from keszybz/alias-refusalLennart Poettering
Refuse Alias, DefaultInstance, templated units in install (as appropriate)
2016-05-02Merge pull request #3153 from poettering/async-cloneZbigniew Jędrzejewski-Szmek
machined: make "clone" asynchronous, and support copy-based fall-back
2016-05-02resolved: work around broken DNS zones set up by incapdns.netLennart Poettering
incapdns.net returns NXDOMAIN for the SOA of the zone itself but is not a terminal. This is against the specs, but we really should be able to deal with this. Previously, when verifying whether an NXDOMAIN response for a SOA/NS lookup is rightfully unsigned we'd issue a SOA lookup for the parent's domain, to derive the state from that. If the parent SOA would get an NXDOMAIN, we'd continue upwards, until we hit a signed top-level domain, which suggests that the domain actually exists. With this change whenver we need to authenticate an NXDOMAIN SOA reply, we'll request the DS RR for the zone first, and use for validation, since that this must be from the parent's zone, not the incorrect lower zone. Fixes: #2894
2016-05-02automount: move resetting of expiry timeout to automount_set_state()Lennart Poettering
that way we can be sure that there's no expiry timeout in place at any time when we aren't in the RUNNING state.
2016-05-02automount: rework propagation between automount and mount unitsLennart Poettering
Port the progagation logic to the generic Unit->trigger_notify() callback logic in the unit vtable, that is called for a unit not only when the triggered unit of it changes state but also when a job for that unit finishes. This, firstly allows us to make the code a bit cleaner and more generic, but more importantly, allows us to notice correctly when a mount job fails, and propagate that back to autofs client processes. Fixes: #2181
2016-05-02core: don't propagate service state to sockets as long as there's still a ↵Lennart Poettering
job for the service queued
2016-05-02fstab-generator: add newline before we start a new unit file sectionLennart Poettering
We already did this for the [Mount] section, let's do the same for [Automount].
2016-05-02automount: add debug message when we get notified about mount state changesLennart Poettering
2016-05-02core: remove duplicate code in automount_update_mount()Lennart Poettering
Also, fix indentation.
2016-05-02core: simplify unit_need_daemon_reload() a bitLennart Poettering
And let's make it more accurate: if we have acquire the list of unit drop-ins, then let's do a full comparison against the old list we already have, and if things differ in any way, we know we have to reload. This makes sure we detect changes to drop-in directories in more cases.
2016-05-02core: fix detection whether per-unit drop-ins changedLennart Poettering
This fixes fall-out from 6d10d308c6cd16528ef58fa4f5822aef936862d3. Until that commit, do determine whether a daemon reload was required we compare the mtime of the main unit file we loaded with the mtime of it on disk for equality, but for drop-ins we only stored the newest mtime of all of them and then did a "newer-than" comparison. This was brokeni with the above commit, when all checks where changed to be for equality. With this change all checks are now done as "newer-than", fixing the drop-in mtime case. Strictly speaking this will not detect a number of changes that the code before above commit detected, but given that the mtime is unlikely to go backwards, and this is just intended to be a helpful hint anyway, this looks OK in order to keep things simple. Fixes: #3123
2016-05-02core: move enforcement of the start limit into per-unit-type code againLennart Poettering
Let's move the enforcement of the per-unit start limit from unit.c into the type-specific files again. For unit types that know a concept of "result" codes this allows us to hook up the start limit condition to it with an explicit result code. Also, this makes sure that the state checks in clal like service_start() may be done before the start limit is checked, as the start limit really should be checked last, right before everything has been verified to be in order. The generic start limit logic is left in unit.c, but the invocation of it is moved into the per-type files, in the various xyz_start() functions, so that they may place the check at the right location. Note that this change drops the enforcement entirely from device, slice, target and scope units, since these unit types generally may not fail activation, or may only be activated a single time. This is also documented now. Note that restores the "start-limit-hit" result code that existed before 6bf0f408e4833152197fb38fb10a9989c89f3a59 already in the service code. However, it's not introduced for all units that have a result code concept. Fixes #3166.
2016-05-02util: don't dump /proc/cpuinfo contents in debug infoLennart Poettering
This is hardly useful, it's trivial for developers to get that info by running cat /proc/cpuinfo. Fixes #3155
2016-05-02machinectl: since clone/remove/copy verbs are possibly slow, turn off bus ↵Lennart Poettering
call timeout By default we timeout all bus calls, but if we know that these bus calls might be slow, let's explicitly turn the timeouts off.
2016-05-02machined: rework copy-from/copy-to operation to use generic Operation objectLennart Poettering
With this all potentially slow operations are done out-of-process, asynchronously, using the same "Operation" object.
2016-05-02machined: also make image removal operation asynchronousLennart Poettering
If we remove a directory image (i.e. not a btrfs snapshot) then things might get quite expensive, hence run this asynchronous in a forked off process, too.
2016-05-02machined: support non-btrfs file systems with "machinectl clone"Lennart Poettering
Fall back to a normal copy operation when the backing file system isn't btrfs, and hence doesn't support cheap snapshotting. Of course, this will be slow, but given that the execution is asynchronous now, this should be OK. Fixes: #1308
2016-05-02tree-wide: fix invocations of chattr_path()Lennart Poettering
chattr_path() takes two bitmasks, and no booleans. Fix the various invocations to do this properly.
2016-05-02copy: adjust directory times after writing to the directoryLennart Poettering
When recursively copying a directory tree, fix up the file times after having created all contents in it, so that our changes don't end up altering any of the directory times.
2016-05-02copy: return the right error when we can't open a fileLennart Poettering
2016-05-02image: enable btrfs quotas on the clone destination, not the sourceLennart Poettering