summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-01-06journal-upload: enable curl debug output conditionallyZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=86464
2015-01-06build-sys: add two more missing makefile linksLennart Poettering
2015-01-06machined: simplificationLennart Poettering
2015-01-06journald: allow restarting journald without losing stream connectionsLennart Poettering
Making use of the fd storage capability of the previous commit, allow restarting journald by serilizing stream state to /run, and pushing open fds to PID 1.
2015-01-06core: add new logic for services to store file descriptors in PID 1Lennart Poettering
With this change it is possible to send file descriptors to PID 1, via sd_pid_notify_with_fds() which PID 1 will store individually for each service, and pass via the usual fd passing logic on next invocation. This is useful for enable daemon reload schemes where daemons serialize their state to /run, push their fds into PID 1 and terminate, restoring their state on next start from the data in /run and passed in from PID 1. The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on them, and the service they belong to are either not dead or failed, or have a job queued.
2015-01-05cgroup: memory limits on / are not supportedZbigniew Jędrzejewski-Szmek
2015-01-05cgroup: fix error messageZbigniew Jędrzejewski-Szmek
systemd[1]: Failed to set memory.limit_in_bytes on : Invalid argument
2015-01-05journal: call connect() with dropped privilegesZbigniew Jędrzejewski-Szmek
When systemd starts a service, it first opened /run/systemd/journal/stdout socket, and only later switched to the right user.group (if they are specified). Later on, journald looked at the credentials, and saw root.root, because credentials are stored at the time the socket is opened. As a result, all messages passed over _TRANSPORT=stdout were logged with _UID=0, _GID=0. Drop real uid and gid temporarily to fix the issue.
2015-01-05core: rework counting of running jobsLennart Poettering
Let's unify the code that counts the running jobs a bit, in order to make sure we are less likely to miss one. This is related to this bug: https://bugs.freedesktop.org/show_bug.cgi?id=87349 However, it probably won't fix it fully, and I cannot reproduce the issue. The change also adds an explicit assert change when the counter is off.
2015-01-05path-lookup, systemctl: export lookup_paths_init_from_scope() from ↵Ivan Shapovalov
shared/install.c and use it
2015-01-05tmpfiles: fix 'D' linesLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=87953
2015-01-05nss-myhostname: always will in canonical hostname field when resolving ↵Lennart Poettering
addresses to hostnames https://bugs.freedesktop.org/show_bug.cgi?id=87634
2015-01-05bus-proxyd: don't allow to acquire org.freedesktop.DBus nameLukasz Skalski
2015-01-05core: fix typo in log messageMichael Biebl
2015-01-05machinectl: remove spurious newlineLennart Poettering
2015-01-05sd-bus: sync kdbus.hDaniel Mack
Catch up with latest changes in kdbus.ko: * Signals can be sent as unicast now, hence they need to be marked as such with the KDBUS_MSG_SIGNAL in the message flags. * Follow ioctl number change for KDBUS_CMD_FREE
2015-01-05util: Do not clear parent mount flags when setting up namespacesTopi Miettinen
When setting up a namespace, mount flags like noexec, nosuid and nodev are cleared, so the mounts always have exec, suid and dev flags enabled. Copy source directory mount flags to target mount when remounting the bind mounts.
2015-01-05udevadm,..: make --help output of udev tools more like the output of the ↵Lennart Poettering
various other tools
2015-01-05fstab-generator: use more appropriate checks for swap and device availabilityLennart Poettering
We always should use the same checks when deciding whether swap support and mounting of devices is supported. Hence, let's make fstab-generator's logic more similar to the usual logic we follow: a) Look for /proc/swaps and no container support before activating swaps. b) Look for /sys being writable befire supporting device mounts.
2015-01-05libsystemd-network: fix typo in lldpTorstein Husebø
2015-01-05util: Fix signedness error in lines(), match implementationsColin Walters
Regression introduced by ed757c0cb03eef50e8d9aeb4682401c3e9486f0b Mirror the implementation of columns(), since the fd_columns() functions returns a negative integer for errors. Also fix columns() to return the unsigned variable instead of the signed intermediary (they're the same, but better to be explicit).
2015-01-05journald: reuse IOVEC_TOTAL_SIZE() macros where possibleLennart Poettering
2015-01-05journald: when we detect the journal file we are about to write to has been ↵Lennart Poettering
deleted, rotate https://bugzilla.redhat.com/show_bug.cgi?id=1171719
2015-01-05systemctl: properly iterate through service array when dispatching to sysvLennart Poettering
https://bugzilla.redhat.com/show_bug.cgi?id=1175734
2015-01-05journald: add some additional checks before we divide by values read from ↵Lennart Poettering
journal file headers Since the file headers might be replaced by zeroed pages now due to sigbus we should make sure we don't end up dividing by zero because we don't check values read from journal file headers for changes.
2015-01-05journalctl: static variables immediately configured via command line ↵Lennart Poettering
arguments should be prefixed with "arg_"
2015-01-05journal: install sigbus handler for journal tools tooLennart Poettering
This makes them robust regarding truncation. Ideally, we'd export this as an API, but given how messy SIGBUS handling is, and the uncertain ownership logic of signal handlers we should not do this (unless libc one day invents a scheme how to sanely install SIGBUS handlers for specific memory areas only). However, for now we can still make all our own tools robust. Note that external tools will only have read-access to the journal anyway, where SIGBUS is much more unlikely, given that only writes are subject to disk full problems.
2015-01-05systemctl: fix waiting for jobs when using direct connections to PID 1 for dbusLennart Poettering
2015-01-05journald: constify all thingsLennart Poettering
2015-01-05machined,bus-proxy: fix connecting to containersLennart Poettering
2015-01-05journald: prefix exported calls with "server_", unexport unnecessary callsLennart Poettering
2015-01-05journald: process SIGBUS for the memory maps we set upLennart Poettering
Even though we use fallocate() it appears that file systems like btrfs will trigger SIGBUS on certain low-disk-space situation. We should handle that, hence catch the signal, add it to a list of invalidated pages, and replace the page with an empty memory area. After each write check if SIGBUS was triggered, and consider the write invalid if it was. This should make journald a lot more robust with file systems where fallocate() is not reliable, for example all CoW file systems (btrfs...), where changing written data can fail with disk full errors. https://bugzilla.redhat.com/show_bug.cgi?id=1045810
2015-01-05nspawn: mount most of the cgroup tree read-only in nspawn containers except ↵Lennart Poettering
for the container's own subtree in the name=systemd hierarchy More specifically mount all other hierarchies in their entirety and the name=systemd above the container's subtree read-only.
2015-01-05cgroup: downgrade log messages when we cannot write to cgroup trees that are ↵Lennart Poettering
mounted read-only
2015-01-02machinectl: Check type instead of path before printing the typeThomas Hindoe Paaboel Andersen
Looks like a typo when introduced in fefdc04b38725457a91651218feb7000f6ccc1f4
2015-01-01mount: do not use -n when running in --user modeZbigniew Jędrzejewski-Szmek
-n is only allowed for root. /etc/mtab is nowadays almost always a link to /proc/, so in practice this does not really matter too much, but should allow .mount units to work in --user mode. https://bugs.freedesktop.org/show_bug.cgi?id=87602
2015-01-01Type of mount(2) flags is unsigned longTopi Miettinen
2015-01-01udev: improve help/usage for some more programsRobert Milasan
2015-01-01networkctl: avoid potential use of unitialized variablesZbigniew Jędrzejewski-Szmek
Those values are based on a file we read from disk, so we should verify everything we receive, and make sure everything we print is sensible. Also, print fractional seconds for TTL.
2015-01-01networkctl: remove unused variableZbigniew Jędrzejewski-Szmek
2015-01-01network: fix scanf/printf formatZbigniew Jędrzejewski-Szmek
usec_t is defined as 64 bit wide, but long is 32 bit on many archs.
2015-01-01missing: add __NR_renameat2Zbigniew Jędrzejewski-Szmek
2015-01-01Remove "to allow" from policy messagesZbigniew Jędrzejewski-Szmek
It carries no additional information and forces a passive sentence structure which is longer and harder to parse.
2015-01-01machined: fix grammar in org.freedesktop.machine1.policy.inPiotr Drąg
[zj: change "in into" to "into".] https://bugs.freedesktop.org/show_bug.cgi?id=87722
2014-12-31lldp: fix sd_lldp_save()David Herrmann
Fix a bunch of needless memzero() calls, a bunch of use-after-free regarding _cleanup_free_ and drop unused variables. Hint: Do NOT use _cleanup_free_ for temporary strappend() helpers that are freed multiple times. All you safe is the last free() call, which is really not worth the trouble resetting it to NULL all the time.
2014-12-31lldp: fix uninitialized cleanup var #2David Herrmann
Another uninitialized variable marked as _cleanup_. Set it to NULL to avoid accessing uninitialized memory.
2014-12-31lldp: fix uninitialized cleanup varDavid Herrmann
Make sure to set _cleanup_ variables to NULL. Otherwise, we free uninitialized objects.
2014-12-31import: fix mem-leak in CurlGlueDavid Herrmann
Make sure to actually free the underlying object in CurlGlue unref.
2014-12-31lldp: fix double freeDavid Herrmann
'k' is marked as _cleanup_free_ so reset it to NULL if we free it explicitly.
2014-12-31networkctl: fix strappend() error checkingDavid Herrmann
Make sure to test the right variable for NULL.