summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-12-10scope: make attachment of initial PIDs a bit more robustLennart Poettering
2014-12-10core: don't migrate PIDs for units that may contain subcgroups, do this only ↵Lennart Poettering
for leaf units Otherwise a slice or delegation unit might move PIDs around ignoring the fact that it is attached to a subcgroup.
2014-12-10core: properly pass unit file state to clients via the busLennart Poettering
2014-12-10sd-bus: make BUS_ERROR_MAP_ELF_USE() use a const variableLennart Poettering
2014-12-10networkd: rename section [BridgePort] → [Bridge]Lennart Poettering
Let's stick to generic sections that describe the general technology, instead of specific per-object sections, unless we really have a reason to do that otherwise.
2014-12-10sd-bus: move common errors src/shared/bus-errors.h → ↵Lennart Poettering
src/libsystemd/sd-bus/bus-common-errors.h Stuff in src/shared/ should not use stuff from src/libsystemd/ really.
2014-12-10networkd-dhcp6: Support ICMPv6 Other informationPatrik Flykt
When ICMPv6 Other information is received, enable Information request in DHCPv6. If the DHCPv6 client already exists, only update the client if there is a transition from Other to Managed state.
2014-12-10networkd-dhcp6: Move ICMPv6 and DHCPv6 configuration to new filePatrik Flykt
Handle all aspects of ICMPv6 and DHCPv6 in a file of its own as is done with DHCPv4 and IPv4LL.
2014-12-10test-dhcp6-client: Add a simple Information Request test casePatrik Flykt
Start the DHCPv6 test case by sending an Information Request, verifying the reply and continuing at once with the normal address acquisition procedure. Reuse the DHCPv6 Solicit Reply so that the client code is verified to ignore any erroneously added IPv6 address information.
2014-12-10sd-dhcp6-client: Implement Information Request messagePatrik Flykt
Implement Information Request message according to RFC 3315, section 18.1.5. with the excepion that the first message is not delayed by a random amount. Instead systemd-networkd is supposed to take care of desynchronizing between other clients. Initialize the DHCPv6 client structure in sd_dhcp6_client_start() as this allows toggling between information request and normal DHCPv6 address aquisition modes.
2014-12-10sd-dhcp6-lease: Return only -EINVAL when a NULL lease is suppliedPatrik Flykt
Suppyling a NULL lease is not a condition that needs to be asserted, returning -EINVAL is informative enough to the caller. This simplifies calling code and doesn't falsely indicate that something erroneous was attempted.
2014-12-10sd-dhcp6-client: Make end of successfull option parsing explicitPatrik Flykt
When all DHCPv6 options have been parsed, dhcp6_option_parse() returns -ENOMSG. Explicitely set the return value to indicate success so that later code does not need to take this special value into account.
2014-12-10test: fix some tests when running inside a containerJan Synacek
2014-12-10virt: when detecting containers and /run/systemd/container cannot be read, ↵Lennart Poettering
check /proc/1/environ This way, we should be in a slightly better situation if a container is booted up with only a shell as PID 1. In that case /run/systemd/container will not be populated, and a check for it hence be ineffective. Checking /proc/1/environ doesn't fully fix the problem though, as the file is only accessible with privileges. This means if PID 1 is not systemd, and if privileges have been dropped the container detection will continue to fail.
2014-12-09systemctl: fix invalid free when enabling sysv services failsZbigniew Jędrzejewski-Szmek
The error was introduced in v215-343-g60731f32f1 'systemctl: do not bother to mutate state on error', by causing strv_free to attempt to free a static string. Simplify the whole thing by always keeping the array in valid state.
2014-12-09ima-setup: simplifyZbigniew Jędrzejewski-Szmek
2014-12-09treewide: sanitize loop_writeZbigniew Jędrzejewski-Szmek
loop_write() didn't follow the usual systemd rules and returned status partially in errno and required extensive checks from callers. Some of the callers dealt with this properly, but many did not, treating partial writes as successful. Simplify things by conforming to usual rules.
2014-12-10kdbus: downgrade warning if we cannot patch kdbus attach mask to DEBUG if ↵Lennart Poettering
kdbus is not available
2014-12-10util: introduce our own gperf based capability listLennart Poettering
This way, we can ensure we have a more complete, up-to-date list of capabilities around, always.
2014-12-10mount: clarify that we really need to replace the utab inotify code with the ↵Lennart Poettering
native API for this in libmount, as soon as that's stable
2014-12-10core: unify how we iterate over inotify eventsLennart Poettering
Let's add some syntactic sugar for iterating through inotify events, and use it everywhere.
2014-12-10mount: use bools where appropriateLennart Poettering
2014-12-10nspawn: create the macvlan MAC addresses in an arch independent stable wayLennart Poettering
2014-12-09journal: optimize iteration: skip files that cannot improve current ↵Michal Schmidt
candidate entry Suppose that while iterating we have already looked into a journal file and got a candidate for the next entry. And we are considering to look into another journal file because it may contain an entry that is nearer to the current location than the candidate. We should skip the whole journal file if we can tell by looking at its header that none of its entries can precede the candidate. Before: $ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null real 0m20.518s user 0m19.989s sys 0m0.328s After: $ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null real 0m9.445s user 0m9.228s sys 0m0.213s
2014-12-09journal: optimize iteration: skip whole files behind current locationMichal Schmidt
Interleaving of entries from many journal files is expensive. But there is room for optimization. We can skip looking into journal files whose entries all lie before the current iterating location. We can tell if that's the case from looking at the journal file header. This saves a huge amount of work if one has many of mostly not interleaved journal files. On my workstation with 90 journal files in /var/log/journal/ID/ totalling 3.4 GB I get these results: Before: $ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null real 5m54.258s user 2m4.263s sys 3m48.965s After: $ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null real 0m20.518s user 0m19.989s sys 0m0.328s The high "sys" time in the original was caused by putting more stress on the mmap-cache than it could handle. With the patch the working set now consists of fewer mmap windows and mmap-cache is not thrashing.
2014-12-09networkd: remove unused variableThomas Hindoe Paaboel Andersen
It is no longer used after 45af44d47da6933b260c734ad9ff721f63f80a4d
2014-12-09unit: update unit dropin paths and time when dropin file is written.WaLyong Cho
If a unit is set property by "systemctl set-property", a new dropin file is generated. But the unit's dropin_paths and dropin_mtime are not updated. So the unit is shown as need daemon reload. Update unit dropin_paths and dropin_mtime also when dropin file is written.
2014-12-09bus-proxy: cloning smack labelPrzemyslaw Kedzierski
When dbus client connects to systemd-bus-proxyd through Unix domain socket proxy takes client's smack label and sets for itself. It is done before and independent of dropping privileges. The reason of such soluton is fact that tests of access rights performed by lsm may take place inside kernel, not only in userspace of recipient of message. The bus-proxyd needs CAP_MAC_ADMIN to manipulate its label. In case of systemd running in system mode, CAP_MAC_ADMIN should be added to CapabilityBoundingSet in service file of bus-proxyd. In case of systemd running in user mode ('systemd --user') it can be achieved by addition Capabilities=cap_mac_admin=i and SecureBits=keep-caps to user@.service file and setting cap_mac_admin+ei on bus-proxyd binary.
2014-12-09run: introduce timer support optionWaLyong Cho
Support timer options --on-active=, --on-boot=, --on-startup=, --on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=, OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer respectively. And OnCalendar= and WakeSystem= supported by --timer-property= option like --property= of systemd-run. And if --unit= option and timer options are specified the command can be omitted. In this case, systemd-run assumes the target service is already loaded. And just try to generate transient timer unit only.
2014-12-09sd-bus: get rid of PID starttime conceptLennart Poettering
As kdbus no longer exports this, remove all traces from sd-bus too
2014-12-09sd-bus: properly support passing memfds around with offset/size parametersLennart Poettering
2014-12-09bus: sync with kdbus-git (ABI break)David Herrmann
kdbus-git gained two new features: * memfd offsets: This allows to specify a 'start' offset in kdbus_memfd so you can send partial memfd hunks instead of always the full memfd * KDBUS_HELLO_UNPRIVILEGED: If passed during HELLO, the client will be treated as unprivileged.
2014-12-09libsystemd-network: fix writing of routes in dhcp lease fileDan Winship
inet_ntoa() uses a static buffer, so you can't call it twice in the same fprintf() call.
2014-12-09sleep: drop redundant MESSAGE= prefixLennart Poettering
2014-12-09journalctl: respect --after-cursor semantics with --follow in all casesWesley Dawson
In the case where no entries have been added to the journal after the specified cursor, set need_seek before the main loop to prevent display of the entry at said cursor.
2014-12-09core: rename unit_destroy_cgroup() to unit_destroy_cgroup_if_empty() since ↵Lennart Poettering
it's not quite as destructive as it sounds nowadays
2014-12-09cgroup: Handle error when destroying cgroupRoss Lagerwall
If a cgroup fails to be destroyed (most likely because there are still processes running as part of a service after the main pid exits), don't free and remove the cgroup unit from the manager. This fixes a regression introduced by the cgroup rework in v205 where systemd would forget about processes still running after the unit becomes inactive. (This can happen when the main pid exits and KillMode=process or none).
2014-12-09fstab-generator: Allow mount.usr without mount.usrflags, honor rw/roMichael Marineau
There is no need to require mount.usrflags. The original implementation assumed that a btrfs subvolume would always be needed but that is not applicable to systems that do not use btrfs for /usr. Similar to using rootflags= for the default of mount.usrflags=, append the classic 'ro' and 'rw' flags to the mount options.
2014-12-09fstab-generator: free all allocated stringsLennart Poettering
2014-12-09nspawn: make sure macvlan MAC addresses are stableLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=85527
2014-12-09sd-rtnl: fix size check in sd_rtnl_message_append_string()Lennart Poettering
2014-12-09sd-bus: catch up with current kdbus, don't do matches on kdbus monitor ↵Lennart Poettering
connections
2014-12-08bus-proxy: fix compat with autostarted servicesLennart Poettering
2014-12-08load-fragment: remove wrong ifdef guardZbigniew Jędrzejewski-Szmek
config_parse_warn_compat is now always used for removed options. https://bugs.freedesktop.org/show_bug.cgi?id=87125
2014-12-08networkd: manager - enumerate addresses globally, rather than per-linkTom Gundersen
The kernel always returns all addresses, rather than only for the given link, so let's only enumerate once.
2014-12-08journal: Fix navigating backwards missing entriesOlivier Brunel
With DIRECTION_UP (i.e. navigating backwards) in generic_array_bisect() when the needle was found as the last item in the array, it wasn't actually processed as match, resulting in entries being missed. https://bugs.freedesktop.org/show_bug.cgi?id=86855
2014-12-08networkd: link - typoTom Gundersen
2014-12-08sd-rtnl: fix bogus warning about dropping 20 bytes from multi-part messagesTom Gundersen
Nothing was being dropped, we just failed to account for the NLMSG_DONE.
2014-12-08networkd: route - ignore unknown address familyTom Gundersen
2014-12-08udev: link-config - simplify net-matchTom Gundersen