summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-07-11util: fix has cc check and add testZbigniew Jędrzejewski-Szmek
2014-07-11Add DEPLOYMENT to hostnamectlJóhann B. Guðmundsson
[zj: remove the check against a fixed list of environments.]
2014-07-10sysusers: allow overrides in /etc and /runZbigniew Jędrzejewski-Szmek
An administrator might want to block a certain sysusers config file from being executed, e.g. to block the creation of a certain user. Only a relatively short description is added in the man page, since overrides should be relatively rare.
2014-07-11nss-mymachines: add new NSS module for automatically resolving addresses of ↵Lennart Poettering
all local containers
2014-07-11build-sys: export sd_path APIsLennart Poettering
2014-07-10nss-myhostname: move NSS boilerplate to nss-util.hLennart Poettering
2014-07-10machinectl: show network interface name for containersLennart Poettering
Also, append the if indexes as scope field to the addresses we show. That way they may be used for connecting to the containers directly.
2014-07-10nspawn: register external network interface with machinedLennart Poettering
2014-07-10machined: allow registering host-side network interfaces for communication ↵Lennart Poettering
with containers
2014-07-10networkd: always prefer dhcp routes over ipv4ll routesLennart Poettering
2014-07-10machined: when querying addresses of a container, use same code as ↵Lennart Poettering
nss-myhostname uses
2014-07-10libsystemd: make use of our common sockaddr_union everywhereLennart Poettering
2014-07-10shared: split out in_addr related calls from socket-util.[ch] into its ↵Lennart Poettering
private in-addr-util.[ch] These are enough calls for a new file, and they are sufficiently different from the sockaddr-related calls, hence let's split this out.
2014-07-10nss-myhostname: move local address listing logic into shared, so that we can ↵Lennart Poettering
make use of it from machined
2014-07-10nss-myhostname: only export the NSS entry point symbols, nothing elseLennart Poettering
2014-07-10machined: various modernizations when enumerating container addressesLennart Poettering
2014-07-10nss-myhostname: following the usual naming scheme for .c/.h filesLennart Poettering
2014-07-10nss-myhostname: various modernizationsLennart Poettering
2014-07-10resolved: properly free network monitorLennart Poettering
2014-07-10event: pull in sd-event.h from event-util.hLennart Poettering
2014-07-09sysusers: don't allow control characters in gecos fieldsLennart Poettering
2014-07-09sysusers: don't allow user names longer than UT_NAMESIZELennart Poettering
As pointed out by Miloslav Trmač it might be a good idea to make sure that usernames stay with in the utmp-defined limits.
2014-07-09timedated: manage systemd-timesyncd directly instead of lists of alternativesKay Sievers
Alternative NTP implementations should add a: Conflicts=systemd-timesyncd.service to take over the built-in NTP functionality of systemd.
2014-07-09hostnamed: add a new chassis type for watchesLennart Poettering
2014-07-08journal/compress: improve xz compression performanceJon Severinsson
The new lzma2 compression options at the top of compress_blob_xz are equivalent to using preset "0", exept for using a 1 MiB dictionary (the same as preset "1"). This makes the memory usage at most 7.5 MiB in the compressor, and 1 MiB in the decompressor, instead of the previous 92 MiB in the compressor and 8 MiB in the decompressor. According to test-compress-benchmark this commit makes XZ compression 20 times faster, with no increase in compressed data size. Using more realistic test data (an ELF binary rather than repeating ASCII letters 'a' through 'z' in order) it only provides a factor 10 speedup, and at a cost if a 10% increase in compressed data size. But that is still a worthwhile trade-off. According to test-compress-benchmark XZ compression is still 25 times slower than LZ4, but the compressed data is one eighth the size. Using more realistic test data XZ compression is only 18 times slower than LZ4, and the compressed data is only one quarter the size. $ ./test-compress-benchmark XZ: compressed & decompressed 2535300963 bytes in 42.30s (57.15MiB/s), mean compresion 99.95%, skipped 3570 bytes LZ4: compressed & decompressed 2535303543 bytes in 1.60s (1510.60MiB/s), mean compresion 99.60%, skipped 990 bytes
2014-07-08fix #ifdefRonny Chevalier
2014-07-08accelerometer: Don't wait for new data from the sensorBastien Nocera
Instead of waiting for new data from the sensor, which might be a long time coming, depending on the sensor device, ask the kernel for the last state for that particular input device.
2014-07-08load-fragment: ConditionFirstBoot wants a bool string, not a pathMichal Schmidt
2014-07-08systemctl: fix visual alignment for lines prefixed with color dotsMichal Schmidt
2014-07-08logind: allow switching to unused VTs via SwitchTo()David Herrmann
If compositors use the new SwitchTo() logic to map F1-F12, we should allow them to switch to unregistered VTs, too. Otherwise, the auto-spawn logic of gettys won't trigger. Reported-by: Jasper St. Pierre <jstpierre@mecheye.net> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-07-07Fix typoZbigniew Jędrzejewski-Szmek
2014-07-07fstab-generator: fix trivial leakZbigniew Jędrzejewski-Szmek
2014-07-07journal/compress: fix calls to decompress_blobZbigniew Jędrzejewski-Szmek
2014-07-07resolved: make use of union in_addr_union in resolved, tooLennart Poettering
2014-07-07networkd: simplify signal handling of SIGTERM/SIGINTLennart Poettering
sd-event makes handling SIGTERM/SIGINT a lot easier than it used to, let's make use of this
2014-07-07resolved: make sure SIGTER/SIGINT actually can be caught and processedLennart Poettering
2014-07-07resolved: let config_parse() open the configuration file for usLennart Poettering
2014-07-07shared: fix format string for usec_t typeLennart Poettering
2014-07-07escape: beef up new systemd-escape toolLennart Poettering
Add various options for making it easy unescape, or mangle, or format as template instance or append a suffix.
2014-07-07add new systemd-escape toolMichael Biebl
2014-07-07dropin: add format attribute and fix a wrong callerThomas Hindoe Paaboel Andersen
2014-07-07fstab-generator: add comma when removed option is in the middleZbigniew Jędrzejewski-Szmek
xxx,x-systemd.default-timeout=y,zzz was filtered to xxxzzz, but should be xxx,zzz, of course.
2014-07-07networkd: add support for modeSusant Sahani
This patch adds supports networkd to configure bond mode during creation via persistent conf. Mode can be configured with conf param 'Mode'. A new section Bond is added to the conf to support bond mode. These modes can be configured now. balance-rr active-backup balance-xor broadcast 802.3ad balance-tlb balance-alb Example conf file: test-bond.conf [NetDev] Name=bond1 Kind=bond [Bond] Mode=balance-xor Test case: 1. start networkd service: 12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff 2. find bond mode: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (xor) Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Changes: 1. Added file networkd-bond.c 2. Bond mode enum BondMode 3. conf section [Bond] [tomegun: whitespace]
2014-07-07networkd veth: Make kind assertSusant Sahani
It's more appropriate to make it's assert than -ENOTSUP
2014-07-07firstboot: get rid of firstboot generator again, introduce ↵Lennart Poettering
ConditionFirstBoot= instead As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer way to hook in systemd-firstboot.service on first boots (those with /etc unpopulated), so let's do this, and get rid of the generator again.
2014-07-07firstboot: follow lock protocol when changing /etc/shadowLennart Poettering
2014-07-07base-filesystem.c: terminate string array elements with \0Harald Hoyer
NULSTR_FOREACH() looks for a terminating zero and the element also needs one.
2014-07-07service: flush status text and errno values each time a service is startedLennart Poettering
We shouldn't show status texts from previous service starts
2014-07-07systemctl: show StatusErrno value in "systemctl status"Lennart Poettering
2014-07-07service: don't accept negative ERRNO= notification messagesLennart Poettering