| Age | Commit message (Collapse) | Author |
|---|
|
This allows to show only units with specified LOAD or SUB or ACTIVE state.
|
|
Example:
2013-07-18T10:10:01+0200 sandworm CROND[20957]: (root) CMD (/usr/lib64/sa/sa1 1 1)
|
|
|
|
sphinx, oh sphinx, why do you require manual ficksups all the time?
|
|
$ systemctl --user status hoohoo
hoohoo.service
Loaded: loaded (/home/zbyszek/.config/systemd/user/hoohoo.service; static)
Active: inactive (dead)
start condition failed at Tue 2013-06-25 18:08:42 EDT; 1s ago
ConditionPathExists=/tmp/hoo was not met
Full information is exported over D-Bus:
[(condition, trigger, negate, param, state),...]
where state is one of "failed" (<0), "untested" (0), "OK" (>0).
I've decided to use 0 for "untested", because it might be useful to
differentiate different types of failure later on, without breaking
compatibility.
systemctl shows the failing condition, if there was a non-trigger
failing condition, or says "none of the trigger conditions were met",
because there're often many trigger conditions, and they must all
fail for the condition to fail, so printing them all would consume
a lot of space, and bring unnecessary attention to something that is
quite low-level.
|
|
ConditionPathExists=/tmp/nosuchpath failed for nosuchpath.service.
|
|
Instead of :-0, :1, :5, etc., use -0, 1 or +1, 5, etc. For BOOT_ID+OFFSET,
use BOOT_ID+offset or BOOT_ID-offset (either + or - is required).
Also make error handling a bit more robust and verbose.
Modify the man page to describe the most common case (-b) first,
and the second most common case (-b -1) second.
|
|
Also export missing flags.
|
|
Back in 6a58bf4135 raising stop iteration was removed from the C
code, but wasn't added in the Python counterpart.
|
|
"not-found" is a recently added load state and was previously just a
special case of "error". Since it also indicates a load error we should
also highlight it red, the same way as "error" was treated before.
|
|
|
|
process is defined
It won't help if the main process is still there and there is no new
process to kill.
|
|
If you want timing information from the initramfs, use systemd in the
initramfs.
|
|
dracut uses systemd in the initramfs and does not write these files
anymore.
The state of the root fsck is serialized.
|
|
|
|
Two options are added: --show-cursor to print the cursor at the end,
and --after-cursor to resume logs on the next line after the previous one.
|
|
If we pass a variable to open()'s flags parameter it really wants a mode
parameter too, otherwise some gcc version whine. Hence, pass 0 in that
case.
|
|
|
|
|
|
Simplify by using FOREACH_DIRENT and _cleanup_closedir_ macros.
|
|
Based on a patch by Kay Sievers.
When a dead device nodes is tagged with "uaccess" using the static_node mechanism,
it's ACL's are managed by logind in the same way as "live" device nodes.
This allows in particular /dev/snd/{seq,timer} to cause modules to be loaded
on-demand when accessed by a non-privileged user.
|
|
Based on a patch by Kay Sievers.
A tag is exported at boot as a symlinks to the device node in the folder
/run/udev/static_node-tags/<tagname>/, if the device node exists.
These tags are cleaned up by udevadm info --cleanup-db, but are otherwise
never removed.
|
|
If you have a ASCII only terminal, there is no way to set the charmap to
ANSI_X3.4-1968, other than using LC_CTYPE=C.
We don't want to assume a UTF-8 capable terminal in this case and only
do so, if LANG, LC_ALL and LC_CTYPE are unset.
|
|
|
|
A few asserts are replaced with 'return -EINVAL'. I think that
assert should not be used to check argument in public functions.
Fields in struct sd_journal are rearranged to make it less
swiss-cheesy.
|
|
Jan: test-tables fails on my system. The one it's failing on is:
syscall: 222 → (null) → -1
... and indeed, our own tables should not have holes, but syscall
tables certainly might.
|
|
LANG does not have to be set and setting it to default to the default
does not add any value.
|
|
Hi,
I redid the boot ID look up to use enumerate_unique.
This is quite fast if the cache is warm but painfully slow if
it isn't. It has a slight chance of returning the wrong order if
realtime clock jumps around.
This one has to do n searches for every boot ID there is plus
a sort, so it depends heavily on cache hotness. This is in contrast
to the other way of look-up through filtering by a MESSAGE_ID,
which only needs about 1 seek + whatever amount of relative IDs
you want to walk.
I also have a linked-list + (in-place) mergesort version of this
patch, which has pretty much the same runtime. But since this one
is using libc sorting and armortized allocation, I prefer this
one.
To summarize: The MESSAGE_ID way is a *lot* faster but can be
incomplete due to rotation, while the enumerate+sort will find
every boot ID out there but will be painfully slow for large
journals and cold caches.
You choose :P
Jan
|
|
|
|
In a User-Mode Linux session:
$ systemd-detect-virt
none
Although it is possible to reliably detect virtualization:
$ cat /proc/cpuinfo
processor : 0
vendor_id : User Mode Linux
model name : UML
mode : skas
host : Linux kytes 3.11.0-rc1-00009-ge5fd680 (...)
bogomips : 7007.43
So, grep for the string "\nvendor_id\t: User Mode Linux\n" in
/proc/cpuinfo, and say "uml" when asked.
|
|
Revert commit 90fc91d0065 again. There is no 900XC3 model, that's 900X3C and
already covered by the 900X3* match.
See https://launchpad.net/bugs/1012365
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=55248
|
|
I think this is the most important of the capabilities bitmasks to log.
|
|
|
|
Make Type=idle communication bidirectional: when bootup is finished,
the manager, as before, signals idling Type=idle jobs to continue.
However, if the boot takes too long, idling jobs signal the manager
that they have had enough, wait a tiny bit more, and continue, taking
ownership of the console. The manager, when signalled that Type=idle
jobs are done, makes a note and will not write to the console anymore.
This is a cosmetic issue, but quite noticable, so let's just fix it.
Based on Harald Hoyer's patch.
https://bugs.freedesktop.org/show_bug.cgi?id=54247
http://unix.stackexchange.com/questions/51805/systemd-messages-after-starting-login/
|
|
Tcrypt uses a different approach to passphrases/key files. The
passphrase and all key files are incorporated into the "password"
to open the volume. So, the idea of slots that provide a way to
open the volume with different passphrases/key files that are
independent from each other like with LUKS does not apply.
Therefore, we use the key file from /etc/crypttab as the source
for the passphrase. The actual key files that are combined with
the passphrase into a password are provided as a new option in
/etc/crypttab and can be given multiple times if more than one
key file is used by a volume.
|
|
|
|
Also use _cleanup_free_ where possible.
|
|
ncp is also used for Netware mount point, recognize it as such. Fixes
https://bugzilla.novell.com/show_bug.cgi?id=828905.
|
|
|
|
|
|
Assertion 'p' failed at src/shared/path-util.c:51, function path_get_file_name(). Aborting.
The unit file could not be found, and i->path would not be set.
In 02b9e969 a code path was added which attempts to remove symlinks
to a nonexistent (removed) unit file. This worked OK in case of
non-instance services, but broke in the case of instance services.
Behaviour wrt. to instance units is changed in the way that 02b9e969
changed it for non-instance units: it is now possible to remove
instance symlinks to a template unit that has been removed.
This patch isn't a full fix, because the behaviour wrt. to enabling
and disabling instance units is still broken: e.g it is possible to
start autovt@tty5.service, but it is not possible to enable it,
because autovt@.service is a symlink, and on the other hand, disabling
getty@tty5.service removes all symlinks to getty@.service, which is
wrong too. But segfaults make bad pr, so let's add at least this
partial fix for now.
|
|
|
|
Enable coverage with --enable-coverage.
"make coverage" will create the report locally,
"make coverage-sync" will upload the report to
http://www.freedesktop.org/software/systemd/coverage/.
Requires lcov version 1.10 to handle naming in systemd and to
use the --no-external option.
[zj: make the coverage at least generate something with
separate build dir, simplify rules a bit: all errors
are mine. ]
|
|
Before, "systemctl reenable getty@tty1.service" would fail with:
Failed to issue method call: File exists
To fix this, reimplement "reenable" explicitly as a disable followed by
an enable.
This is shorter and is how the man page documents its behavior.
|
|
non-persistant logging
Generating seed...
Generating key pair...
Generating sealing key...
Failed to open /var/log/journal/33f46101703a10c5fc6fa4f451840101/fss.tmp.k2wDDU: No such file or directory
|
|
We lost the reference when setting path second time.
|
|
|
|
|
|
|
