| Age | Commit message (Collapse) | Author |
|---|
|
Let's make use of the new internal API. This mostly doesn't change anything for
the caller, however, "systemd-nspawn --image=/dev/sda7" works now as the new
code can handle disk images with no partition tables, and make any detected
images directly the root.
|
|
This adds two new APIs to systemd:
- loop-util.h is a simple internal API for allocating, setting up and releasing
loopback block devices.
- dissect-image.h is an internal API for taking apart disk images and figuring
out what the purpose of each partition is.
Both APIs are basically refactored versions of similar code in nspawn. This
rework should permit us to reuse this in other places than just nspawn in the
future. Specifically: to implement RootImage= in the service image, similar to
RootDirectory=, but operating on a disk image; to unify the gpt-auto-discovery
generator code with the discovery logic in nspawn; to add new API to machined
for determining the OS version of a disk image (i.e. not just running
containers). This PR does not make any such changes however, it just provides
the new reworked API.
The reworked code is also slightly more powerful than the nspawn original one.
When pointing it to an image or block device with a naked file system (i.e. no
partition table) it will simply make it the root device.
|
|
All other constructors in libudev do that, let's also do this for udev_new().
|
|
|
|
"*:*" should be equivalent to "*-*-* *:*:00" (minutely)
rather than running every microsecond.
Fixes #4804
|
|
Fixes: #4839
|
|
1. Listed in TODO.
2. Tree wide replace safe_atou16 with parse_ip_port incase
it's used for ports.
|
|
Let's accept "µs" as alternative time unit for microseconds. We already accept
"us" and "usec" for them, lets extend on this and accept the proper scientific
unit specification too.
We will never output this as time unit, but it's fine to accept it, after all
we are pretty permissive with time units already.
|
|
|
|
One SA_RESTART is enough. Fall out from
e28c7cd0665364bb910fe2cead882623c23c28ac
|
|
Fixes #4789
|
|
When we are in link_enter_configured we assume that the
link->state should be LINK_STATE_SETTING_ROUTES but in some
situation it's LINK_STATlE_SETTING_ADDRESSES.
Just ignore the wrong state.
Also since the return value not used any where
make link_enter_configured return type void.
Fixes: #4746
|
|
Make sure to populate the cache in cache_space_refresh() at least once
otherwise it's possible that the system boots fast enough (and the journal
flush service is finished) before the invalidate cache timeout (30 us) has
expired.
Fixes: #4790
|
|
Follow-up to #4687 and e7330dfe14b1965f.
|
|
|
|
networkd: support marking links unmanaged
|
|
|
|
It is possible to specify only one quote in udev rules, which is not
detected as an invalid quoting (" instead of "" for empty string).
Technically this doesn't lead to a bug, because the string ends in two
terminating nul characters at this position, but a user should still be
reminded that his configuration is invalid.
|
|
|
|
|
|
As suggested by @keszybz
|
|
When complaining about the inability to resolve a path, show the full path, not
just the relative one.
As suggested by @keszybz.
|
|
/var/tmp
This extends the --bind= and --overlay= syntax so that an empty string as source/upper
directory is taken as request to automatically allocate a temporary directory
below /var/tmp, whose lifetime is bound to the nspawn runtime. In combination
with the "+" path extension this permits a switch "--overlay=+/var::/var" in
order to use the container's shipped /var, combine it with a writable temporary
directory and mount it to the runtime /var of the container.
|
|
If a source path is prefixed with "+" it is taken relative to the container's
root directory instead of the host. This permits easily establishing bind and
overlay mounts based on data from the container rather than the host.
This also reworks custom_mounts_prepare(), and turns it into two functions: one
custom_mount_check_all() that remains in nspawn.c but purely verifies the
validity of the custom mounts configured. And one called
custom_mount_prepare_all() that actually does the preparation step, sorts the
custom mounts, resolves relative paths, and allocates temporary directories as
necessary.
|
|
We already set it in most cases, but make sure to set it in all others too, and
document that that's a good idea.
|
|
Fixes: #4634
|
|
Add overlay_mount_parse() similar in style to tmpfs_mount_parse() and
bind_mount_parse().
|
|
The function is of the "library" kind and doesn't log ENOMEM in all other
cases, hence fix the one outlier.
|
|
If --template= is used on an image, then the image might not exist initially.
We can use CHASE_NON_EXISTING to properly lock the image already before it
exists. Let's do so.
|
|
This restores the ability to implicitly create files/directories to mount
specified mount points on.
|
|
This new flag controls whether to consider a problem if the referenced path
doesn't actually exist. If specified it's OK if the final file doesn't exist.
Note that this permits one or more final components of the path not to exist,
but these must not contain "../" for safety reasons (or, to be extra safe,
neither "./" and a couple of others, i.e. what path_is_safe() permits).
This new flag is useful when resolving paths before issuing an mkdir() or
open(O_CREAT) on a path, as it permits that the file or directory is created
later.
The return code of chase_symlinks() is changed to return 1 if the file exists,
and 0 if it doesn't. The latter is only returned in case CHASE_NON_EXISTING is
set.
|
|
Let's remove chase_symlinks_prefix() and instead introduce a flags parameter to
chase_symlinks(), with a flag CHASE_PREFIX_ROOT that exposes the behaviour of
chase_symlinks_prefix().
|
|
Previously, we'd generate an EINVAL error if it is attempted to escape a root
directory with relative ".." symlinks. With this commit this is changed so that
".." from the root directory is a NOP, following the kernel's own behaviour
where /.. is equivalent to /.
As suggested by @keszybz.
|
|
root
|
|
and so on
Fixes: #2860
|
|
chase_symlinks() currently expects a fully qualified, absolute path, relative
to the host's root as first argument. Which is useful in many ways, and similar
to the paths unlink(), rename(), open(), … expect. Sometimes it's however
useful to first prefix the specified path with the specified root directory.
Add a new call chase_symlinks_prefix() for this, that is a simple wrapper.
|
|
|
|
|
|
--directory=
As suggested in PR #3667.
This PR simply ensures that --template= can be used as alternative to
--directory= when --ephemeral is used, following the logic that for ephemeral
options the source directory is actually a template.
This does not deprecate usage of --directory= with --ephemeral, as I am not
convinced the old logic wouldn't make sense.
Fixes: #3667
|
|
This resolves any paths specified on --directory=, --template=, and --image=
before using them. This makes sure nspawn can be used correctly on symlinked
images and directory trees.
Fixes: #2001
|
|
Let's use chase_symlinks() everywhere, and stop using GNU
canonicalize_file_name() everywhere. For most cases this should not change
behaviour, however increase exposure of our function to get better tested. Most
importantly in a few cases (most notably nspawn) it can take the correct root
directory into account when chasing symlinks.
|
|
We generally try to make our destructors robust regarding NULL pointers, much
in the same way as glibc's free(). Do this also for unit_free().
Follow-up for #4748.
|
|
(#4773)
|
|
So let's set ForwardDelaySec to USEC_INFINITY .
Reference:
https://wiki.linuxfoundation.org/networking/bridge#does-dhcp-work-overthrough-a-bridge
|
|
Improvements for notify services (including #4212)
|
|
Setting NotifyAccess=exec allows notifications coming directly from any
control process.
|
|
|
|
So far systemd-nspawn container has been creating files under
/run/systemd/inaccessible, no matter whether it's running in user
namespace or not. That's fine for regular files, dirs, socks, fifos.
However, it's not for block and character devices, because kernel
doesn't allow them to be created under user namespace. It results
in warnings at booting like that:
====
Couldn't stat device /run/systemd/inaccessible/chr
Couldn't stat device /run/systemd/inaccessible/blk
====
Thus we need to have the cgroups whitelisting handler to silently ignore
a file, when the device path is prefixed with "-". That's exactly the
same convention used in directives like ReadOnlyPaths=. Also insert the
prefix "-" to inaccessible entries.
|
|
IMA validates file signatures based on the security.ima xattr. As of
Linux-4.7, instead of copying the IMA policy into the securityfs policy,
the IMA policy pathname can be written, allowing the IMA policy file
signature to be validated.
This patch modifies the existing code to first attempt to write the
pathname, but on failure falls back to copying the IMA policy contents.
|
|
We assume a process can be only one of the two in service_sigchld_event.
|
