| Age | Commit message (Collapse) | Author |
|---|
|
sd_bus_error_set_errnof supports %m, so there's no need to call
strerror manually.
|
|
|
|
It's prone to error and annoying to have to add it manually. It was
missing from a few places.
|
|
errno value is not protected (it is undefined after this function returns).
Various mhd_* functions are not documented to protect errno, so this could not
guaranteed anyway.
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1374371
When root was empty or equal to "/", chroot_symlinks_same was called with
root==NULL, and strjoina returned "", so the code thought both paths are equal
even if they were not. Fix that by always providing a non-null first argument
to strjoina.
|
|
A follow-up for #3818 (992e8f2).
|
|
Drop more kdbus functionality
|
|
Previous fix didn't consider handling multiple ExecStop commands.
|
|
One trailing dot is valid, but more than one isn't. This also fixes glibc's
posix/tst-getaddrinfo5 test.
Fixes #3978.
|
|
If the unit is in the dbus queue when it is removed then the last change
signal is never sent. Fix this by checking the dbus queue and explicitly
send the change signal before sending the remove signal.
|
|
|
|
ENOTCONN may be a legitimate return code if the endpoint disappeared,
but the service should still attempt to shutdown cleanly.
|
|
Fail hard if SECCOMP was detected but could not be installed
|
|
In https://github.com/systemd/systemd/pull/4004 , a runtime detection
method for seccomp was added. However, it does not detect the case
where CONFIG_SECCOMP=y but CONFIG_SECCOMP_FILTER=n. This is possible
if the architecture does not support filtering yet.
Add a check for that case too.
While at it, change get_proc_field usage to use PR_GET_SECCOMP prctl,
as that should save a few system calls and (unnecessary) allocations.
Previously, reading of /proc/self/stat was done as recommended by
prctl(2) as safer. However, given that we need to do the prctl call
anyway, lets skip opening, reading and parsing the file.
Code for checking inspired by
https://outflux.net/teach-seccomp/autodetect.html
|
|
fix #4080
|
|
ethtool_sset_info adding some extra space to it.
also fix valgrind warning
```
Unloaded link configuration context.
==31690==
==31690== HEAP SUMMARY:
==31690== in use at exit: 8,192 bytes in 2 blocks
==31690== total heap usage: 431 allocs, 429 frees, 321,164 bytes allocated
==31690==
==31690== 4,096 bytes in 1 blocks are still reachable in loss record 1 of 2
==31690== at 0x4C2BBAD: malloc (vg_replace_malloc.c:299)
==31690== by 0x166B32: mempool_alloc_tile (mempool.c:62)
==31690== by 0x166BBC: mempool_alloc0_tile (mempool.c:81)
==31690== by 0x15B8FC: hashmap_base_new (hashmap.c:732)
==31690== by 0x15B9F7: internal_hashmap_new (hashmap.c:766)
==31690== by 0x151291: conf_files_list_strv_internal (conf-files.c:103)
==31690== by 0x1514BA: conf_files_list_strv (conf-files.c:135)
==31690== by 0x13A1CF: link_config_load (link-config.c:227)
==31690== by 0x135B68: builtin_net_setup_link_init
(udev-builtin-net_setup_link.c:77)
==31690== by 0x1306B3: udev_builtin_init (udev-builtin.c:57)
==31690== by 0x11E984: adm_builtin (udevadm-test-builtin.c:72)
==31690== by 0x117B4D: run_command (udevadm.c:75)
```
Fixes #4080
|
|
Prior to this commit, users could be given an unusable command to run if
they attempted to stop or start special services. For example:
$ systemctl stop -- -.mount
Failed to stop -.mount: Operation refused, unit -.mount may be \
requested by dependency only.
See system logs and 'systemctl status -.mount' for details.
$ systemctl status -.mount
systemctl: invalid option -- '.'
This adds a '--' to the example command in these situations.
|
|
(also: add comments about the used numbers)
Fixes: #3930
|
|
Fixes: #4049
|
|
Let's bump it further, as this the current limit turns out to be problematic
IRL. Let's bump it to more than twice what we know of is needed.
Fixes: #4068
|
|
This splits the OS field in two : one for the distribution name
and one for the the version id.
Dashes are written for missing fields.
This also prints ip addresses of known machines. The `--max-addresses`
option specifies how much ip addresses we want to see. The default is 1.
When more than one address is written for a machine, a `,` follows it.
If there are more ips than `--max-addresses`, `...` follows the last
address.
|
|
This patch allows to configure AgeingTimeSec, Priority and DefaultPVID for
bridge interfaces.
|
|
|
|
Flushing foreign configuration for unmanaged interfaces is outright
evil, especially when it's a regular occurence with Wi-Fi.
Fixes: 3104883ddc24 "networkd: remove route if carrier is lost"
Ref: #3831
|
|
Similar to MemoryMax=, MemorySwapMax= limits swap usage. This controls
controls "memory.swap.max" attribute in unified cgroup.
|
|
The patch supports to configure
GenericReceiveOffload
LargeReceiveOffload
|
|
Resolves #3534
|
|
The patch supports to configure
GenericReceiveOffload
LargeReceiveOffload
|
|
This patch supports these features to be on or off
Generic Segmentation Offload
TCP Segmentation Offload
UDP Segmentation Offload
fixes #432
|
|
'continue' is a fancy no-op here – it only skips through the inner loop,
not the outer one, so entries already in BootOrder get printed twice.
This partially reverts f939cff71577 "bootctl: various coding style
updates".
|
|
add ForceUnmount= setting for mount units
|
|
|
|
Similar to MemoryMax=, MemorySwapMax= limits swap usage. This controls
controls "memory.swap.max" attribute in unified cgroup.
|
|
fileio makes use of O_TMPFILE when it is available.
We now always have O_TMPFILE, defined in missing.h if missing
from the toolchain headers.
Have fileio include missing.h and drop the guards around the
use of O_TMPFILE.
|
|
Currently, a missing __O_TMPFILE was only defined for i386 and x86_64,
leaving any other architectures with an "old" toolchain fail miserably
at build time:
src/import/export-raw.c: In function 'reflink_snapshot':
src/import/export-raw.c:271:26: error: 'O_TMPFILE' undeclared (first use in this function)
new_fd = open(d, O_TMPFILE|O_CLOEXEC|O_NOCTTY|O_RDWR, 0600);
^
__O_TMPFILE (and O_TMPFILE) are available since glibc 2.19. However, a
lot of existing toolchains are still using glibc-2.18, and some even
before that, and it is not really possible to update those toolchains.
Instead of defining it only for i386 and x86_64, define __O_TMPFILE
with the specific values for those archs where it is different from the
generic value. Use the values as found in the Linux kernel (v4.8-rc3,
current as of time of commit).
---
Note: tested on ARM (build+run), with glibc-2.18 and linux headers 3.12.
Untested on other archs, though (I have no board to test this).
Changes v1 -> v2:
- add a comment specifying some are hexa, others are octal.
|
|
O_TMPFILE may be missing from the system headers, so use our fallback
definition.
---
Changes v1 -> v2:
- move include with local includes
|
|
|
|
"-f" switch
|
|
Resolves #3534
|
|
"-l" switch (#3827)
|
|
Minor cleanup suggested by Lennart.
|
|
permit bus clients to pin units to avoid automatic GC
|
|
This commit follows further on the deprecation path for --share-system,
by splitting and gating each share-able namespace behind its own
environment flag.
|
|
When the system journal becomes re-opened post-flush with the runtime
journal open, it implies we've recovered from something like an ENOSPC
situation where the system journal rotate had failed, leaving the system
journal closed, causing the runtime journal to be opened post-flush.
For the duration of the unavailable system journal, we log to the
runtime journal. But when the system journal gets opened (space made
available, for example), we need to close the runtime journal before new
journal writes will go to the system journal. Calling
server_flush_to_var() after opening the system journal with a runtime
journal present, post-flush, achieves this while preserving the runtime
journal's contents in the system journal.
The combination of the present flushed flag file and the runtime journal
being open is a state where we should be logging to the system journal,
so it's appropriate to resume doing so once we've successfully opened
the system journal.
|
|
Flushing foreign configuration for unmanaged interfaces is outright
evil, especially when it's a regular occurence with Wi-Fi.
Fixes: 3104883ddc24 "networkd: remove route if carrier is lost"
Ref: #3831
|
|
|
|
|
|
functions (#4019)
Prevents discard-qualifiers warnings when the passed variable was const
|
|
Fixes #3882
|
