summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2012-05-27journald: refer to the correct man pageMatthias Clasen
Fix the reference to the journald.conf man page in the config file of the same name.
2012-05-27scsi_id: fix truncated model in by-id device linksJean Delvare
Do not forget the leading "S" when appending the serial number, otherwise we chop the last character of the model name. Addresses: https://bugzilla.novell.com/show_bug.cgi?id=763397 Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Petr Uzel <petr.uzel@suse.cz>
2012-05-25udev: silent gcc warningsKay Sievers
2012-05-24swap: avoid bad memory accesssystemd/v183Lennart Poettering
2012-05-24build-sys: prepare release 183Lennart Poettering
2012-05-24main: add configuration option to alter capability bounding set for PID 1Lennart Poettering
This also ensures that caps dropped from the bounding set are also dropped from the inheritable set, to be extra-secure. Usually that should change very little though as the inheritable set is empty for all our uses anyway.
2012-05-24service: for Type=idle units consider START_PRE, START, START_POST all as ACTIVELennart Poettering
We want to avoid a deadlock when a service has ExecStartPre= programs that wait for the job queue to run empty because of Type=idle, but which themselves keep the queue non-empty because START_PRE was considered ACTIVATING and hence the job not complete. With this patch we alter the state translation table so that it is impossible ever to wait for Type=idle unit, hence removing the deadlock.
2012-05-23journal: don't complain if SELinux userspace is available but the kernel ↵Lennart Poettering
lacks it
2012-05-23man: properly document FsckPassNo= for mount unitsLennart Poettering
2012-05-23readahead: use Conflicts= instead of masking to get rid of readahead unitsLennart Poettering
2012-05-23readahead: disable collect/replay during system updatesLennart Poettering
2012-05-23readahead: avoid running of readahead services if readahead is already doneLennart Poettering
2012-05-23readahead: avoid activating the journal by accident, log directly to kmsgLennart Poettering
2012-05-23manager: rework generator logicLennart Poettering
Previously generated units were always placed at the end of the search path. With this change there will be three unit dirs instead of one, to place generated entries at the beginning, in the middle and at the end of the search path: beginning: for units that need to override all configuration, regardless of user or vendor. Example use: system-update-generator uses this to temporarily redirect default.target. middle: for units that need to override vendor configuration, but not vendor configuration. Example use: /etc/fstab should override vendor supplied configuration (think /tmp), but should not override native user configuration. end: does not override anything but is available as well. Possible usage might be to convert D-Bus bus service files to native units but allowing vendor supplied native units to win.
2012-05-22units: remove service sysv_path variable and replace it by generic unit_pathLennart Poettering
UnitPath= is also writable via native units and may be used by generators to clarify from which file a unit is generated. This patch also hooks up the cryptsetup and fstab generators to set UnitPath= accordingly.
2012-05-22log: make sure generators never log into the journal to avoid activation ↵Lennart Poettering
deadlocks This makes all generators log to kmsg by default.
2012-05-22mount: drop unused functionLennart Poettering
2012-05-22system-update: add system update generatorLennart Poettering
http://freedesktop.org/wiki/Software/systemd/SystemUpdates
2012-05-22journal: log journal internal messages to kmsgLennart Poettering
2012-05-22execute: use a much lower idle timeout that default timeLennart Poettering
The idle timeout after all is for cosmetics only, hence avoid any substantial delays just for it.
2012-05-22mount: replace PID1 internal fstab parser with generatorLennart Poettering
Bit by bit we should remove non-unit parsing from PID 1 and move into generators, to clean up our code base a bit and clearly separate parsers.
2012-05-22main: only fall back to /bin/sh in case /sbin/init does not existKay Sievers
2012-05-22logind: fix write out of user state fileLennart Poettering
2012-05-22switch-root: do not use close old_root_fd after rm_rf_children()Harald Hoyer
rm_rf_children() has already closed the fd with closedir().
2012-05-22util: make sure to fstatat() at most once in rm_rf_children()Lennart Poettering
2012-05-22journal: crash when filesystem is low on spaceSjoerd Simons
When space is getting too low on a file system rotating the journal file will fail after the rotation, as opening the new logfile will fail. Recognize this when logging the error and don't try to dereference a NULL JournalFile pointer.
2012-05-22main: properly queue default.target after switched rootLennart Poettering
This also introduces rd.systemd.unit= to specify the unit to boot into in the initrd.
2012-05-22keymap: support for Lenovo IdeaPad Z570 keyboardMaxim A. Mikityanskiy
2012-05-22mount: use the same fstab extension option syntax everywhereLennart Poettering
The man page and the actual code differed, and this is now corrected
2012-05-22service: fix auto-restart handling in service_start()David Ward
Do not bypass the SERVICE_DEAD/SERVICE_FAILED state by manually issuing a start job while an automatic restart is pending.
2012-05-22service: fix auto-restart handling in service_stop()David Ward
When service_stop() handles a service in the SERVICE_AUTO_RESTART state, it calls service_set_state() to transition it to the SERVICE_DEAD state. However if the service failed, it should transition it to SERVICE_FAILED instead, which will trigger its OnFailure units. To achieve this, we now call service_enter_dead() in place of service_set_state(), which will transition the service to either SERVICE_DEAD or SERVICE_FAILED as is appropriate. Also, some misleading comments are adjusted: service_stop() is not only called on a user request, but also during an automatic restart in order to handle dependencies. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45511
2012-05-22service: actually delay auto-restart if another job is pendingDavid Ward
https://bugs.freedesktop.org/show_bug.cgi?id=45511
2012-05-22cgtop: change default depth to 3Lennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=49778
2012-05-22Fixed handling of posix_fallocate() returned valueGuillermo Vidal
According to the man pages of posix_fallocate, it returns zero on success or an error number on failure; however, errno is not set on failure. If the kernel or a library other than glibc does not support the function for example, EOPNOTSUPP will be returned and the error will not be handled properly with original code.
2012-05-22systemd-analyze: switch to python getopt for argument parsingShawn Landden
this uses gnu style getopt, so you can put the opts at the end: (e.g.) systemd-analyze blame --user v4
2012-05-21main: allow system wide limits for servicesFrederic Crozat
2012-05-21journald: one more SYSLOG_IDENTIFIER length fixMichal Schmidt
2012-05-21journald: fix length of "SYSLOG_IDENTIFIER="Michal Schmidt
Fixes weird messages like: May 20 22:23:30 jik2 TIFIER=systemd-logind[795]: New session 46 of user gdm. https://bugzilla.redhat.com/show_bug.cgi?id=823498
2012-05-21util: rework in_initrd() logicLennart Poettering
Checking the device major/minor is not a good idea. Let's replace this with an explicit flag file, which we model after /etc/os-release and call /etc/initrd-release.
2012-05-21main: rename a few fix to follow general naming styleLennart Poettering
2012-05-21switch-root: move switch_root() call into its own .c fileLennart Poettering
2012-05-21main: do_switch_root() do not recursively remove across device boundariesHarald Hoyer
2012-05-21util: rm_rf_children() add root_dev parameterHarald Hoyer
if root_dev is set, remove subdirectories only, if the device is the same as the root_dev. This prevents to remove files across device boundaries.
2012-05-21delta/delta.c: initialize bottom for fail stateHarald Hoyer
2012-05-21core/main.c: handle the initrd timestamp differently, if in the initrdHarald Hoyer
If systemd is in the initrd/initramfs, set the initrd timestamp and do not try to read it from the RD_TIMESTAMP environment variable.
2012-05-21core/main.c: do_switch_root(): do not remove the old root if not in initrdHarald Hoyer
Only recursively remove the old root, if we have been in an initrd/initramfs.
2012-05-21core/main.c: add "--switchedroot" parameterHarald Hoyer
If systemd serializes from a switch_root, it adds "--switchedroot" to the systemd in the real root. If "--switchedroot" is found, then we do not skip all the stuff, which is skipped for normal rexecs.
2012-05-21manager: only serialize the timestamps for the initramfs if in_initrd()Harald Hoyer
2012-05-21util.c: add in_initrd()Harald Hoyer
in_initrd() checks, if the stat() for the device for "/" is 1, which it is for the initramfs.
2012-05-21main: corrected do_switch_root()Harald Hoyer
do_switch_root now mount moves "/dev", "/proc", "/sys", "/run" and removes the old root recursively.