| Age | Commit message (Collapse) | Author |
|---|
|
Otherwise building may fail with:
src/basic/user-util.c: In function 'get_home_dir':
src/basic/user-util.c:343:9: error: implicit declaration of function 'secure_getenv' [-Werror=implicit-function-declaration]
|
|
|
|
If you reference another unit with an escaped name, the escaped characters
should remain in the extracted word. This used to work correctly prior to
commit 34f253f0.
The problem can be seen when units with escaped names are referenced.
$ cat "/usr/lib/systemd/system/dev-disk-by\x2dlabel-eos\x2dswap.swap"
[Swap]
What=/dev/disk/by-label/eos-swap
[Install]
WantedBy=dev-disk-by\x2dlabel-eos\x2dswap.device
$ systemctl enable "dev-disk-by\x2dlabel-eos\x2dswap.swap"
Created symlink
/etc/systemd/system/dev-disk-byx2dlabel-eosx2dswap.device.wants/dev-disk-by\x2dlabel-eos\x2dswap.swap,
pointing to /usr/lib/systemd/system/dev-disk-by\x2dlabel-eos\x2dswap.swap.
The wants directory should be created with the x2ds escaped with \.
|
|
(#3037)
It was added in 2.6.39, and causes an assertion to fail when running in mock
hosted on 2.6.32-based RHEL-6:
Assertion 'clock_gettime(map_clock_id(clock_id), &ts) == 0' failed at systemd/src/basic/time-util.c:70, function now(). Aborting.
|
|
Fixes #3047.
|
|
|
|
With any masked unit that would that would be enabled by presets, we'd get:
test@rawhide $ sudo systemctl preset-all
Failed to execute operation: Unit file is masked.
test@rawhide $ sudo systemctl --root=/ preset-all
Operation failed: Cannot send after transport endpoint shutdown
Simply ignore those units:
test@rawhide $ sudo systemctl preset-all
Unit xxx.service is masked, ignoring.
|
|
If the error code ever leaks (we print the strerror error instead of providing
our own), the message for ESHUTDOWN is "Cannot send after transport endpoint
shutdown", which can be misleading. In particular it suggest that some
mishandling of the dbus connection occured. Let's change that to ERFKILL which
has the advantage that a) it sounds implausible as actual error, b) has the
connotation of disabling something manually.
|
|
The comments and the log messages are next to one another, so it's easier
to check that the messages match the comments.
The sign was omitted in the check for -ESHUTDOWN, so it was never matched.
|
|
|
|
Before 0f03c2a4c093 specifying any path would cause the systemctl client
to do the installation itself, instead of going over dbus. Restore that
behaviour.
|
|
daemons, which wish to transition state from the initramfs to the real
root, might use /dev/shm for their state.
As /dev is not relabeled across mount points, /dev/shm has to be
relabled explicitly.
|
|
Fixes: #2889
|
|
sd-bus: query pid also when requesting supplementary gids information
|
|
CID #1354670.
|
|
CID #1354671: char **l would be leaked.
Also rename l to paths, to make the code easier to read,
and do strv deduplication immediately when extending. No need to allocate
strings to remove them a few lines down.
|
|
Just making sure :)
|
|
If the SD_BUS_CREDS_SUPPLEMENTARY_GIDS value is requested, the pid is
queried to find out the supplementary gids value from /proc/pid/status.
Otherwise sd_bus_creds_get_supplementary_gids() won't work unless some
other value in mask triggered fetching the pid information.
|
|
The coccinelle patch didn't work in some places, I have no idea why.
|
|
|
|
Many fixes, in particular to the install logic
|
|
Closes #1602
|
|
choke on ELOOP
ELOOP indicates that there's a symlink in /etc for a native unit file, and
that's completely OK.
|
|
|
|
|
|
Otherwise "systemctl status" will immediately report that our unit file is out
of date.
|
|
|
|
We only use it for the Tx code anyway, hence sd-lldp.h shouldn't expose it, as
it only implements Rx.
|
|
be enabled
We don't allow using config symlinks to enable units, but the error message we
printed was awful. Fix that, and generate a more readable error.
Fixes #3010.
|
|
This new command removes all, or all hidden container images that have been
downloaded.
|
|
We don#t really support systems where XDG_RUNTIME_DIR is not supported for
systemd --user. Hence, let's always set our own XDG_RUNTIME_DIR for tests that
involve systemd --user, so that we know it is set, and that it doesn't polute
the user's actual runtime dir.
|
|
There's no point in first determining the drop-in file name path, then
forgetting it again, and then determining it again. Instead, just generated it
once, and then write to ti directly.
|
|
|
|
This allows dropping all user configuration and reverting back to the vendor
default of a unit file. It basically undoes what "systemctl edit", "systemctl
set-property" and "systemctl mask" do.
|
|
|
|
Exit early, so that we can get rid of the large if block.
|
|
We only use it inside of install.c, hence let's make it static.
|
|
numbers
And port all code over to use it.
|
|
it's unused, and should we need it one day we can always resurrect it from git
history.
|
|
The code previously queries the state of a unit file, but was only interested
in the existance of it, hence let's use unit_file_exists() instead, the same
way the SysV compat code in systemctl does it.
|
|
The SysV compat code checks whether there's a native unit file before looking
for a SysV init script. Since the newest rework generated units will show up in
the unit path, and hence the checks ended up assuming that there always was a
native unit file for each init script: the generated one.
With this change the generated unit file directory is suppressed from the
search path when this check is done, to avoid the confusion.
|
|
Let's keep the code that manipulates LookupPaths together, and move
generator_binary_paths() to the end of the .h and .c files, since it is not
strictly related to that.
|
|
We should log about everything we don't expect.
Also, add a comment for one case were we do not log, on purpose, and make it
use a separate error code.
|
|
|
|
Move the search path check from the SysV service compat support into install.c
so that we can reuse the usual algorithm instead of rolling a private loop for
this.
|
|
Always warn if something fails, and clarify that the involved utility functions
do so in their name.
Drop the REBOOT_PARAM_FILE macro. We don't do this for other flag file paths
like this, so don't do this for this one either. The path isn't configurable
anyway, hence let's make this easier to read by avoiding this one indirection.
|
|
Let's be extra careful with the umask when we use simple fopen(), as this
creates files with 0777 by default.
|
|
With this change the logic for placing transient unit files and drop-ins
generated via "systemctl set-property" is reworked.
The latter are now placed in the newly introduced "control" unit file
directory. The fomer are now placed in the "transient" unit file directory.
Note that the properties originally set when a transient unit was created will
be written to and stay in the transient unit file directory, while later
changes are done via drop-ins.
This is preparation for a later "systemctl revert" addition, where existing
drop-ins are flushed out, but the original transient definition is restored.
|
|
This patch adds a concept of a "control" unit file directory, which is supposed
to be used as place for unit file drop-ins created by "systemctl set-property"
(note that this directory is not actually hooked up to "systemctl set-property"
yet, that's coming in a later patch).
The rationale for this: previously changes made by the user and by "systemctl
set-property" were done in the same directory, which made semantics very
unclear: the changes made by "systemctl set-property" were applied instantly,
and their drop-ins only written to not lose settings on a later "systemctl
daemon-reload", while drop-ins made by the user would only be in effect after
"systemctl daemon-reload". This is particular problematic as the changes made
by "systemctl set-property" would really apply immediately without any respect
for the unit search path. This meant that using "set-property" could have an
effect that is lsot as soon as "daemon-reload" is issued, in case there was a
"later" drop-in already in place.
With this change the directories are seperated, and the "control" directory
always takes the highest priority of all, to avoid any confusion.
|
|
This is too confusing, as this funciton returns the paths to the generator
binaries, while usually when we refer to the just the "generator path" we mean
the generated unit files. Let's clean this up.
|
