summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-01-18build-sys: add autoconf macro to pick macro for x32 compatibilityZbigniew Jędrzejewski-Szmek
2013-01-18nspawn: add audit caps to default set to keepLennart Poettering
Due to the brokeness of much of the userspace audit code we cannot really start too many systems without the audit caps set. To make nspawn easier to use just add the audit caps by default. To boot up containers successfully the kernel's auditing needs to be turned off still (use "audit=0" on the kernel command line), but at least no manual caps have to be passed anymore. In the long run auditing will be fixed for containers and ve virtualized properly at which time it should be safe to enable these caps anyway.
2013-01-18core/cgroup-util: simplify functions and add testsZbigniew Jędrzejewski-Szmek
2013-01-18core/group-util: merge two functionsZbigniew Jędrzejewski-Szmek
2013-01-18systemctl: print the user session journal for user session units.Mirco Tischler
2013-01-18logs-show: add show_journal_by_user_unitMirco Tischler
Print the journal for a user session unit. For now this filters by _SYSTEMD_USER_UNIT and USER_UNIT and additionally _UID.
2013-01-18core: log USER_UNIT instead of UNIT if in user sessionMirco Tischler
2013-01-18journal: log _SYSTEMD_USER_UNIT for user session unitsMirco Tischler
2013-01-18util: modernization and test for load_env_fileZbigniew Jędrzejewski-Szmek
2013-01-18util: continuation support for load_env_fileMichal Vyskocil
Variable definitions can be written on more than one line - if each ends with a backslash, then is concatenated with a previous one. Only backslash and unix end of line (\n) are treated as a continuation. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58083 [zj: squashed two patches together; cleaned up grammar; removed comment about ignoring trailing backslash -- it is not ignored.] Document continuation support in systemd.exec
2013-01-18journal-gatewayd,man: document new HTTPS optionsZbigniew Jędrzejewski-Szmek
2013-01-18journal-gatewayd: return nice error on unsupported methodsZbigniew Jędrzejewski-Szmek
Returns "HTTP/1.0 406 Not Acceptable" instead of silently closing the connection.
2013-01-18journal-gatewayd: allow pipeliningZbigniew Jędrzejewski-Szmek
The request must not be answered immediately (at first call to response_handler()), but on the second. This is also important for authentication, which cannot be performed on the first call. Before: % wget -O/dev/null -S https://localhost:19531/ --2012-11-28 18:29:43-- https://localhost:19531/ Resolving localhost (localhost)... 127.0.0.1 Connecting to localhost (localhost)|127.0.0.1|:19531... connected. HTTP request sent, awaiting response... HTTP/1.1 301 Moved Permanently Connection: close Content-Length: 87 Location: /browse Content-Type: text/html Date: Wed, 28 Nov 2012 17:29:44 GMT Location: /browse [following] --2012-11-28 18:29:43-- https://localhost:19531/browse Connecting to localhost (localhost)|127.0.0.1|:19531... connected. HTTP request sent, awaiting response... HTTP/1.1 200 OK Connection: close Content-Length: 23260 Content-Type: text/html Date: Wed, 28 Nov 2012 17:29:44 GMT Length: 23260 (23K) [text/html] After: % wget --no-check-certificate -O/dev/null -S https://localhost:19531/ --2012-11-28 18:30:05-- https://localhost:19531/ Resolving localhost (localhost)... 127.0.0.1 Connecting to localhost (localhost)|127.0.0.1|:19531... connected. HTTP request sent, awaiting response... HTTP/1.1 301 Moved Permanently Content-Length: 87 Location: /browse Content-Type: text/html Date: Wed, 28 Nov 2012 17:30:05 GMT Location: /browse [following] --2012-11-28 18:30:05-- https://localhost:19531/browse Reusing existing connection to localhost:19531. HTTP request sent, awaiting response... HTTP/1.1 200 OK Content-Length: 23260 Content-Type: text/html Date: Wed, 28 Nov 2012 17:30:06 GMT Length: 23260 (23K) [text/html]
2013-01-18journal-gatewayd: always log oom() in addition to returning errorZbigniew Jędrzejewski-Szmek
2013-01-18share/log: skip file/line/func info if emptyZbigniew Jędrzejewski-Szmek
The new microhttpd logger doesn't know this information. It is better to log nothing than fake values.
2013-01-18share/log: unify two code pathsZbigniew Jędrzejewski-Szmek
Explicit zeroing is replaced with initialization to {0}. No functional change.
2013-01-18journal-gatewayd: redirect microhttpd messages to journalZbigniew Jędrzejewski-Szmek
A prefix ("microhttpd: ") is added to the log lines to make it easy to distinguish the source.
2013-01-18journal-gatewayd: SSL supportZbigniew Jędrzejewski-Szmek
For now the certificates are passed around as options to the program. This might not be the most convenient under "production", but makes for fairly easy testing.
2013-01-18journal-gatewayd: unify two code pathsZbigniew Jędrzejewski-Szmek
In preparation for adding more options, split out the option handling code.
2013-01-18systemctl: add new "get-cgroup-attr" to query current cgroup attribute valueLennart Poettering
Also adds a pair of bus calls for this to the daemon.
2013-01-18systemctl: it's probably a good idea not to alter return parameters if we failLennart Poettering
We generally follow the rule not to touch return values unless we succeed, so for the sake of uniformity do the same here.
2013-01-18systemctl: no need to check this explicitly, we already checked it a few ↵Lennart Poettering
lines up anyway, so let's just assert
2013-01-18systemctl: we can make this faster and shorten it a bit with strv_extend()Lennart Poettering
Now that strv_extend() is not so slow anymore, we can make use of it, to shorten our code a bit.
2013-01-18strv: make strv_extend() smarterLennart Poettering
2013-01-18systemctl: make list-dependencies default to default.targetLennart Poettering
2013-01-18systemctl: we can use nulstr_contains() for this lookupLennart Poettering
It's a bit easier to read...
2013-01-17systemctl add command list-dependenciesLukas Nykryn
systemctl list-dependencies lists all unit's dependecies and recursively expands all subsidiary target units into a tree. Primary purpose for this command is to show all units which are enabled in specified target.
2013-01-17util: fix bad memory accessLennart Poettering
2013-01-17core: corrects check of strduped controller stringNestor Ovroy
In commit 246aa6d (core: add bus API and systemctl commands for altering cgroup parameters during runtime), when rewriting unit_add_one_default_cgroup to prefered style, the check of strduped b->controller was incorrectly changed to check the containing structure. Correct it.
2013-01-17service: properly signal permanent failure of a service to its socketLennart Poettering
This makes sure that a service is not indefinitely restarted in a tight loop if it fails before it is able to process its socket. This corrects the breakage introduced with 8d1b002a2e389e79a2414491523de549783abf73. Shame on me.
2013-01-17udev: net_id - suppress bcma core == 0Kay Sievers
2013-01-17units: for all unit settings that take lists, allow the empty string for ↵Lennart Poettering
resetting the lists https://bugzilla.redhat.com/show_bug.cgi?id=756787
2013-01-17dbus: add Unit's PartOf and ConsistsOf deps to introspection XMLLennart Poettering
2013-01-17udev: net_id - handle "bcma" busesKay Sievers
2013-01-17udev: path_id - clarify comment about the kernel ATA naming problemKay Sievers
2013-01-16service: ignore dependencies on $syslog and $local_fs in LSB scriptsLennart Poettering
We no longer allow early-boot init scripts, however in late boot the syslog socket and local mounts are established anyway, so let's simplify our dep graph a bit. If $syslog doesn't resolve to syslog.target anymore there's no reason to keep syslog.target around anymore. Let's remove it. Note that many 3rd party service unit files order themselves after syslog.target. These will be dangling dependencies now, which should be unproblematic, however.
2013-01-16systemctl,loginctl,cgls: do not ellipsize cgroup members when --full is ↵Lukas Nykryn
specified New file output.h with output flags and modes. --full parameter also for cgls and loginctl. Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup, show_cgroup_and_extra, show_cgroup_and_extra_by_spec). get_process_cmdline with max_length == 0 will not ellipsize output. Replace LINE_MAX with 0 in some calls of get_process_cmdline. [zj: Default to --full when under pager for clgs. Drop '-f' since it wasn't documented and didn't actually work. Reindent a bit. ]
2013-01-16logs-show: automatic cleanupZbigniew Jędrzejewski-Szmek
2013-01-16shutdown: ignore loop devices without a backing fileKay Sievers
2013-01-16service: sysv - remove distribution specific targetsKay Sievers
Systemd should not introduce any new facilities. Distributions which still need to support their non-standard/legacy facilities should add them as patches to their packaging. The following facilities are no longer recognized: $x-display-manager $mail-transfer-agent $mail-transport-agent $mail-transfer-agent $smtp $null This target is no longer available: mail-transfer-agent.target
2013-01-16shutdown: in the final umount loop don't use MNT_FORCELennart Poettering
MNT_FORCE is honoured by NFS and FUSE and allows unmounting of the FS even if consumers still use it. For our brute-force loop we rely on EBUSY being reported as long as a file system is still used by a loopback device or suchlike. Hence, drop MNT_FORCE to make EBUSY reliable.
2013-01-15systemctl: fix assertion hit by incorrect comparisonDave Reisner
2013-01-15load-fragment: fix bad memory accessLennart Poettering
2013-01-15load-fragment: replace specifiers in path unit's Unit= settingLennart Poettering
2013-01-15core: do not make sockets dependent on loMichał Bartoszkiewicz
/sys/subsystem/net/devices/lo is never considered active, so sockets with BindToDevice=lo would never be activated.
2013-01-15journalctl: quit on I/O errorDavid Herrmann
This makes journalctl quit on ferror() conditions on stdout. It fixes an annoying bug if you pipe its output through 'less' and press 'q'. Without this fix journalctl will continue reading all journal data until EOF which can take quite some time. For instance on my machine: david-nb ~ # time journalctl | wc -l 327240 real 1m13.039s user 1m0.217s sys 0m10.467s However, expected behavior is journalctl to quit when its pager closed the output pipe. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
2013-01-15logind: remove unused variableMichal Sekletar
2013-01-15core: use correct argument of type JobResultMichal Sekletar
2013-01-15vconsole: use /dev/vcsa1-15 to check for allocated VTsKay Sievers
2013-01-15vconsole: copy font to tty1-15Kay Sievers
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-16 08:28:49 +0000