| Age | Commit message (Collapse) | Author |
|---|
|
None of the callers take advantage of this parameter, it's always NULL,
this is just a private helper function to simplify the call sites so
drop the template parameter altogether. If a caller emerges later who
needs it, it can be restored.
|
|
Introduces mmap_try_harder()
|
|
Functions dereferencing these members should assert their non-NULL state.
|
|
Just some additional asserts in functions dereferencing f->header.
|
|
|
|
Fixes: #2361
|
|
|
|
events correctly
|
|
Fixes: #2514
|
|
When we enter the running state we should forget about any control processes, in all cases, and not just when hit a
reload timeout...
|
|
Let's use bitfields for our booleans, and don't try to apply binary OR or addition on them, because that's weird and we
should instead use logical OR only.
|
|
We really shouldn't fail silently, but print a log message about these errors. Also make sure to attach error codes to
all log messages where that makes sense.
(While we are at it, add a couple of (void) casts to functions where we knowingly ignore return values.)
|
|
This makes sure we never run two control processes at the same time, we cannot keep track off.
This introduces a slight change of behaviour but cleans up the definition of ExecStop= and ExecStopPost=. The former is
now invoked only if the service managed to start-up correctly. The latter is called even if start-up failed half-way.
Thus, ExecStopPost= may be used as clean-up step for both successful and failed start-up attempts, but ExecStop='s
purpose is clearly defined as being responsible for shutting down the service and nothing else.
The precise behaviour of this was not documented yet. This commit adds the necessary docs.
Fixes: #1254
|
|
they do
|
|
Let's make sure we don't choke if blkid_probe_lookup_value() returns a NULL string.
Also, make sur we propagate the correct error when blkid_probe_lookup_value() fails.
|
|
|
|
This adds a new switch --as-pid2, which allows running commands as PID 2, while a stub init process is run as PID 1.
This is useful in order to run arbitrary commands in a container, as PID1's semantics are different from all other
processes regarding reaping of unknown children or signal handling.
|
|
For use in timesyncd we already defined a compile-time "epoch" value, which is based on the mtime of the NEWS file, and
specifies a point in time we know lies in the past at runtime. timesyncd uses this to filter out nonsensical timestamp
file data, and bump the system clock to a time that is after the build time of systemd. This patch adds similar bumping
code to earliest PID 1 initialization, so that the system never continues operation with a clock that is in the 1970ies
or even 1930s.
|
|
Fixes: #2192
|
|
dhcp: delay restarts after NAKs (v4)
|
|
Load SELinux labelling systemd in systemd-logind
|
|
mount-setup: introduce mount_points_setup
|
|
manager: print fatal error if early mount failed
|
|
journalctl: add match for the current boot when called with devpath (v2)
|
|
journalctl --fields logic
|
|
|
|
tmpfiles: don't skip path_set_perms on error
|
|
The mount_setup_early() can fail and if it will occur, there is
no sense to make selinux setup and etc.
|
|
systemd-logind uses mkdir_label and label_fix functions without calling
first mac_selinux_init. This makes /run/user/$UID/ directories not
labelled correctly on an Arch Linux system using SELinux.
Fix this by calling mac_selinux_init("/run") early in systemd-logind.
This makes files created in /etc/udev/rules.d and /var/lib/systemd to be
labelled through transitions in the SELinux policy instead of using
setfscreatecon (with mac_selinux_create_file_prepare).
|
|
The mount_setup_early() and mount_setup() contain almost the same
pieces of code which calls mount_one() for a certain mount point
from the mount_table. This patch introduces mount_points_setup()
helper to prevent code duplication.
|
|
journalctl: make "journalctl /dev/sda" work
|
|
Currently when journalctl is called with path to block device node we
add following match _KERNEL_DEVICE=b$MAJOR:$MINOR.
That is not sufficient to actually obtain logs about the disk because
dev_printk() kernel helper puts to /dev/kmsg information about the
device in following format, +$SUBSYSTEM:$ADDRESS,
e.g. "+pci:pci:0000:00:14.0".
Now we will walk upward the syspath and add match for every device in
format produced by dev_printk() as well as match for its device node if
it exists.
|
|
The server might answer to a DHCPREQUEST with a NAK and currently the
client restarts the configuration process immediately. It was
observed that this can easily generate loops in which the network is
flooded with DISCOVER,OFFER,REQUEST,NAK sequences.
RFC 2131 only states that "if the client receives a DHCPNAK message,
the client restarts the configuration process" without further
details.
Add a delay with exponential backoff between retries after NAKs to
limit the number of requests and cap the delay to 30 minutes.
|
|
This was missing in 39fd5b08a73f144a20202a665bd25cad51d8a90b.
|
|
No need to store the object and offset data if we don't actually need it ever.
|
|
Fixes #2176
|
|
This adds two new calls to get the list of all journal fields names currently in use.
This is the low-level support to implement the feature requested in #2176 in a more optimized way.
|
|
actually verify it
|
|
Fixes: #2338
|
|
|
|
This clean-ups timeout handling in PID 1. Specifically, instead of storing 0 in internal timeout variables as
indication for a disabled timeout, use USEC_INFINITY which is in-line with how we do this in the rest of our code
(following the logic that 0 means "no", and USEC_INFINITY means "never").
This also replace all usec_t additions with invocations to usec_add(), so that USEC_INFINITY is properly propagated,
and sd-event considers it has indication for turning off the event source.
This also alters the deserialization of the units to restart timeouts from the time they were originally started from.
Before this patch timeouts would be restarted beginning with the time of the deserialization, which could lead to
artificially prolonged timeouts if a daemon reload took place.
Finally, a new RuntimeMaxSec= setting is introduced for service units, that specifies a maximum runtime after which a
specific service is forcibly terminated. This is useful to put time limits on time-intensive processing jobs.
This also simplifies the various xyz_spawn() calls of the various types in that explicit distruction of the timers is
removed, as that is done anyway by the state change handlers, and a state change is always done when the xyz_spawn()
calls fail.
Fixes: #2249
|
|
Make sure we can properly process resource limit properties. Specifically, allow transient configuration of both the
soft and hard limit, the same way from the unit files. Previously, only the the hard rlimits could be configured but
they'd implicitly spill into the soft hard rlimits.
This also updates the client-side code to be able to parse hard/soft resource limit specifications. Since we need to
serialize two properties in bus_append_unit_property_assignment() now, the marshalling of the container around it is
now moved into the function itself. This has the benefit of shortening the calling code.
As a side effect this now beefs up the rlimit parser of "systemctl set-property" to understand time and disk sizes
where that's appropriate.
|
|
clang is apparently not smart enough to detect when a switch statement contains case statements for all possible values
of the used type. Work around that.
(And while we are at it, normalize indentation a bit)
Fixes: #2504
|
|
Let's write the property name and value in one call, when that's possible, shorthing our code a bit.
|
|
Let's simplify things a bit, and make sure we don't lose accuracy.
|
|
Clear up some confusion regarding the USec and Sec suffixes we use. In configuration files we usually use the Sec
suffix, to indicate the implied time unit if none is specified. The respective bus properties however use the USec
property, since they expose 64bit unsigned integers containing time in µs.
Before this patch timer units exposed a bus property AccuracyUSec (which hence is the correct name) but when parsing
transient property data would look for AccuracySec instead (which is incorrect). This patch ensures we look for
AccuracySec correctly, but keeps the code for AccuracyUSec in place for compatibility, but adds a warning to ensure
that apps are updated to use the right property.
|
|
This formats a struct rlimit the way rlimit_parse() expects it.
|
|
partition table
Fixes: #2483
|
|
This way we can reuse it for parsing rlimit settings in "systemctl set-property" and related commands.
|
|
This adds a new timestamp field to the Unit struct, storing when the last low-level state change took place, and make
sure this is restored after a daemon reload. This new field is useful to allow restarting of per-state timers exactly
where they originally started.
|
