| Age | Commit message (Collapse) | Author |
|---|
|
load-fragment.c
The parse code actually checked for specific lvalue names, which is
really wrong for supposedly generic parsers...
|
|
Let's keep specific config parsers close to where they are needed. Only
the really generic ones should be defined in conf-parser.[ch].
|
|
Let's make the scope of the show-status stuff a bit smaller, and make it
private to the core, rather than shared API in shared/.
|
|
"level" is a bit too generic, let's clarify what kind of level we are
referring to here.
|
|
startup
This is needed to give USB docking stations and suchlike time to settle,
so that a display connected to an USB docking station can actually act
as a lid swith inhibitor correctly.
With this change we should have somewhat reliable docking station
support in place.
|
|
|
|
Previously we expected the desktop environment to take an inhibitor
lock, but this opened a race on boot-up where logind might already be
running but no DE is active.
Hence, let's move checking for additional displays into logind. This
also opens up this logic for other DEs, given that only GNOME
implemented the inhibitor logic so far.
|
|
As discussed on the ML these are useful to manage runtime directories
below /run for services.
|
|
|
|
allocate a thread
|
|
|
|
|
|
This is necessary when mounting /dev/nfs based on a DHCP lease.
|
|
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
|
|
Things like 3B4T, 4B50B, 400 100 (meaning 4*1024**4+3, 54, and 500,
respectively) are now disallowed. It is necessary to say 4T3B, 54B,
500 instead. I think this was confusing and error prone.
As a special form, 400B 100 is allowed, i.e. "B" suffix is treated
as different from "", although they mean the same thing.
|
|
It seems natural to be able to say SystemMaxUsage=1.5G.
https://bugzilla.redhat.com/show_bug.cgi?id=1047568
|
|
|
|
Running 'systemd-nspawn -D /srv/Fedora/' gave me this error:
Failed to read /proc/self/loginuid: No such file or directory
Container Fedora failed with error code 1.
This patch fixes the problem.
|
|
|
|
|
|
Add Tilera's TILE-GX processor family support.
|
|
This is mostly a proof of concept to try sd-network, so we don't
hook it up with a .service file quite yet. We probably want it to
be more clever about deciding when we are 'online'.
The binary will wait for at least one network managed by networkd,
and until all networks managed by networkd are configured.
|
|
This is similar to sd-login, but exposes the state of networkd rather than logind.
Include it in libsystemd-dhcp and rename it to libsystemd-network.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1038015
The problem seems to be that the your virtual DVD is emulating a really
old DVD device, and doing it kind of strangely.
> dracut:# /lib/udev/cdrom_id --debug /dev/sr0
> probing: '/dev/sr0'
> INQUIRY: [IMM ][Virtual CD/DVD ][0316]
> GET CONFIGURATION failed with SK=5h/ASC=24h/ACQ=00h
So your virtual drive rejects the GET CONFIGURATION command as illegal.
Other pre-MMC2 drives that don't accept this command usually return the
error
SK=5h,ASC=20h (invalid/unsupported command code), in which case cdrom_id
tries an older method, and then ID_CDROM_MEDIA_TRACK_COUNT_DATA gets set
and all the /dev/disk/by-label (etc) links get set up.
The virtual drive returns the error SK=5h,ASC=24h (invalid field in
Command Descriptor Block), which cdrom_id doesn't handle, so it gives up
and the links never get made.
The ideal solution would be to make the IMM to emulate a device that's
less than 15 years old, but I'm not going to hold my breath waiting for
that.
So probably cdrom_id should also use the old MMC fallback when the error
is SK=5h,ASC=24h, and then all of this would work as expected.
Suggested-by:Luca Miccini <lmiccini@redhat.com>
|
|
Positional arguments only make sense with the default action.
For other actions, complain instead of ignoring them silently.
|
|
If a message had zero length, journalctl would print no newline, and
two output lines would be concatenated. Fix. The problem was
introduced in commit 31f7bf199452 ("logs-show: print multiline
messages"). Affected short and verbose output modes.
Before fix:
Feb 09 21:16:17 glyph dhclient[1323]: Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit
after:
Feb 09 21:16:17 glyph dhclient[1323]:
Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit
|
|
|
|
|
|
|
|
|
|
This partially reverts 41a55c46ab8fb4ef6727434227071321fc762cce
Some specifications we want to stay compatibility actually document
/var/run, not /run, and we should stay compatible with that. In order to
make sure our D-Bus implementation works on any system, regardless if
running systemd or not, we should always use /var/run which is the
only path mandated by the D-Bus spec.
Similar, glibc hardcodes the utmp location to /var/run, and this is
exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this
public API, too.
We simply do not support systems where /var/run is not a symlink → /run.
Hence both are equivalent. Staying compatible with upstream
specifications hence weighs more than cleaning up superficial
appearance.
|
|
/run was already used almost everywhere, fix the remaining places
for consistency.
|
|
|
|
This new unit settings allows restricting which address families are
available to processes. This is an effective way to minimize the attack
surface of services, by turning off entire network stacks for them.
This is based on seccomp, and does not work on x86-32, since seccomp
cannot filter socketcall() syscalls on that platform.
|
|
|
|
for us
|
|
|
|
|
|
If we evict a session position, we open the position slot for future
sessions. However, there might already be another session on the same
position if both were started on the same VT. This is currently done if
gdm spawns the session on its own Xserver.
Hence, look for such a session on pos-eviction and claim the new slot
immediately.
|
|
GREEDY_REALLOC takes a pointer to the real size, not the array-width as
argument. Therefore, our array is currently way to small to keep the seat
positions.
Introduce GREEDY_REALLOC0_T() as typed version of GREEDY_REALLOC and store
the array-width instead of array-size.
|
|
container
|
|
As pointed-out by clang -Wunreachable-code.
No behaviour changes.
|
|
This way we make this more network/container transparent and also do not
require any client side privileges.
|
|
remotely
|
|
BlockIOAccounting= for all units at once
|
|
|
|
|
|
With loaded_policy set to true mount_setup() relabels /dev properly.
|
|
Systemd creates directories in /dev. These directories will
get the label of systemd, which is the label of the System
domain, which is not accessable to everyone. Relabel the
directories, files and symlinks created so that they can be
generally used.
Based on a patch by Casey Schaufler <casey@schaufler-ca.com>.
|
|
We are not parsing timezone data.
|
