summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-12-19LLDP: Add support for networkctlSusant Sahani
2014-12-19networkd: integrate LLDPSusant Sahani
This patch integrates LLDP with networkd. Example conf: file : lldp.network [Match] Name=em1 [Network] LLDP=yes
2014-12-19networkd: Introduce Link Layer Discovery Protocol (LLDP)Susant Sahani
This patch introduces LLDP support to networkd. it implements the receiver side of the protocol. The Link Layer Discovery Protocol (LLDP) is an industry-standard, vendor-neutral method to allow networked devices to advertise capabilities, identity, and other information onto a LAN. The Layer 2 protocol, detailed in IEEE 802.1AB-2005.LLDP allows network devices that operate at the lower layers of a protocol stack (such as Layer 2 bridges and switches) to learn some of the capabilities and characteristics of LAN devices available to higher layer protocols.
2014-12-19networkctl: port to verbs helperTom Gundersen
2014-12-19systemd-hwdb: port to new verbs helperTom Gundersen
2014-12-19import: dck - fix curl error handlingTom Gundersen
2014-12-19import: add new minimal tool "systemd-import" for pulling down foreign ↵Lennart Poettering
containers and install them locally This adds a simply but powerful tool for downloading container images from the most popular container solution used today. Use it like this: # systemd-import pull-dck mattdm/fedora # systemd-nspawn -M fedora This will donwload the layers for "mattdm/fedora", and make them available locally as /var/lib/container/fedora. The tool is pretty complete, as long as it's only about pulling down images, or updating them. Pushing or searching is not supported yet.
2014-12-19util: add generalization of verb parsing for command line toolsLennart Poettering
We should move loginctl, timedatectl, machinectl over to use this new API instead of a manual one.
2014-12-19util: make sure rm_rf() can be called on symlinks (with the effect of ↵Lennart Poettering
deleting it)
2014-12-19strv: ass new strv_is_uniq() and strv_reverse() callsLennart Poettering
2014-12-19execute: the runtime directory can only be on tmpfs, hence don't use ↵Lennart Poettering
rm_rf_dangerous() needlessly
2014-12-19nss-myhostname: introduce is_gateway() similar to the existing is_hostname()Lennart Poettering
2014-12-18load-fragment: allow quoting in command name and document allowed escapesZbigniew Jędrzejewski-Szmek
The handling of the command name and other arguments is unified. This simplifies things and should make them more predictable for users. Incidentally, this makes ExecStart handling match the .desktop file specification, apart for the requirment for an absolute path. https://bugs.freedesktop.org/show_bug.cgi?id=86171
2014-12-18Treat a trailing backslash as an errorZbigniew Jędrzejewski-Szmek
Commit a2a5291b3f5 changed the parser to reject unfinished quoted strings. Unfortunately it introduced an error where a trailing backslash would case an infinite loop. Of course this must fixed, but the question is what to to instead. Allowing trailing backslashes and treating them as normal characters would be one option, but this seems suboptimal. First, there would be inconsistency between handling of quoting and of backslashes. Second, a trailing backslash is most likely an error, at it seems better to point it out to the user than to try to continue. Updated rules: ExecStart=/bin/echo \\ → OK, prints a backslash ExecStart=/bin/echo \ → error ExecStart=/bin/echo "x → error ExecStart=/bin/echo "x"y → error
2014-12-18test-strv: use STRV_MAKEZbigniew Jędrzejewski-Szmek
2014-12-18tree-wide: make condition_free_list return NULLZbigniew Jędrzejewski-Szmek
2014-12-18core: make exec_command_free_list return NULLZbigniew Jędrzejewski-Szmek
2014-12-18test-cap-list: allow mismatch in caseZbigniew Jędrzejewski-Szmek
2014-12-18path-util: fix breakage in path_is_mount_pointDave Reisner
This fixes 2 problems introduced by 6feeeab0bc: 1) If name_to_handle_at returns ENOSYS for the child, we'll wrongly return -ENOSYS when it returns the same for the parent. Immediately jump to the fallback logic when we get ENOSYS. 2) If name_to_handle_at returns EOPNOTSUPP for the child but suceeds for the parent, we'll be comparing an uninitialized value (mount_id) to an initialized value (mount_id_parent). Initialize the mount_id variables to invalid mount_ids to avoid this.
2014-12-18systemd-hwdb: introduce new toolTom Gundersen
This pulls out the hwdb managment from udevadm into an independent tool. The old code is left in place for backwards compatibility, and easy of testing, but all documentation is dropped to encourage use of the new tool instead.
2014-12-18networkd: add FDB supportAlin Rauta
2014-12-18journal: next_with_matches() now does not need a mapped object as inputMichal Schmidt
Now that journal_file_next_entry() does not need a pointer to the current object, next_with_matches() does not need it either.
2014-12-18journal: journal_file_next_entry() does not need pointer to current ObjectMichal Schmidt
The current offset is sufficient information.
2014-12-18journal: optimize iteration by returning previously found candidate entryMichal Schmidt
In next_beyond_location() when the JournalFile's location type is LOCATION_SEEK, it means there's nothing to do, because we already have the location of the candidate entry. Do an early return. Note that now next_beyond_location() does not anymore guarantee on return that the entry is mapped, but previous patches made sure the caller does not care. This optimization is at least as good as "journal: optimize iteration: skip files that cannot improve current candidate entry" was. Timing results on my workstation, using: $ time ./journalctl -q --since=2014-06-01 --until=2014-07-01 > /dev/null Before "Revert "journal: optimize iteration: skip files that cannot improve current candidate entry": real 0m5.349s user 0m5.166s sys 0m0.181s Now: real 0m3.901s user 0m3.724s sys 0m0.176s
2014-12-18journal: optimize iteration by skipping exhausted filesMichal Schmidt
If from a previous iteration we know we are at the end of a journal file, don't bother looking into the file again. This is complicated by the fact that the EOF does not have to be permanent (think of "journalctl -f"). So we also check if the number of entries in the journal file changed. This optimization has a similar effect as "journal: optimize iteration: skip whole files behind current location" had.
2014-12-18journal: drop unnecessary parameters of next_beyond_location()Michal Schmidt
offset is redundant, because the caller can rely on f->current_offset. The object pointer the function saves in *ret is thrown away by the caller.
2014-12-18journal: remove redundant variable new_offsetMichal Schmidt
The file's current_offset is already updated at this point, so let's use it.
2014-12-18journal: compare candidate entries using JournalFiles' locationsMichal Schmidt
When comparing the locations of candidate entries, we can rely on the location information stored in struct JournalFile.
2014-12-18journal: simplify set_location()Michal Schmidt
set_location() is called from real_journal_next() when a winning entry has been picked from among the candidates in journal files. The location type is always set to LOCATION_DISCRETE. No need to pass it as a parameter. The per-JournalFile location information is already updated at this point. No need for having the direction and offset here.
2014-12-18journal: keep per-JournalFile location info during iterationMichal Schmidt
In next_beyond_location() when we find a candidate entry in a journal file, save its location information in struct JournalFile. The purpose of remembering the locations of candidate entries is to be able to save work in the next iteration. This patch does only the remembering part. LOCATION_SEEK means the location identifies a candidate entry. When a winner is picked from among candidates, it becomes LOCATION_DISCRETE. LOCATION_TAIL here signifies we've iterated the file to the end (or the beginning in the case of reversed direction).
2014-12-18journal: abstract the resetting of JournalFile's locationMichal Schmidt
2014-12-18journal: move definition of LocationType to journal-file.hMichal Schmidt
In preparation for individual JournalFiles maintaining a location of their own.
2014-12-18Revert "journal: optimize iteration: skip whole files behind current location"Michal Schmidt
This reverts commit b7c88ab8cc7d55a43450bf3dea750f95f2e910d6. This optimization will be made redundant by the following patches.
2014-12-18Revert "journal: optimize iteration: skip files that cannot improve current ↵Michal Schmidt
candidate entry" This reverts commit f8b5a3b75fb55f0acb85c21424b3893c822742e9. This optimization will be made redundant by the following patches.
2014-12-18journal: delete unused function journal_file_skip_entry()Michal Schmidt
Its only caller is a test.
2014-12-18journal: delete unused function journal_file_move_to_entry_by_offset()Michal Schmidt
2014-12-18core: use raw_clone instead of fork in signal handlerZbigniew Jędrzejewski-Szmek
fork() is not async-signal-safe and calling it from the signal handler could result in a deadlock when at_fork() handlers are called. Using the raw clone() syscall sidesteps that problem. The tricky part is that raise() does not work, since getpid() does not work. Add raw_getpid() to get the real pid, and use kill() instead of raise(). https://bugs.freedesktop.org/show_bug.cgi?id=86604
2014-12-18test-unit-file: add test for semicolon escapingZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=87393
2014-12-17load-fragment: properly unescape \;tomsod-m ya ru
https://bugs.freedesktop.org/show_bug.cgi?id=87393
2014-12-17path: make the check for unsupported name_to_handle_at symmetricZbigniew Jędrzejewski-Szmek
If child supports, but the parent does not, or when the child does not support, but the parent does, assume the child is a mount point. Only if neither supports use the fallback.
2014-12-17path: follow symbolic link for parent path (2)Umut Tezduyar Lindskog
c0e57ba9e22ee937722958d8b912ade2a37f206d fixed the fallback path. We should do the same for name_to_handle_at().
2014-12-18machinectl: add new commands for copying files from/to containersLennart Poettering
2014-12-18util: in make_stdio() use dup2() rather than dup3()Lennart Poettering
dup3() allows setting O_CLOEXEC which we are not interested in. However, it also fails if called with the same fd as input and output, which is something we don't want. Hence use dup2(). Also, we need to explicitly turn off O_CLOEXEC for the fds, in case the input fd was O_CLOEXEC and < 3.
2014-12-18machinectl: implement "bind" command to create additional bind mounts from ↵Lennart Poettering
host to container during runtime
2014-12-17nspawn: fix invocation of the raw clone() system call on s390 and crisKen Werner
Since the order of the first and second arguments of the raw clone() system call is reversed on s390 and cris it needs to be invoked differently.
2014-12-16path: follow symbolic link for parent pathUmut Tezduyar Lindskog
[zj: When we lstat the target path, symlinks above the last component will be followed by both stat and lstat. So when we look at the parent, we should follow symlinks.]
2014-12-17shared: strv - add strv_clear()Tom Gundersen
This frees the elements of the strv without freeing the strv itself.
2014-12-16shared: path-util - memory leakTom Gundersen
2014-12-16udev: net_setup - fix warningTom Gundersen
2014-12-16test-json: use fabsThomas Hindoe Paaboel Andersen