summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-06-28doc: grammatical correctionsJan Engelhardt
2014-06-27libudev: queue - watch entire directory to allow the re-use of the watch ↵Kay Sievers
descriptor
2014-06-27journald: make MaxFileSec really default to 1monthMichał Bartoszkiewicz
journald.conf(5) states that the default for MaxFileSec is one month, but the code didn't respect that.
2014-06-27coredump: simplify compression logic a bitLennart Poettering
This also make sure we remove the original coredump temporary file if we successfully managed to compress the coredump.
2014-06-27coredump: replace Compression= setting by simpler Compress= boolean settingLennart Poettering
Let's move things closer to journald's configuration settings, which knows Compress= already, as a boolean. This makes things more uniform, but also gives us more freedom to possibly swap out the used compression algorithm one day.
2014-06-27coredump: don't expose the compression level as configuration optionLennart Poettering
This sounds overly low-level and implementation-detaily. Let's just use the default level XZ suggests. This gives us more room to possibly swap out the compression algorithm used, as the compression level range will not leak into user configuration.
2014-06-27journald: invoking fstatvfs() is now redundant in the vacuuming codeLennart Poettering
2014-06-27coredump: don't be annoyed if another coredump hook removes our coredump ↵Lennart Poettering
while we work on it
2014-06-27coredump: fix how the compression level is verifiedLennart Poettering
2014-06-27coredump: add simple coredump vacuumingLennart Poettering
When disk space taken up by coredumps grows beyond a configured limit start removing the oldest coredump of the user with the most coredumps, until we get below the limit again.
2014-06-27main: uid_to_name() might fail due to OOM, protect against thatLennart Poettering
2014-06-27libudev: queue provide file descriptor to watch busy event queueKay Sievers
2014-06-27libudev: fix udev_queue_get_queue_is_empty() logicKay Sievers
2014-06-27coredumpctl: fix potential deref of null pointerThomas Hindoe Paaboel Andersen
2014-06-27coredump: make sure variable is set if uncompressedThomas Hindoe Paaboel Andersen
reorder the code so the fstat is done before we can jump to uncompressed
2014-06-26coredumpctl: remove unused variableThomas Hindoe Paaboel Andersen
2014-06-26coredump: fix debug messageThomas Hindoe Paaboel Andersen
typo from 347272731e15d3c4a70fad7ccd7185e8e8059d01
2014-06-26sd-dhcp6-client: Implement Rapid CommitPatrik Flykt
Add a Rapid Commit option to Solicit messages and expect a Reply to be received instead of an Advertise. When receiving a DHCPv6 message from the server in state Solicit, continue testing whether the message is a Reply. Ease up the message type checking, it's not fatal if the message is of a wrong type. Add helper functions to set/get the rapid commit of a lease. See RFC 3315, sections 17., 17.1.2., 17.1.4. and 18.1.8.
2014-06-26sd-dhcp6-client: Implement Renew and RebindPatrik Flykt
Start sending Renew and Rebind DHCPv6 messages when respective timers T1 and T2 expire. Rebind messages do not include a Server ID option and the Rebind procedure ends when the last IPv6 address valid lifetime expires, whereafter the client restarts the address acquisition procedure by Soliciting for available servers. See RFC 3315, sections 18.1.3. and 18.1.4. for details.
2014-06-26sd-dhcp6-lease: Add helper function to compute remaining expiry timePatrik Flykt
Create a helper function to compute the remaining time in seconds from time T2 to the IPv6 address with the longest lifetime. The computed time is used as the Maximum Retransmission Duration in Rebinding state. See RFC 3315, section 18.1.4. for details.
2014-06-26sd-dhcp6-client: Add Option Request Option supportPatrik Flykt
Provide a function to request more options from the DHCPv6 server. Provide a sensible default set at startup and add test basic test cases for the intended usage. Define DNS and NTP related option codes and add comments for the unassigned codes.
2014-06-26networkd: Properly stop router solicitation and DHCPv6 clientPatrik Flykt
When a link fails or looses carrier, always stop ongoing router solicitation and any DHCPv6 client that may be running.
2014-06-26sd-icmp6-nd: Add function to stop ongoing ICMPv6 discoveryPatrik Flykt
In some use cases stopping an ongoing ICMPv6 discovery is more useful than always unreferencing the whole structure.
2014-06-26sd-dhcp6-client: return NULL from _unref() like the other sd-* librariesPatrik Flykt
In order to keep the refcounting working, a DONT_DESTROY macro similar to the one in sd-bus has been added also to DHCPv6.
2014-06-26timer: name the stamp file consistentlyMichał Bartoszkiewicz
The stamp file for systemd --user timers was named stamp-foo.timer if XDG_DATA_HOME was unset, but foo.timer otherwise.
2014-06-26coredumpctl: fix HAVE_XZ checkDaniel Mack
2014-06-26coredumpctl: fix build with !HAVE_XZDaniel Mack
Fixes the following build error: CCLD coredumpctl src/journal/coredumpctl.o: In function `save_core': /src/systemd-master/src/journal/coredumpctl.c:656: undefined reference to `decompress_stream' collect2: error: ld returned 1 exit status make[2]: *** [coredumpctl] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2
2014-06-26core/transaction: fix cycle break attempts outside transactionUoti Urpala
Patch fixes some incorrect-looking code in transaction.c. It could fix cases where Debian users with bad package configurations had systemd go into an infinite loop printing messages about breaking an ordering cycle, though I have not reproduced that problem myself. transaction_verify_order_one() considers jobs/units outside current transaction when checking whether ordering dependencies cause cycles. It would also incorrectly try to break cycles at these jobs; this cannot work, as the break action is to remove the job from the transaction, which is a no-op if the job isn't part of the transaction to begin with. The unit_matters_to_anchor() test also looks like it would not work correctly for non-transaction jobs. Add a check to verify that the unit is part of the transaction before considering a job a candidate for deletion. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752259
2014-06-26core: Don't require cgroups xattr supportTom Hirst
Failure to mount cgroups with xattr should not be fatal
2014-06-26core: use correct format string for UIDsMichał Bartoszkiewicz
2014-06-26man: add coredump.conf(5)Zbigniew Jędrzejewski-Szmek
2014-06-26coredump+coredumpctl: add COREDUMP_FILENAME, use in coredumpctlZbigniew Jędrzejewski-Szmek
2014-06-26coredump: make compression configurableZbigniew Jędrzejewski-Szmek
Add Compression={none,xz} and CompressionLevel=0-9 settings. Defaults are xz/6. Compression=filesystem may be added later. I picked "xz" for the compression "type", since we might want to add different compressors later on. XZ is fairly memory and CPU intensive, and embedded users will likely want to use LZO or some other lightweight compression mechanism.
2014-06-26coredump: compress core filesZbigniew Jędrzejewski-Szmek
Unfortunately the core is first written uncompressed, then compressed by reading from disk and writing to the output file. This is ugly and slow, but I don't see a way around, if we want to get the backtrace without keeping everything in memory.
2014-06-26journal/compress: add stream compression/decompression functionsZbigniew Jędrzejewski-Szmek
2014-06-26journal/compress: simplify compress_blobZbigniew Jędrzejewski-Szmek
2014-06-26shutdown: rework messages during shutdownZbigniew Jędrzejewski-Szmek
When running in 'quiet' mode, the only message printed from shutdown binary would be 'Cannot finalize remaining file systems and devices, giving up.', the only log line at error level before switch back to initramfs. This is misleading, because in initramfs everything will be cleaned up properly. Avoid printing anything at error level before the attempt to switch back to initramfs. Rework the messages to contain a bit more information what is still remaining, to help people diagnose shutdown issues.
2014-06-26sysv-generator: fix incorect ordering of WantsThomas Hindoe Paaboel Andersen
2014-06-25systemctl: add new "is-system-running" command to check whether system is ↵Lennart Poettering
fully up https://bugs.freedesktop.org/show_bug.cgi?id=66926
2014-06-25fsck: consider a fsck implementation linked to /bin/true non-existantLennart Poettering
2014-06-25tests: add test-compressRonny Chevalier
2014-06-24sysv-generator: rename PidFile to PIDFileThomas Hindoe Paaboel Andersen
Spotted by Alexey Shabalin
2014-06-24use more _cleanup_ macroRonny Chevalier
2014-06-24sd-dhcp6-client: use %m instead of strerror(errno)Ronny Chevalier
2014-06-24switch-root: create essential base directories at system bootupKay Sievers
This allows us to bootup a rootfs with a /usr directory only.
2014-06-24sd-dhcp-client: return NULL from _unref() like the other sd-* librariesTom Gundersen
Let's keep this behavior consistent across our libraries. In order to keep the refcounting working, a DONT_DESTROY macro similar to the one in sd-bus was introduced.
2014-06-24nspawn: create essential base directories at system bootupKay Sievers
This allows us to bootup a rootfs with a /usr directory only.
2014-06-23coredump: log coredump even if core dumping failsZbigniew Jędrzejewski-Szmek
Journal might be functional even if we cannot write to /var/lib/systemd/coredump.
2014-06-23coredump: retrieve comm information from /procZbigniew Jędrzejewski-Szmek
Kernel mangles comm information in an irreversible way when comm constains repeated spaces. Retrieve comm information from /proc, and only fallback to the information provided on the commandline when retrieving information from /proc fails. Add exe information to the list of saved xattr. https://bugs.freedesktop.org/show_bug.cgi?id=62043
2014-06-23fstab-generator: simplify add_root_mountZbigniew Jędrzejewski-Szmek