summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-09-04sd-login: rework error handlingLennart Poettering
Makre sure we always return sensible errors for the various, following the same rules, and document them in a comment in sd-login.c. Also, update all relevant man pages accordingly.
2015-09-04sd-event: make sure RT signals are not droppedLennart Poettering
RT signals operate in a queue, and we should be careful to never merge two queued signals into one. Hence, makes sure we only ever dequeue a single signal at a time and leave the remaining ones queued in the signalfd. In order to implement correct priorities for the signals introduce one signalfd per priority, so that we only process the highest priority signal at a time.
2015-09-04test: add one more test case for parse_pid()Lennart Poettering
2015-09-04nspawn: enable all controllers we can for the "payload" subcgroup we createLennart Poettering
In the unified hierarchy delegating controller access is safe, hence make sure to enable all controllers for the "payload" subcgroup if we create it, so that the container will have all controllers enabled the nspawn service itself has.
2015-09-04cgroup: always read the supported controllers from the root cgroup of the ↵Lennart Poettering
local container Otherwise we might end up thinking that we support more controllers than actually enabled for the container we are running in.
2015-09-04cgroup: fix potential access of uninitialized variableLennart Poettering
2015-09-04cgroup-util: make cg_pid_get_path() return -ENODATA when controller can't be ↵Lennart Poettering
found If the controller managed by systemd cannot found in /proc/$PID/cgroup, return ENODATA, the usual error for cases where the data being looked for does not exist, even if the process does.
2015-09-04cgroup: fix potential bad memory accessLennart Poettering
2015-09-04cgroup: make sure cg_is_empty_recursive() returns 1 for non-existing cgroupsLennart Poettering
Previously, on the legacy hierarchy a non-existing cgroup was considered identical to an empty one, but the unified hierarchy the check for a non-existing one returned ENOENT.
2015-09-04cgroup: when comparing agent paths, use path_equal()Lennart Poettering
After all a path is a path is a path and we should use path_equal() to comapre those.
2015-09-04audit: audit calls should return ENODATA when process are not in an audit ↵Lennart Poettering
session ENODATA is how we usually indicate such "missing info" cases, so we should do this here, too.
2015-09-04util: document why parse_uid() returns ENXIOLennart Poettering
parse_uid() returns EINVAL for invalid strings, but ENXIO for the (uid_t) -1 user ids in order to distinguish these two cases. Document this.
2015-09-04core: split up manager_get_unit_by_pid()Lennart Poettering
Let's move the actual cgroup part of it into a new separate function manager_get_unit_by_pid_cgroup(), and then make manager_get_unit_by_pid() just a wrapper that also checks the two pid hashmaps. Then, let's make sure the various calls that want to deliver events to the owners of a PID check both hashmaps and the cgroup and deliver the event to *each* of them. OTOH make sure bus calls like GetUnitByPID() continue to check the PID hashmaps first and the cgroup only as fallback.
2015-09-04cgroup: move controller to dirname translation into join_path_legacy()Lennart Poettering
Let's simplify things a bit.
2015-09-04util: add new uid_is_valid() callLennart Poettering
This simply factors out the uid validation checks from parse_uid() and uses them everywhere. This simply verifies that the passed UID is neither 64bit -1 nor 32bit -1.
2015-09-04macro: introduce new PID_TO_PTR macros and make use of themLennart Poettering
This adds a new PID_TO_PTR() macro, plus PTR_TO_PID() and makes use of it wherever we maintain processes in a hash table. Previously we sometimes used LONG_TO_PTR() and other times ULONG_TO_PTR() for that, hence let's make this more explicit and clean up things.
2015-09-03udev: ignore ENOEXEC from cgroup lookupDavid Herrmann
The recent cgroup-rework changed the error code for un-mounted cgroupfs to ENOEXEC. Make sure udev ignores it just like ENOENT and does not spill warnings on the screen.
2015-09-03cg_get_path: Removed unreachable statementreverendhomer
controller cannot be NULL because if-statement in L509 has return Coverity #1322379
2015-09-03Merge pull request #1123 from phomes/scope-no-bool-vs-intLennart Poettering
scope: do not compare a bool return with "<= 0"
2015-09-02tree-wide: fix indentationThomas Hindoe Paaboel Andersen
2015-09-02scope: do not compare a bool return with "<= 0"Thomas Hindoe Paaboel Andersen
2015-09-02Merge pull request #1119 from teg/virtio-namesKay Sievers
udev: net_id - support predictable ifnames on virtio buses
2015-09-02udev: net_id - support predictable ifnames on virtio busesTom Gundersen
Virtio buses are undeterministically enumerated, so we cannot use them as a basis for deterministic naming (see bf81e792f3c0). However, we are guaranteed that there is only ever one virtio bus for every parent device, so we can simply skip over the virtio buses when naming the devices.
2015-09-02Merge pull request #1116 from poettering/unified-rebasedLennart Poettering
core: unified cgroup hierarchy support
2015-09-02Merge pull request #1112 from poettering/sd-bus-container-fixesDavid Herrmann
machined and sd-bus container fixes
2015-09-02virt: detect parallels virtualizationEvgeny Vereshchagin
inspired by http://people.redhat.com/~rjones/virt-what/ see: * http://git.annexia.org/?p=virt-what.git;a=blob;f=virt-what.in;h=a5ed33ef3e4bfa3281c9589eccac4d92dff1babe;hb=HEAD#l200 * http://git.annexia.org/?p=virt-what.git;a=blob;f=virt-what.in;h=a5ed33ef3e4bfa3281c9589eccac4d92dff1babe;hb=HEAD#l253
2015-09-01core: unified cgroup hierarchy supportLennart Poettering
This patch set adds full support the new unified cgroup hierarchy logic of modern kernels. A new kernel command line option "systemd.unified_cgroup_hierarchy=1" is added. If specified the unified hierarchy is mounted to /sys/fs/cgroup instead of a tmpfs. No further hierarchies are mounted. The kernel command line option defaults to off. We can turn it on by default as soon as the kernel's APIs regarding this are stabilized (but even then downstream distros might want to turn this off, as this will break any tools that access cgroupfs directly). It is possibly to choose for each boot individually whether the unified or the legacy hierarchy is used. nspawn will by default provide the legacy hierarchy to containers if the host is using it, and the unified otherwise. However it is possible to run containers with the unified hierarchy on a legacy host and vice versa, by setting the $UNIFIED_CGROUP_HIERARCHY environment variable for nspawn to 1 or 0, respectively. The unified hierarchy provides reliable cgroup empty notifications for the first time, via inotify. To make use of this we maintain one manager-wide inotify fd, and each cgroup to it. This patch also removes cg_delete() which is unused now. On kernel 4.2 only the "memory" controller is compatible with the unified hierarchy, hence that's the only controller systemd exposes when booted in unified heirarchy mode. This introduces a new enum for enumerating supported controllers, plus a related enum for the mask bits mapping to it. The core is changed to make use of this everywhere. This moves PID 1 into a new "init.scope" implicit scope unit in the root slice. This is necessary since on the unified hierarchy cgroups may either contain subgroups or processes but not both. PID 1 hence has to move out of the root cgroup (strictly speaking the root cgroup is the only one where processes and subgroups are still allowed, but in order to support containers nicey, we move PID 1 into the new scope in all cases.) This new unit is also used on legacy hierarchy setups. It's actually pretty useful on all systems, as it can then be used to filter journal messages coming from PID 1, and so on. The root slice ("-.slice") is now implicitly created and started (and does not require a unit file on disk anymore), since that's where "init.scope" is located and the slice needs to be started before the scope can. To check whether we are in unified or legacy hierarchy mode we use statfs() on /sys/fs/cgroup. If the .f_type field reports tmpfs we are in legacy mode, if it reports cgroupfs we are in unified mode. This patch set carefuly makes sure that cgls and cgtop continue to work as desired. When invoking nspawn as a service it will implicitly create two subcgroups in the cgroup it is using, one to move the nspawn process into, the other to move the actual container processes into. This is done because of the requirement that cgroups may either contain processes or other subgroups.
2015-09-01Merge pull request #1098 from filbranden/cpuaffinity2Lennart Poettering
Getting rid of FOREACH_WORD_QUOTED and some more cleanup in config_parse_cpu_affinity2
2015-09-01Merge pull request #1107 from msekletar/selinux-get-raw-contextLennart Poettering
selinux: always use *_raw API from libselinux
2015-09-01sd-bus: when connecting to a container, don't fall back to host busLennart Poettering
We should never connect to the host bus as fallback if connecting to a container failed via one method. Otherwise connecting to a dbus1 container will always result in a connection to the host.
2015-09-01sd-bus: when connecting to a kdbus container bus pass error upLennart Poettering
We rely on the correct error used when opening the kdbus device node, hence let's make sure we pass it up from the namespaced child process to the process which actually wants to connect.
2015-09-01machined: introduce a ptsname_namespace() call and make use of itLennart Poettering
The call is like ptsname() but does not assume the pty path was accessible in the local namespace. It uses the same internal ioctl though.
2015-09-01machined: call unlockpt() in container, not hostLennart Poettering
It makes assumptions about the pty path, hence better call it in the container namespace rather than the host.
2015-09-01core: Log parse errors in config_parse_cpu_affinity2Filipe Brandenburger
2015-09-01Merge pull request #1111 from poettering/more-cgroup-fixesTom Gundersen
More cgroup fixes
2015-09-01Merge pull request #1099 from filbranden/joincontrollers2Lennart Poettering
Getting rid of FOREACH_WORD_QUOTED in config_parse_join_controllers
2015-09-01core: rework when we kill with which signalLennart Poettering
When the user wants to explicitly send our own PID a signal, then do so. Don't follow up SIGABRT with a SIGHUP if send_sighup is enabled. At that point the process should have segfaulted, hence there's no point in following up with a SIGHUP. Send only termination signals to ourselves, never KILL or ABRT signals.
2015-09-01core: don't allow changing the slice of a unit while it is activeLennart Poettering
2015-09-01unit: small clean-upsLennart Poettering
Always say when we ignore errors. Cast calls whose return value we knowingly ingore to (void). Use "bool" where we actually mean a boolean, even if we return it as an int later on.
2015-09-01core: when looking for the unit for a process, look at the PID hashmaps firstLennart Poettering
It's cheaper that going to cgroupfs, and also usually the better choice since it's not racy and can map PIDs even if they were moved to a different unit.
2015-09-01run: enable interactive authorizationEvgeny Vereshchagin
2015-09-01cgroup: the root cgroup is always populatedLennart Poettering
2015-09-01cgroup: drop "ignore_self" argument from cg_is_empty()Lennart Poettering
In all cases where the function (or cg_is_empty_recursive()) ignoring the calling process is actually wrong, as a process keeps a cgroup busy regardless if its the current one or another. Hence, let's simplify things and drop the "ignore_self" parameter.
2015-09-01cgroup: small cleanups and coding style fixesLennart Poettering
A number of simplications and adjustments to brings things closer to our coding style.
2015-09-01cgroup: don't allow hidden cgroupsLennart Poettering
We really should care for all cgroups, and not allow hidden ones.
2015-09-01cgroup: never migrate kernel threads out of the root cgroupLennart Poettering
It won't work anyway.
2015-09-01Merge pull request #1108 from phomes/dont-shadow-globalsDavid Herrmann
tree-wide: do not shadow the global var timezone
2015-09-01tree-wide: do not shadow the global var timezoneThomas Hindoe Paaboel Andersen
2015-09-01units: enable waiting for unit termination in certain casesLennart Poettering
The legacy cgroup hierarchy does not support reliable empty notifications in containers and if there are left-over subgroups in a cgroup. This makes it hard to correctly wait for them running empty, and thus we previously disabled this logic entirely. With this change we explicitly check for the container case, and whether the unit is a "delegation" unit (i.e. one where programs may create their own subgroups). If we are neither in a container, nor operating on a delegation unit cgroup empty notifications become reliable and thus we start waiting for the empty notifications again. This doesn't really fix the general problem around cgroup notifications but reduces the effect around it. (This also reorders #include lines by their focus, as suggsted in CODING_STYLE. We have to add "virt.h", so let's do that at the right place.) Also see #317.
2015-09-01core: add OOM check in config_parse_join_controllersFilipe Brandenburger