| Age | Commit message (Collapse) | Author |
|---|
|
The file should have been in /usr/lib/ in the first place, since it
describes the OS container in /usr (and not the configuration in /etc),
hence, let's support os-release files in /usr/lib as fallback if no
version in /etc exists, following the usual override logic.
A prior commit already enabled tmpfiles to create /etc/os-release as a
symlink to /usr/lib/os-release should it be missing, thus providing nice
compatibility with applications only checking in /etc.
While it's probably a good idea if all apps check both locations via a
fallback logic, it is only necessary in the early boot process, as long
as the /etc/os-release symlink has not been restored, in case we boot
with an empty /etc.
|
|
For most NSS calls it is documented that they return NULL + errno=0 when
an entry is not found. However, in reality it appears to be common to
return NULL + errno=ENOENT, instead. Handle that correctly, and don't
consider ENOENT a systematic error.
|
|
With this in place RPMs can make sure that whatever they drop in is
immeidately applied, and not delayed until next reboot.
This also moves systemd-sysusers back to /usr/bin, since hardcoding the
path to /usr/lib in the macros would mean compatibility breaks in
future, should we turn sysusers into a command that is actually OK for
people to call directly. And given that that is quite likely to happen
(since it is useful to prepare images with its --root= switch), let's
just prepare for it.
|
|
this gives us a little bit more freedom to move things around later on,
as we don't hardcode the systemd paths in old RPMs that shall work with
new systemds.
|
|
|
|
int unit_file_mask(...) in ./src/shared/install.c calls
get_config_path(...) which can in 4 error cases return without setting
"ret", and thus "prefix" can be uninitialized when unit_file_mask(...)
finishes (which it does directly after the error is returned from
get_config_path(...)).
|
|
static bool enable_name_policy(...) in ./src/udev/net/link-config.c
calls proc_cmdline(...) to get "line" initialized, but
proc_cmdline(...) does not guarantee that atleast when both
conditions (detect_container(NULL) > 0) and
read_full_file(...) returned < 0.
|
|
static int killall(....) in ./src/core/killall.c tries to get "s"
initialized by calling get_process_comm(...) which calls
read_one_line_file(...) which if it fails will mean it is left
uninitialized.
It is then used in argument to strna(s) call where it is
dereferenced(!), in addition to nothing else initializing it before
the scope it is in finishes.
|
|
static int client_send_request(...) in
./src/libsystemd-network/sd-dhcp-client.c tries to initialize
"request" by calling client_message_init(...), which has atleast
5 error cases where it can return without that happening.
This leads to the function finishing without "request" being initialized.
|
|
Still add some whitespace betwen ifname and the message to get the
messages aligned (as I find it easier to spot specific messages this way).
|
|
When enabled in [Network] it will set up a dhcp server on the interface, listening
on one of its statically configured IPv4 addresses and with a fixed size pool of
leases determined from it.
Example:
[Match]
Name=ve-arch-tree
[Network]
Address=192.168.12.5/24
DHCPServer=yes
[Route]
Gateway=192.168.12.5
Destination=192.168.12.0/24
In this case we will configure ve-arch-tree with the address 192.168.12.5 and
hand out addresses in the range 192.168.12.6 - 192.168.12.38.
In the future, we should (as suggested by Lennart) introduce a syntax to pick the
server address automatically.
|
|
|
|
|
|
Make sure we don't hand out the same IP twice. We still don't
handle lease expiry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We would like to use the UDP socket, but we cannot as we need to specify
the MAC address manually.
|
|
Parse the maximum message size the client can accept and the client id, falling back to
sane defaults if they are not set.
|
|
|
|
We will (at least at first), restrict our focus to running the server
on at most one interface.
|
|
Bind to UDP socket and listen for messages, discarding anything we receive.
|
|
|
|
For this to work nicely we need to use REUSEADDR so that more than one socket
can be open at the same time. Also, we request the ifindex to be appended
to incoming messages, so we know whence it came.
|
|
This new condition allows checking whether /etc or /var are out-of-date
relative to /usr. This is the counterpart for the update flag managed by
systemd-update-done.service. Services that want to be started once after
/usr got updated should use:
[Unit]
ConditionNeedsUpdate=/etc
Before=systemd-update-done.service
This makes sure that they are only run if /etc is out-of-date relative
to /usr. And that it will be executed after systemd-update-done.service
which is responsible for marking /etc up-to-date relative to the current
/usr.
ConditionNeedsUpdate= will also checks whether /etc is actually
writable, and not trigger if it isn't, since no update is possible then.
|
|
/usr has changed
In order to support offline updates to /usr, we need to be able to run
certain tasks on next boot-up to bring /etc and /var in line with the
updated /usr. Hence, let's devise a mechanism how we can detect whether
/etc or /var are not up-to-date with /usr anymore: we keep "touch
files" in /etc/.updated and /var/.updated that are mtime-compared with
/usr. This means:
Whenever the vendor OS tree in /usr is updated, and any services that
shall be executed at next boot shall be triggered, it is sufficient to
update the mtime of /usr itself. At next boot, if /etc/.updated and/or
/var/.updated is older than than /usr (or missing), we know we have to
run the update tools once. After that is completed we need to update the
mtime of these files to the one of /usr, to keep track that we made the
necessary updates, and won't repeat them on next reboot.
A subsequent commit adds a new ConditionNeedsUpdate= condition that
allows checking on boot whether /etc or /var are outdated and need
updating.
This is an early step to allow booting up with an empty /etc, with
automatic rebuilding of the necessary cache files or user databases
therein, as well as supporting later updates of /usr that then propagate
to /etc and /var again.
|
|
|
|
|
|
|
|
|
|
Beef up the assert to protect against passing null to strlen.
Found with scan-build.
|
|
|
|
|
|
static files
systemd-sysusers is a tool to reconstruct /etc/passwd and /etc/group
from static definition files that take a lot of inspiration from
tmpfiles snippets. These snippets should carry information about system
users only. To make sure it is not misused for normal users these
snippets only allow configuring UID and gecos field for each user, but
do not allow configuration of the home directory or shell, which is
necessary for real login users.
The purpose of this tool is to enable state-less systems that can
populate /etc with the minimal files necessary, solely from static data
in /usr. systemd-sysuser is additive only, and will never override
existing users.
This tool will create these files directly, and not via some user
database abtsraction layer. This is appropriate as this tool is supposed
to run really early at boot, and is only useful for creating system
users, and system users cannot be stored in remote databases anyway.
The tool is also useful to be invoked from RPM scriptlets, instead of
useradd. This allows moving from imperative user descriptions in RPM to
declarative descriptions.
The UID/GID for a user/group to be created can either be chosen dynamic,
or fixed, or be read from the owner of a file in the file system, in
order to support reconstructing the correct IDs for files that shall be
owned by them.
This also adds a minimal user definition file, that should be
sufficient for most basic systems. Distributions are expected to patch
these files and augment the contents, for example with fixed UIDs for
the users where that's necessary.
|
|
|
|
|
|
files/directories
This way it makes a lot more sense to specify an access mode for "Z"
lines.
|
|
|
|
If two lines refer to paths that are suffix and prefix of each other,
then always process the prefix first, the suffix second. In all other
cases strictly process rules in the order they appear in the files.
This makes creating /var/run as symlink to /run a lot more fun, since it
is automatically created first.
|
|
should be prefixed with arg_
|
|
such as /var
|
|
Let's allow booting up with /var empty. Only create the most basic
directories to get to a working directory structure and symlink set in
/var.
|
|
"m" so far has been a non-globbing version of "z". Since this makes it
quite redundant, let's get rid of it. Remove "m" from the man pages,
beef up "z" docs instead, and make "m" nothing more than a compatibility
alias for "z".
|
|
|
|
|
|
|
|
Not that it really would have any effect on the generated code, but
let's not confuse people...
|
